\input texinfo   @c -*-texinfo-*-
@c %**start of header
@setfilename emms.info
@settitle The Emms Manual
@c %**end of header

@c Maintainer comments:
@c There is always work to do in a manual.

@dircategory Emacs
@direntry
* Emms: (emms).           The Emacs Multimedia System
@end direntry

@copying
 @copyright{} (c) 2004, 2005
   Yoni Rabkin, Jorgen Schaefer, Mario Domgoergen
@quotation
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1 or
any later version published by the Free Software Foundation; with no
Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.  A
copy of the license is included in the section entitled "GNU Free
Documentation License".
@end quotation
@end copying

@c For printed material
@titlepage
@title The Emms Manual

@page
@vskip 0pt plus 1filll
@insertcopying
@end titlepage

@contents
@c END For printed material

@ifnottex
@node Top, Copying, (dir), (dir)
@top Emms Manual

This is the Manual for the Emacs Multimedia System
@c FIXME: This is the last thing that needs to be done after the
@c manual is fixed.
@menu
* Copying::             The GNU General Public License gives you permission to
                            redistribute Emms on certain terms; it also explains
                            that there is no warranty.
* The GNU FDL::         The license for this documentation.

Starting out
* Introduction::        Introduction to Emms.
* Installation::        How to install Emms on your System.
* Quick Setup::         Quick start in Emms.
* Configuration Example::     Bare bones configuration.

Emms basics
* Basic Commands::      How to control Emms with ease.
* The Core File::       The inner core of Emms.
* Sources::             Sources for playlists-creation.
* Simple Players::      Some simple players.

Advanced Features
* Info Tags::           More narrative track descriptions.
* The Playlist Buffer:: Interactive Playlist.
* Extending Emms::           How to define new players and modules.
* Streaming Audio::          Interface to streaming audio.

Indices
* Concept Index::
* Function Index::
* Variable Index::
* Keybinding Index::

@c FIXME: the detailed listing needs to be re-generated after the
@c above is finished.
@detailmenu
--- The Detailed Node Listing ---

Here are some other nodes which are really inferiors of the ones
already listed, mentioned here so you can get to them in one step:

Installation
* Compiling Emms::      Compiling Emms into Byte-Code

Info Tags
* Ogg Info::    Reading ogg info tags
* MP3 Info::    Reading mp3 info tags
@end detailmenu

The Playlist Buffer
* Playlist Buffer::     Browsing buffer known by other players

Extending Emms
* New Player::  How to define a new player

New Player
* Simple Player for @command{play}:: Example player using @command{play}
* More Complex Player:: Example of a complex player using @command{mpg321}
@end menu

@end ifnottex

@c including the relevant licenses
@include gpl.texi
@include fdl.texi

@node Introduction
@chapter Introduction

@cindex introduction

Emms is the Emacs Multi-Media System. It tries to be a clean and small
application to play multimedia files from Emacs using external
players. Many of its ideas are derived from MpthreePlayer
(http://www.nongnu.org/mp3player), but it tries to be more general and
more clean.

The basic functionality of Emms consists of three parts: The core, the
sources, and the players.

The core resides in @file{emms.el}, and provides a simple playlist and the
basic functionality to use all the other features of Emms. It provides
the common user commands and interfaces for other parts. It thinks in
tracks, where a track is the combination of a type and a name - e.g.
the track type 'file has a name that is the file name. Other track
types are possible.

To get to tracks, the core needs sources. The file @file{emms-source-file.el}
provides simple sources to interact with the file system.

When Emms finally has the sources in the playlist, it needs a player
to play them. @file{emms-player-simple.el} defines a few useful players, and
allows you to define your own in a very simple way.

The way Emms works is easy to customize with your own code or by using
`M-x customize'. It is possible to extend Emms with the extra modules
shipped with Emms. @xref{Extending Emms}.

@node Installation
@chapter Installation

@cindex installation

You need to put all the .el files of emms in a directory in your
load-path. For example, if you put all those files into ~/elisp/emms/,
then in your ~/.emacs, you should do:

@lisp
(add-to-list 'load-path "~/elisp/emms/")
@end lisp
@noindent

@menu
* Compiling Emms::      Compiling Emms into Byte-Code
@end menu

@node Compiling Emms
@section Compiling Emms

@cindex compiling

You can byte-compile Emms by first entering the directory containing the
Emms source code, followed by invoking:

@command{make}

Which will byte compile Emms. You can then invoke:

@command{make install}

Which will install Emms into your Emacs directories (provided you have
the appropriate permissions to do so on your system).

Note that Emms is a light-weight and agile program, you can therefore
run Emms just fine without byte compiling it.

