Documentation and Markup ======================== Haddock understands special documentation annotations in the Haskell source file and propagates these into the generated documentation. The annotations are purely optional: if there are no annotations, Haddock will just generate documentation that contains the type signatures, data type declarations, and class declarations exported by each of the modules being processed. Documenting a Top-Level Declaration ----------------------------------- The simplest example of a documentation annotation is for documenting any top-level declaration (function type signature, type declaration, or class declaration). For example, if the source file contains the following type signature: :: square :: Int -> Int square x = x * x Then we can document it like this: :: -- |The 'square' function squares an integer. square :: Int -> Int square x = x * x The ``-- |`` syntax begins a documentation annotation, which applies to the *following* declaration in the source file. Note that the annotation is just a comment in Haskell — it will be ignored by the Haskell compiler. The declaration following a documentation annotation should be one of the following: - A type signature for a top-level function, - A definition for a top-level function with no type signature, - A ``data`` declaration, - A ``newtype`` declaration, - A ``type`` declaration - A ``class`` declaration, - A ``data family`` or ``type family`` declaration, or - A ``data instance`` or ``type instance`` declaration. If the annotation is followed by a different kind of declaration, it will probably be ignored by Haddock. Some people like to write their documentation *after* the declaration; this is possible in Haddock too: :: square :: Int -> Int -- ^The 'square' function squares an integer. square x = x * x Since Haddock uses the GHC API internally, it can infer types for top-level functions without type signatures. However, you're encouraged to add explicit type signatures for all top-level functions, to make your source code more readable for your users, and at times to avoid GHC inferring overly general type signatures that are less helpful to your users. Documentation annotations may span several lines; the annotation continues until the first non-comment line in the source file. For example: :: -- |The 'square' function squares an integer. -- It takes one argument, of type 'Int'. square :: Int -> Int square x = x * x You can also use Haskell's nested-comment style for documentation annotations, which is sometimes more convenient when using multi-line comments: :: {-| The 'square' function squares an integer. It takes one argument, of type 'Int'. -} square :: Int -> Int square x = x * x Documenting Parts of a Declaration ---------------------------------- In addition to documenting the whole declaration, in some cases we can also document individual parts of the declaration. Class Methods ~~~~~~~~~~~~~ Class methods are documented in the same way as top level type signatures, by using either the ``-- |`` or ``-- ^`` annotations: :: class C a where -- | This is the documentation for the 'f' method f :: a -> Int -- | This is the documentation for the 'g' method g :: Int -> a Constructors and Record Fields ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Constructors are documented like so: :: data T a b -- | This is the documentation for the 'C1' constructor = C1 a b -- | This is the documentation for the 'C2' constructor | C2 a b or like this: :: data T a b = C1 a b -- ^ This is the documentation for the 'C1' constructor | C2 a b -- ^ This is the documentation for the 'C2' constructor Record fields are documented using one of these styles: :: data R a b = C { -- | This is the documentation for the 'a' field a :: a, -- | This is the documentation for the 'b' field b :: b } data R a b = C { a :: a -- ^ This is the documentation for the 'a' field , b :: b -- ^ This is the documentation for the 'b' field } Alternative layout styles are generally accepted by Haddock - for example doc comments can appear before or after the comma in separated lists such as the list of record fields above. In case that more than one constructor exports a field with the same name, the documentation attached to the first occurence of the field will be used, even if a comment is not present. :: data T a = A { someField :: a -- ^ Doc for someField of A } | B { someField :: a -- ^ Doc for someField of B } In the above example, all occurences of ``someField`` in the documentation are going to be documented with ``Doc for someField of A``. Note that Haddock versions 2.14.0 and before would join up documentation of each field and render the result. The reason for this seemingly weird behaviour is the fact that ``someField`` is actually the same (partial) function. Function Arguments ~~~~~~~~~~~~~~~~~~ Individual arguments to a function may be documented like this: :: f :: Int -- ^ The 'Int' argument -> Float -- ^ The 'Float' argument -> IO () -- ^ The return value .. _module-description: The Module Description ---------------------- A module itself may be documented with multiple fields that can then be displayed by the backend. In particular, the HTML backend displays all the fields it currently knows about. We first show the most complete module documentation example and then talk about the fields. :: {-| Module : W Description : Short description Copyright : (c) Some