@node Quick Setup
@chapter Quick setup

Emms is quite simple to set up. For the most basic needs, you will
just need the following line,

@lisp
(require 'emms)
@end lisp
@noindent

which installs the core of Emms.

Now we need to do some configuration.
@c FIXME: Renaming of emms-default? New user levels?
The Emms module `emms-default' provides the function `emms-setup',
which is a way to quickly configure your Emms. You can add any number
of directories which contain media. The first argument is the
complexity level of the user interface. Here's an example:

@lisp
(require 'emms-default)
(emms-setup 'tiny "directory")
@end lisp

Here is a list of the interface complexity options:
@table @samp
@item minimalistic
Define the players and play directory but nothing more.
@item tiny
Features the above plus the playlist buffer mode. Use this for a
minimalistic installation plus a user interface to the playlists.
@item default
Features the above plus the reading the info from tagged Mp3 and Ogg
files.
@end table

Now your configuration is done.

The (optional) directory is used for
`emms-source-file-default-directory', in case you were wondering.

@node Configuration Example
@chapter Configuration Example

@cindex Configuration Example

The following code fragment provides a minimal Emms setup without
using the layer of `emms-default'. It can maybe be used to better
understand the internals of Emms. You can see how Emms needs to know
about players (these are defined in `emms-player-simple') and about
sources for tracks (trivial file system based sources, such as this
`emms-directory-tree', are defined in `emms-source-file').

@lisp
(require 'emms-player-simple)
(require 'emms-source-file)
(setq emms-player-list '(emms-player-mpg321
                         emms-player-ogg123
                         emms-player-mplayer))
@end lisp

For a discussion on how to define additional players, see @xref{Simple
Players}.

Much of the behaviour of Emms can be changed by setting
variables. Here is an example. The first `setq' turns off the
asynchronous updating of info tags. The second sets the default name
of the Emms playlist buffer.

@lisp
(setq emms-info-asynchronously nil)
(setq emms-playlist-buffer-name "*Music*")
@end lisp

Another way to change Emms variables is to use the M-x
@command{customize} mechanism provided by Emacs.

@node Basic Commands
@chapter Basic Commands

@cindex basic commands
@cindex commands, basic

Before you can use the interface commands, you need a playlist to
start with. The following commands allow you to add to the current
playlist from different sources:

Note that the commands with the ``emms-add-'' prefix add the source to
the playlist but do not start playing it immediately. Conversely, the
commands with the ``emms-play-'' prefix begin playing the track
immediately.

@defun emms-play-file file
A source for a single file - either @var{file}, or queried from the
user.
@end defun
@defun emms-add-file file
A source for a single file - either @var{file}, or queried from
the user.
@end defun
@defun emms-play-directory dir
A source for a whole directory tree - either @var{dir}, or queried
from the user.
@end defun
@defun emms-add-directory dir
A source for a whole directory tree - either @var{dir}, or queried
from the user.
@end defun
@defun emms-play-directory-tree dir
A source for multiple directory trees - either @var{dir}, or the
value of @var{emms-source-file-default-directory}.
@end defun
@defun emms-add-directory-tree dir
A source for multiple directory trees - either @var{dir}, or the
value of @var{emms-source-file-default-directory}.
@end defun
@defun emms-play-url url
A source for an @var{url} - for example, for streaming.
@end defun
@defun emms-add-url url
A source for an @var{url} - for example, for streaming.
@end defun
@defun emms-play-m3u-playlist playlist
A source for the M3u playlist format from the file @var{playlist}.
@end defun
@defun emms-add-m3u-playlist playlist
A source for the M3u playlist format from the file @var{playlist}.
@end defun
@defun emms-play-find dir regexp
A source that will find files in @var{dir} or
@var{emms-source-file-default-directory} which match @var{regexp}.
@end defun
@defun emms-add-find dir regexp
A source that will find files in @var{dir} or
@var{emms-source-file-default-directory} which match @var{regexp}.
@end defun

The basic functionality of Emms is just to play music without being
noticed. It provides a few commands to skip the current track and
such, but other than that it doesn't show up. Emms provides the
following basic user commands (which you might want to bind to
keystrokes):

@defun emms-start
Start playing the current playlist
@end defun
@defun emms-stop
Stop playing
@end defun
@defun emms-next
Start playing the next track in the playlist
@end defun
@defun emms-previous
Start playing previous track in the playlist
@end defun
@defun emms-shuffle
Shuffle the current playlist. This uses
@var{emms-playlist-shuffle-function}.
@end defun
@defun emms-sort
Sort the current playlist. This uses
@var{emms-playlist-sort-function}.
@end defun
@defun emms-show &optional insertp
Describe the current Emms track in the minibuffer. If @var{insertp} is
non-nil, insert the description into the current buffer instead. This
function uses @var{emms-show-format} to format the current track.
@end defun

@node The Core File
@chapter The Core File
@c FIXME: go over all these first, then add new ones. Also divide
@c these into subsections to keep the overall size down.
The core file @file{emms.el} provides the all basic functions for
playing music, generating playlists and defining players.

@menu
* User Variables::     Variables for the user to tweak.
* Hooks::              Hooks for important Emms functions.
* Core Functions::     Providing the basic functionality of Emms.
@end menu

@node User Variables
@section User Variables
The core file defines a number of user variables.

@defopt emms-player-list
A list of players Emms can use. You need to set this in order to use
Emms to play media.
@end defopt
@defopt emms-show-format
The format to use for @command{emms-show}. Any "%s" is replaced by
what @var{emms-track-description-function} returns for the currently
playing track.
@end defopt
@defopt emms-repeat-playlist
Non-nil if the Emms playlist should automatically repeat the playlist.
If nil, playback will stop when the last track finishes playing.
@end defopt
@defopt emms-track-description-function
Function for describing an Emms track in a user-friendly way.
@end defopt
@defopt emms-sort-lessp-function
A function that compares two tracks, and returns non-nil if the first
track should be sorted before the second (see also @code{sort}).
@end defopt

@node Hooks
@section Hooks
The core file provides hook variables for the basic functionality of
Emms.

@defopt emms-player-started-hook
A hook run when an Emms player started playing.
@end defopt
@defopt emms-player-stopped-hook
A hook run when an Emms player stopped playing. See also
@var{emms-player-finished-hook}.
@end defopt
@defopt emms-playlist-source-inserted-hook
Hook run when a source got inserted into the playlist. The buffer is
narrowed to the new tracks.
@end defopt
@defopt emms-playlist-selection-changed-hook
Hook run after another track is selected in the Emms playlist.
@end defopt
@defopt emms-playlist-cleared-hook
Hook run after the current Emms playlist is cleared. This happens both
when the playlist is cleared and when a new buffer is created for it.
@end defopt
@defopt emms-player-finished-hook
Hook run when an Emms player finishes playing a track. Please pay
attention to the differences between @var{emms-player-finished-hook}
and @var{emms-player-stopped-hook}. The former is called only when the
player is stopped interactively; the latter, only when the player
actually finishes playing a track.
@end defopt
@defopt emms-player-paused-hook
Hook run when a player is paused or resumed. Use
@var{emms-player-paused-p} to find the current state.
@end defopt

@node Core Functions
@section Core Functions
The core file also defines all the functions important to the basic
use of Emms.
@c FIXME: sort these so that they make sense

There are functions which deal with movement in the playlist.

@defun emms-next-noerror
Start playing the next track in the Emms playlist. Unlike
@code{emms-next}, this function doesn't signal an error when called at
the end of the playlist. This function should only be called when no
player is playing. This is a good function to put in
@code{emms-player-finished-hook}.
@end defun
@defun emms-playlist-next
Move to the previous track in the current buffer.
@end defun
@defun emms-playlist-previous
Move to the previous track in the current buffer.
@end defun
@defun emms-random
Jump to a random track.
@end defun
@defun emms-toggle-repeat-playlist
Toggle whether emms repeats the playlist after it is done. See
@var{emms-repeat-playlist}.
@end defun
@defun emms-toggle-repeat-track
Toggle whether emms repeats the current track. See
@var{emms-repeat-track}.
@end defun

Some functions deal with the getting and setting track information.

@defun emms-track type name
Create a track with type @var{type} and name @var{name}.
@end defun
@defun emms-track-type track
Return the type of @var{track}.
@end defun
@defun emms-track-name track
Return the name of @var{track}.
@end defun
@defun emms-track-get name track &optional inexistent
Return the value of @var{name} for @var{track}. If there is no value,
return @var{default} (or nil, if not given).
@end defun
@defun emms-track-set track name value
Set the value of @var{name} for @var{track} to @var{value}.
@end defun
@defun emms-track-description track
Return a description of @var{track}. This function uses
@var{emms-track-description-function}.
@end defun
@defun emms-player-for track
Return an Emms player capable of playing @var{track}. This will be the
first player whose PLAYABLEP function returns non-nil, or nil if no
such player exists.
@end defun
@defun emms-playlist-current-selected-track
Return the currently selected track in the current playlist.
@end defun

There are also functions which deal with the playing itself.

@defun emms-player-start track
Start playing @var{track}.
@end defun
@defun emms-player-stop
Stop the currently playing player.
@end defun
@defun emms-player-stopped
Declare that the current Emms player is finished.
This should only be done by the current player itself.
@end defun
@defun emms-seek seconds
Seek the current player @var{seconds} seconds.  This can be a floating
point number for sub-second fractions.  It can also be negative to
seek backwards.
@end defun
@defun emms-seek-forward
Seek ten seconds forward.
@end defun
@defun emms-seek-backward
Seek ten seconds backward.
@end defun
@defun emms-sort-track-name-less-p a b
Return non-nil if the track name of @var{A} sorts before @var{B}.
@end defun
@defun emms-ensure-player-playing-p
Raise an error if no player is playing right now.
@end defun

For more basic commands defined in the core file see @xref{Basic
Commands}.

@node Sources
@chapter Sources

@cindex sources

@defopt emms-source-file-default-directory
The default directory to look for media files.
@end defopt
@c FIXME: go over all these first, then add new ones
@defun emms-play-find
Play all files in @var{emms-source-file-default-directory} that match
a specific regular expression.
@end defun
@defun emms-play-dired
Play marked files from the current dired buffer
@end defun
@defun emms-play-playlist
Play all files from a playlist file.
@end defun
@defun emms-source-file &optional file
An Emms source for a single file - either @var{file}, or queried from the
user.
@end defun
@defun emms-source-files files
An Emms source for a list of @var{files}.
@end defun
@defun emms-source-directory &optional dir
An Emms source for a whole directory tree - either @var{dir}, or queried
from the user
@end defun
@defun emms-source-directory-tree & optional dir
An Emms source for multiple directory trees - either @var{dir}, or the
value of @var{emms-source-file-default-directory}.
@end defun
@defun emms-source-find &optional dir regex
An Emms source that will find files in @var{dir} or
@var{emms-source-file-default-directory} that match @var{regexp}.
@end defun
@defun emms-source-file-directory-tree &optional dir
Return a list of all files under @var{dir} that match @var{regex}.
@end defun
@defun emms-source-playlist-file file
Return all files from playlist @var{file}.
@end defun
@defun emms-source-dired
Play all marked files of a dired buffer
@end defun
@defun emms-source-file-regex
Return a regexp that matches everything any player (that supports
files) can play.
@end defun
@defun emms-save-playlist filename
Export the current playlist as to @var{filename}. See also
@command{emms-source-playlist-file}.
@end defun
@defun emms-locate
Search for REGEXP and display the results in a locate buffer
@end defun

@node Simple Players
@chapter Simple Players

@cindex players, simple

@defmac define-emms-simple-player
Returns a simple player with the use of emms-define-player.
NAME is used to construct the name of the function like
emms-player-NAME. REGEX must be a regexp that matches the
filenames the player can play. COMMAND specifies the command line
argument to call the player and ARGS are the command line
arguments.
@end defmac
@c FIXME: add example section with a simple player definition.
@defun emms-player-simple-stop
Stop the currently playing process, if indeed there is one
@end defun
@defun emms-player-simple-start
Starts a process playing FILENAME using the specified CMDNAME with
the specified PARAMS.
@end defun
@defun emms-player-simple-sentinel
Sentinel for determining the end of process
@end defun

@node Info Tags
@chapter Info Tags

@cindex track information

The file @file{emms-info.el} provides an interface for different
methods of reading info about the files that Emms is playing, and
displaying it.

To create a method for retrieving info about a file, you create an
object like this:

@lisp
(define-emms-info-method emms-info-mp3info
  :providep 'emms-info-mp3info-providep
  :get 'emms-info-mp3info-get
  :set 'emms-info-mp3info-set)
@end lisp
@noindent

Then you register it with emms-info, by adding it to
@var{emms-info-methods-list}.

If you wish to use 'emms-info-mp3info' you will need the mp3info
program which is available at http://www.ibiblio.org/mp3info/.
Otherwise Emms will display an error when you attempt to access MP3
info.

@lisp
(add-to-list 'emms-info-methods-list 'emms-info-mp3info)
@end lisp
@noindent

There are already two predefined methods for retrieving info

@menu
* Ogg Info::    Reading ogg info tags
* MP3 Info::    Reading mp3 info tags
@end menu
@c FIXME: check that these still exist
@defun emms-info-get-cached track
Return cached info for the track @var{track}, nil of no cache.
@end defun
@defun emms-info-set-cached
Set cached info for @var{track} to @var{info}
@end defun
@defun emms-info-method-for track
Return an info-method suitable for @var{track}.
@end defun
@defun emms-info-get track &optional dont-use-cached
Return an emms-info structure representing the track @var{track}.
if @var{dont-USE-CACHED} is non-nil, then always read from the file.
@end defun
@defun emms-info-get-multiple callback tracks &optional dont-use-cached
Asynchronously get all info tags from the tracks in the listlaw
@var{tracks}. For each file, call @var{callback} with the track and the info
structure.
@end defun
@defun emms-info-set track info
Set the info of the file @var{track} to the emms-info structure @var{info}.
@end defun
@defun emms-info-file-info-song-artist track
Returns a description of @var{track}, build from it's comments.

If @var{emms-info-methods-list} indicates how to retrieve special info
about it, use this. Otherwise returns the name alone.
@end defun

@defopt emms-info-methods-list
List of info-methods. You need to set this!
@end defopt
@defopt emms-info-cache
Boolean value, indicating whether or not to use a cache for
info-structures.
@end defopt
@defopt emms-info-get-multiple-idletime
The number of seconds emacs should be idle to get the next info.
Increase this if emacs becomes unresponsive when building the
playlist.
@end defopt

@c FIXME: update this to emms-info-ogginfo.el
@node Ogg Info
@section Ogg Info
The file @file{emms-info-ogg.el} provides an interface to retrieving
comments from ogg-files, using Lawrence Mitchells ogg-comment.el.

To activate, put something like this in your ~/.emacs:

@lisp
(require 'emms-info-ogg)
(add-to-list 'emms-player-alist
             '("\\.ogg$" . emms-info-ogg-comments))
@end lisp
@noindent

Of course, you'll also need a player if you want to actually play the
files.

@defun emms-info-ogg-comment-providep
Return non-nil if this info-method provides info for the track.
@end defun
@defun emms-info-ogg-get-comment
@end defun
@defun emms-info-ogg-comment-get
Retrieve an emms-info structure as an ogg-comment
@end defun

@c FIXME: update this for the latest version of mp3info
@node MP3 Info
@section MP3 Info

This code has been adapted from code found in mp3player.el, written by
Jean-Philippe Theberge @email{jphiltheberge@@videotron.ca}, Mario Domgoergen
@email{kanaldrache@@gmx.de} and Jorgen Schäfer @email{forcer@@forcix.cx}

To activate this method for getting info, use something like:

@lisp
(require 'emms-info-mp3info)
(add-to-list 'emms-info-methods-alist
             '("\\.mp3$" . emms-info-mp3info))
@end lisp
@noindent

Of course, you'll also need a player if you want to actually play the
files.

@defun emms-info-mp3info-providep
Return non-nil if this info-method provides info for the track.
@end defun
@defun emms-info-mp3info-set track info
Set the id3v1 tag of file @var{track} to id3info @var{info}, using the
@var{mp3info-program}.
@end defun
@defun emms-info-mp3info-get track
Get the id3v1 tag of file @var{track}, using the mp3info-program and
return an emms-info structure representing it.
@end defun

@defopt emms-info-mp3info-program-name
*The name/path of the mp3info-program.
@end defopt

@node The Playlist Buffer
@chapter The Playlist Buffer
@cindex playlist buffer

@c FIXME: maybe a re-write?
@menu
* Playlist Buffer::     Browsing buffer known by other players
@end menu

@c FIXME: update this with the new keymap.
@node Playlist Buffer
@section Playlist buffer

@table @code
@findex emms-pbi
@item emms-pbi
Switch to playlist buffer

The playlist-buffer *Playlist* will be created and put into
emms-pbi-mode, which give you some usefull keybinings
@end table

@table @kbd
@item ?
@kindex ? (Emms-pbi)
@findex describe-mode
Describe the keybindings
@item <mouse-2>
@kindex <mouse-2> (Emms-pbi)
@findex emms-pbi-play-current-line
Play the current line
@item RET
@kindex RET (Emms-pbi)
@findex emms-pbi-play-current-line
Play the current line
@item q
@kindex q
@findex bury-buffer
@item Q
@kindex Q
@findex emms-pbi-quit
Stops emms and kill the playlist buffer
@item f
@kindex f
@findex emms-pbi-show-current-line
Show the trackname on current line
@item s
@kindex s
@findex emms-stop
Stop Emms
@item C-y
@kindex C-y
@findex emms-pbi-yank
Yank a filename from @var{emms-kill-ring} into the playlist.
@item C-k
@kindex C-k
@findex emms-pbi-kill-line
Kill the current line from the playlist.

Send the filename to the @var{emms-kill-ring}. Make sure hooks that regenerate
the entire playlist aren't run.
@item c
@kindex c
@findex emms-pbi-recenter
Center on current playing track
@item p
@kindex p
@findex emms-previous
Play the previous track in the playlist.
@item n
@kindex n
@findex emms-next
Play the next track in the playlist.
This might behave funny in @var{emms-player-stopped-hook}, use
@var{emms-next-noerror} instead for that.
@item C-x C-s
@kindex C-x C-s
@findex emms-pbi-export-playlist
Export the current playlist as to FILENAME. See also:
@var{emms-pbi-import-playlist}.
@end table

@c FIXME: update these as well.
@defun emms-pbi
Turn on emms-playlist if prefix argument ARG is a positive integer,
off otherwise.
@end defun
@defun emms-pbi-shorten-entry-to-max-length
Cut off an entry-text to make sure it's no longer than
`emms-pbi-playlist-entry-max-length' characters long.
@end defun
@defun emms-pbi-entry-info-updated
Update the track-entry based on the info
@end defun
@defun emms-pbi-rebuild-playlist-buffer
This function rebuilds the playlist-buffer if necessary.
@end defun
@defun emms-pbi-build-playlist-buffer
Build a playlist-buffer based on the current playlist.
@end defun
@defun emms-pbi-insert-tag
Insert the TRACK tag at point.
The tag is automatically shortened by
@command{emms-pbi-shorten-entry-to-max-length'}.
@end defun
@defun emms-pbi-insert-entry
Insert an entry in the playlist
@end defun
@defun emms-pbi-async-alternative-text filename
Generates a single replacement-text for @var{filename}, to be
displayed in the playlist while the info is being loaded.
@end defun
@defun emms-pbi-update-current-face
Updates the file line with the current-face
@end defun
@defun emms-pbi-add-properties-current-line
Adds the correct faces and other properties to the current line
@end defun
@defun emms-pbi-play-current-line
Play the current line
@end defun
@defun emms-pbi-show-current-line
Show filename and info for track on current line.
@end defun
@defun emms-pbi-export-playlist filename
Export the current playlist as to @var{filename}.
@end defun
@defun emms-pbi-quit
Stops emms and kill the playlist buffer
@end defun
@defun emms-pbi-kill-line
Kill the current line from the playlist.

Send the filename to @var{emms-kill-ring}. Make sure hooks that
regenerate the entire playlist aren't run.
@end defun
@defun emms-pbi-yank
Yank a filename from `kill-ring' into the playlist.
@end defun
@defun emms-pbi-return-current-line-index
Return the index position in the playlist of the current line.
@end defun
@defun emms-pbi-recenter
Center on current playing track
@end defun

@defopt emms-pbi-playlist-entry-generate-function
The function to call for generating a single item of the
playlist. This will be called with a string argument FILENAME, and
should return the text to be inserted in the playlist.
@end defopt
@defopt emms-pbi-playlist-entry-max-length
The maximum length of an entry in the playlist. If this is nil, the
entire string provided by `emms-track-description-function'. will be
used. Beware, the output of that function is cut off to fit the
max-length before running `emms-pbi-playlist-entry-generate-function'.
@end defopt
@defopt emms-pbi-async-alternative-text-function
The function to call for generating the replacement-text for a
playlist-item, while the info is lazy-loading. This will be called
with a string argument FILENAME, and should return the text to be
processed by emms-pbi-playlist-entry-generate-function.
@end defopt
@defopt emms-pbi-playlist-buffer-name
Name of the buffer to use as a playlist-buffer
@end defopt
@defopt emms-pbi-load-info-async
Whether or not to use emms-info.el's features for async loading
info. Defaults to t when emms-info is available, and nil otherwise.
@end defopt
@defopt emms-pbi-after-build-hook
Hook that is run after the playlist buffer is built.
That might be usefull to change the playlist buffer before the
buffer is set read-only.
@end defopt
@defopt emms-pbi-current-line-face-changed-hook
Hook that is called when the face of the current line changes.
@end defopt
@defopt emms-pbi-manually-change-song-hook
Hook that is called when the song is manually changed.
@end defopt

@c FIXME: what is the fate of these? I'll comment them out for the
@c time being.

@c @node Playlist Manipulation
@c @section Playlist Manipulation

@c The file @file{emms-pl-manip} offers various advanced playlist-manipulations functions for
@c Emms.

@c Basically just load up this file, and check out some of these
@c functions.

@c @defun vector-sort vec pred &optional beg end
@c Sort a vector @var{vec}, using the predicate @var{pred}, and return the new
@c vector. If @var{beg} and @var{end} are specified, sort only this subrange.

@c @var{pred} is called with 2 elements and should return true, if the first is
@c less than the other.
@c @end defun
@c @defun emms-pl-manip-sort by pred
@c Sorts the Emms-playlist, by applying @var{by} as a function to each
@c filename in the list, and then comparing the results with @var{pred}.
@c @end defun
@c @defun emms-pl-manip-sort-by-filename

@c @end defun
@c @defun emms-pl-manip-sort-by-name

@c @end defun
@c @defun emms-pl-manip-sort-by-info-artist
@c Sort the playlist, using
@c @end defun
@c @defun emms-playlist-reshuffle
@c Reshuffle the playlist.
@c @end defun

@c @node Scoring
@c @chapter Scoring

@c Scoring allows you to assign scores to individual files and play media
@c according to your mood.

@c When you load @file{emms-score}, you are set to a default mood 'emms-default-mood'
@c A mood is a one word string describing how you feel (like "funny",
@c "tired", "aggressive"...)  Each mood have is own set of scoring rules.

@c You can change your mood with M-x @command{emms-score-change-mood}

@c Every music file start with a default score of 0 the command
@c emms-score-up-current and emms-score-down-current modify the score of
@c the file you are currently listening by 1 In addition, skipping a file
@c (with emms-skip) automatically score the file down.

@c With scoring on (this mean the variable @var{emms-use-scoring} is t), emms
@c will compare the score of the file with your tolerance to decide if it
@c is played or not.

@c The default tolerance level is 0 (or the variable
@c @var{emms-score-min-score}).  This mean files with a score of 0 or more will
@c be played and files with a score of -1 or less will be skipped.

@c You can change the tolerance (by 1) with
@c @command{emms-score-lower-tolerance} and @command{emms-score-be-more-tolerant}.

@c @table @code
@c @findex emms-score
@c @item emms-score
@c Activate scoring
@c @findex emms-score-change-mood
@c @item emms-score-change-mood
@c Change current mood
@c @findex emms-score-up-current
@c @item emms-score-up-current
@c Score up the current track
@c @findex emms-score-down-current
@c @item emms-score-down-current
@c Score down the current track
@c @findex emms-score-up-file-on-line
@c @item emms-score-up-file-on-line
@c Score up file on line
@c @findex emms-score-down-file-on-line
@c @item emms-score-down-file-on-line
@c Score down file on line
@c @findex emms-score-be-more-tolerant
@c @item emms-score-be-more-tolerant
@c Lower minimum score
@c @findex emms-score-lower-tolerance
@c @item emms-score-lower-tolerance
@c Raise minimum score
@c @end table

@node Extending Emms
@chapter Extending Emms

@cindex new players
@cindex defining players
@cindex new players, defining

Emms introduces a high abstraction layer for playing music so you can
customise a lot of things to morph Emms into @emph{your} media player.
@c FIXME: Compress this into a smaller footprint, no need for so many
@c submenus.
@menu
* New Player::  How to define a new player
@end menu

@node New Player
@section New Player

The file @file{emms-player-simple.el} defines some easy players to
start with, but it shouldn't be hard to provide a function for your
favourite player. We will start with an easy example that shows how
we can use the @command{play} command under Unix to play our WAV files.

@menu
* Simple Player for @command{play}:: An example player using @command{play}
* More Complex Player:: Example of a complex player using @command{mpg321}
@end menu

@node Simple Player for @command{play}
@subsection Simple Player for @command{play}

Play is a very easy command line player for various format. If you
want your emms to play WAV files just put the following lines in you
@file{.emacs}:

@lisp
(require 'emms-player-simple)
(define-emms-simple-player play '(file) "\\.wav$" "play")
@end lisp
@noindent

Huh! Wasn't that easy?

The macro function @command{define-emms-simple-player} takes a minimum
of three arguments. The first argument (@emph{play} in our example)
defines the name of the player. It's used to name the player
functions. The second is a regexp, that defines which files to play
with our player. @emph{\\.wav$} matches any filename ending with a dot
and the string wav. The last argument is the actual command line
command we use to play our files. You can also add the path but we
just assume that the command is in your path. All arguments you add to
these three are optional. They define the command line arguments you
want to add to your argument. If you want to hear the wav file of
your favourite artist in the most possible volume use the following
line:

@lisp
(require 'emms-player-simple)
(define-emms-simple-player play '(file) "\\artist-*.wav$" "play" "--volume=100")
@end lisp
@noindent

Please notice that you have to add the arguments as strings!

The command line tool you use for @command{define-emms-simple-player}
has to take one song as argument and stop after playing that
particular song. For any other concept you will need to customise
emms a bit more...

@node More Complex Player
@subsection More Complex Player

The most players you use will be simple players so you don't need to
read this chapter. But if you are curious how you can use (almost) every
player in emms read further...

In this chapter we will use mpg321 to construct a player that
actually can pause a track, restart it and show rest time. We won't
implement all of that, but after that chapter you will know how to
define it.

The command @command{define-emms-simple-player} is just a abstraction
layer for @command{define-emms-player}, which is a little bit more
complicated but much more powerful!

@lisp
(define-emms-player "emms-mpg321-remote"
  :start 'emms-mpg321-remote-start
  :stop 'emms-mpg321-remote-stop
  :playablep 'emms-mpg321-remote-playable-p)
@end lisp
@noindent

So, that almost all! @command{define-emms-player} takes a minimum of
three arguments. The first is the name of the player. The rest are
methods with functions to call. Three methods are required: start,
stop and playable. Start says Emms how to start a track (sic!), stop
how to stop a player and playablep should return non-nil if the
player can play the track.

So we just need these three functions to get our mpg321-remote:

First we code the start function. We will check if there's a open
process and start one otherwise. Then we send a string to the process
with the filename and set a filter.

@lisp
(defun emms-mpg321-remote-start ()
  (unless (get-process "mpg321-remote")
    (setq emms-mpg321-remote-process
	  (start-process "mpg321-remote-process"
			 "*mpg321*" "mpg321" "-R" "abc"))
  (process-send-string "mpg321-remote-process"
		       (concat "l " (emms-track-name track)))
  (set-process-filter emms-mpg321-remote-process 'emms-mpg321-remote-filter)))
@end lisp
@noindent

We need the filter, as mpg321-remote won't quit after playing the
track as the simple player do. We wait until the process send the
output ``@@P 0'' (the signal of mpg321 that the song ended) to the
filter and call emms-mpg321-remote-stop.

@lisp
(defun emms-mpg321-remote-filter (process output)
  (when (string-match "@@P 0" output)
    (emms-mpg321-remote-stop)))
@end lisp
@noindent

@command{emms-mpg321-remote-stop} won't do anything interesting. It
just test if there are other files to play and close the process otherwise.

@lisp
(defun emms-mpg321-remote-stop ()
  (unless emms-playlist
    (process-send-string "mpg321-remote-process" "Q\n"))
@end lisp
@noindent

And to make that a playable example i also added
@command{emms-mpg321-remote-playablep}, which i just really steal
from @file{emms-player-simple.el}

@lisp
(defun emms-mpg321-remote-playablep (track)
       "Return non-nil when we can play this track."
       (and (eq 'file (emms-track-type track))
@end lisp
@noindent

Now we have a ready player and we could add commands like
@command{emms-mpg321-remote-pause} for example.

@node Streaming Audio
@chapter Streaming Audio

@cindex streaming audio
@cindex internet radio

Emms provides a friendly interface for managing and playing streaming
audio in addition to the Emms playlist interface. The interface is
defined in the @file{emms-streams.el} package and can be loaded by
invoking:

@lisp
(require 'emms-streams)
@end lisp

Enter the emms-streams interface by invoking M-x
@command{emms-streams}. The emms-streams interface comes with a
built-in, eclectic list of streaming audio channels from thoughout the
Web. Emms can of-course play other streams than the ones listed by
default, you are free to remove any or all of them and add your
own.@footnote{If you enjoy a particular streaming audio station on the
Web and think that it belongs in the default list, please send us a
link and we will gladly add it!}

The following is a list of the key-bindings for the emms-streams
interface:

@table @kbd
@item RET
@kindex RET (emms-streams)
@vindex emms-stream-default-action
Perform the default action when you press RET in the Emms Stream
interface. Can be either ``add'' or ``play''. The default is ``add'',
which adds the station under point to the Emms playlist. When
@var{emms-stream-default-action} is ``play'' then Emms will play the
streaming audio channel under point.
@item q
@kindex q (emms-streams)
@findex emms-stream-quit
Quit the emms-streams interface.
@item a
@kindex a (emms-streams)
@findex emms-stream-add-bookmark
Add a bookmark to a streaming audio URL to the list.
@item d
@kindex d (emms-streams)
@findex emms-stream-delete-bookmark
Remove a bookmark to a streaming audio URL from the list.
@item e
@kindex e (emms-streams)
@findex emms-stream-edit-bookmark
Edit the details of the bookmark under point.
@item h
@kindex h (emms-streams)
@findex describe-mode
Describe the emms-streams mode.
@item n
@kindex n (emms-streams)
@findex emms-stream-next-line
Move to the next line in the emms-streams buffer (same as C-n).
@item p
@kindex p (emms-streams)
@findex emms-stream-previous-line
Move to the previous line in the emms-streams buffer (same as C-p).
@item s
@kindex s (emms-streams)
@findex emms-stream-save-bookmarks-file
Save the bookmarks in the emms-streams interface to disk. The
bookmarks will be to the location designated in the variable
@var{emms-stream-bookmarks-file}.
@item i
@kindex i (emms-streams)
@findex emms-stream-info-bookmark
Return information about the streaming audio at the URL of the
bookmark under point. Note that this will only work if the
`emms-stream-info' has already been loaded.
@end table

@node Concept Index
@unnumbered Concept Index
@printindex cp

@node Function Index
@unnumbered Function Index
@printindex fn

@node Variable Index
@unnumbered Variable Index
@printindex vr

@node Keybinding Index
@unnumbered Keybinding Index
@printindex ky

@bye