Guy, 2013 Someone Else, 2014 License : GPL-3 Maintainer : sample@email.com Stability : experimental Portability : POSIX Here is a longer description of this module, containing some commentary with @some markup@. -} module W where ... All fields are optional but they must be in order if they do appear. Multi-line fields are accepted but the consecutive lines have to start indented more than their label. If your label is indented one space as is often the case with the ``--`` syntax, the consecutive lines have to start at two spaces at the very least. For example, above we saw a multiline ``Copyright`` field: :: {-| ... Copyright : (c) Some Guy, 2013 Someone Else, 2014 ... -} That could equivalently be written as :: -- | ... -- Copyright: -- (c) Some Guy, 2013 -- Someone Else, 2014 -- ... or as :: -- | ... -- Copyright: (c) Some Guy, 2013 -- Someone Else, 2014 -- ... but not as :: -- | ... -- Copyright: (c) Some Guy, 2013 -- Someone Else, 2014 -- ... since the ``Someone`` needs to be indented more than the ``Copyright``. Whether new lines and other formatting in multiline fields is preserved depends on the field type. For example, new lines in the ``Copyright`` field are preserved, but new lines in the ``Description`` field are not; leading whitespace is not preserved in either [#backend]_. Please note that we do not enforce the format for any of the fields and the established formats are just a convention. .. [#backend] Technically, whitespace and newlines in the ``Description`` field are preserved verbatim by the HTML backend, but because most browsers collapse whitespace in HTML, they don't render as such. But other backends may render this whitespace. Fields of the Module Description ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The ``Module`` field specifies the current module name. Since the module name can be inferred automatically from the source file, it doesn't affect the output of any of the backends. But you might want to include it for any other tools that might be parsing these comments without the help of GHC. The ``Description`` field accepts some short text which outlines the general purpose of the module. If you're generating HTML, it will show up next to the module link in the module index. The ``Copyright``, ``License``, ``Maintainer`` and ``Stability`` fields should be obvious. An alternative spelling for the ``License`` field is accepted as ``Licence`` but the output will always prefer ``License``. The ``Portability`` field has seen varied use by different library authors. Some people put down things like operating system constraints there while others put down which GHC extensions are used in the module. Note that you might want to consider using the ``show-extensions`` module flag for the latter (see :ref:`module-attrs`). Finally, a module may contain a documentation comment before the module header, in which case this comment is interpreted by Haddock as an overall description of the module itself, and placed in a section entitled ``Description`` in the documentation for the module. All the usual Haddock :ref:`markup` is valid in this comment. Controlling the Documentation Structure --------------------------------------- Haddock produces interface documentation that lists only the entities actually exported by the module. If there is no export list then all entities defined by the module are exported. The documentation for a module will include *all* entities exported by that module, even if they were re-exported from another module. The only exception is when Haddock can't see the declaration for the re-exported entity, perhaps because it isn't part of the batch of modules currently being processed. To Haddock the export list has even more significance than just specifying the entities to be included in the documentation. It also specifies the *order* that entities will be listed in the generated documentation. This leaves the programmer free to implement functions in any order he/she pleases, and indeed in any *module* he/she pleases, but still specify the order that the functions should be documented in the export list. Indeed, many programmers already do this: the export list is often used as a kind of ad-hoc interface documentation, with headings, groups of functions, type signatures and declarations in comments. In the next section we give examples illustrating most of the structural markup features. After the examples we go into more detail explaining the related markup, namely :ref:`section-headings`, :ref:`named-chunks`, and :ref:`re-exporting-entire-module`. .. _structure-examples: Documentation Structure Examples ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We now give several examples that produce similar results and illustrate most of the structural markup features. The first two example use an export list, but the third example does not. The first example, using an export list with :ref:`section-headings` and inline section descriptions: :: module Image ( -- * Image importers -- -- | There is a "smart" importer, 'readImage', that determines -- the image format from the file extension, and several -- "dumb" format-specific importers that decode the file at -- the specified type. readImage , readPngImage , readGifImage , ... -- * Image exporters -- ... ) where import Image.Types ( Image ) -- | Read an image, guessing the format from the file name. readImage :: FilePath -> IO Image readImage = ... -- | Read a GIF. readGifImage :: FilePath -> IO Image readGifImage = ... -- | Read a PNG. readPngImage :: FilePath -> IO Image readPngImage = ... ... Note that the order of the entities ``readPngImage`` and ``readGifImage`` in the export list is different from the order of the actual declarations farther down; the order in the export list is the order used in the generated docs. Also, the imported ``Image`` type itself is not re-exported, so it will not be included in the rendered docs (see :ref:`hyperlinking-re-exported`). The second example, using an export list with a section description defined elsewhere (the ``$imageImporters``; see :ref:`named-chunks`): :: module Image ( -- * Image importers -- -- $imageImporters readImage , readPngImage , readGifImage , ... -- * Image exporters -- ... ) where import Image.Types ( Image ) -- $imageImporters -- -- There is a "smart" importer, 'readImage', that determines the -- image format from the file extension, and several "dumb" -- format-specific importers that decode the file at the specified -- type. -- | Read an image, guessing the format from the file name. readImage :: FilePath -> IO Image readImage = ... -- | Read a GIF. readGifImage :: FilePath -> IO Image readGifImage = ... -- | Read a PNG. readPngImage :: FilePath -> IO Image readPngImage = ... ... This produces the same rendered docs as the first example, but the source code itself is arguably more readable, since the documentation for the group of importer functions is closer to their definitions. The third example, without an export list: :: module Image where import Image.Types ( Image ) -- * Image importers -- -- $imageImporters -- -- There is a "smart" importer, 'readImage', that determines the -- image format from the file extension, and several "dumb" -- format-specific importers that decode the file at the specified -- type. -- | Read an image, guessing the format from the file name. readImage :: FilePath -> IO Image readImage = ... -- | Read a GIF. readGifImage :: FilePath -> IO Image readGifImage = ... -- | Read a PNG. readPngImage :: FilePath -> IO Image readPngImage = ... ... -- * Image exporters -- ... Note that the section headers (e.g. ``-- * Image importers``) now appear in the module body itself, and that the section documentation is still given using :ref:`named-chunks`. Unlike in the first example when using an export list, the named chunk syntax ``$imageImporters`` *must* be used for the section documentation; attempting to use the ``-- | ...`` syntax to document the image importers here will wrongly associate the documentation chunk with the next definition! .. _section-headings: Section Headings ~~~~~~~~~~~~~~~~ You can insert headings and sub-headings in the documentation by including annotations at the appropriate point in the export list, or in the module body directly when not using an export list. For example: :: module Foo ( -- * Classes C(..), -- * Types -- ** A data type T, -- ** A record R, -- * Some functions f, g ) where Headings are introduced with the syntax ``-- *``, ``-- **`` and so on, where the number of ``*``\ s indicates the level of the heading (section, sub-section, sub-sub-section, etc.). If you use section headings, then Haddock will generate a table of contents at the top of the module documentation for you. The alternative style of placing the commas at the beginning of each line is also supported. e.g.: :: module Foo ( -- * Classes , C(..) -- * Types -- ** A data type , T -- ** A record , R -- * Some functions , f , g ) where When not using an export list, you may insert section headers in the module body. Such section headers associate with all entities declaried up until the next section header. For example: :: module Foo where -- * Classes class C a where ... -- * Types -- ** A data type data T = ... -- ** A record data R = ... -- * Some functions f :: ... f = ... g :: ... g = ... .. _re-exporting-entire-module: Re-Exporting an Entire Module ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Haskell allows you to re-export the entire contents of a module (or at least, everything currently in scope that was imported from a given module) by listing it in the export list: :: module A ( module B, module C ) where What will the Haddock-generated documentation for this module look like? Well, it depends on how the modules ``B`` and ``C`` are imported. If they are imported wholly and without any ``hiding`` qualifiers, then the documentation will just contain a cross-reference to the documentation for ``B`` and ``C``. However, if the modules are not *completely* re-exported, for example: :: module A ( module B, module C ) where import B hiding (f) import C (a, b) then Haddock behaves as if the set of entities re-exported from ``B`` and ``C`` had been listed explicitly in the export list [#notImplemented]_. .. Comment: was this ever implemented? Perhaps this part of the docs should just be removed until it is implemented? .. [#notImplemented] This is not implemented at the time of writing (Haddock version 2.17.3 with GHC 8.0.2). At the moment, Haddock always inserts a module cross-reference. The exception to this rule is when the re-exported module is declared with the ``hide`` attribute (see :ref:`module-attrs`), in which case the module is never cross-referenced; the contents are always expanded in place in the re-exporting module. .. _named-chunks: (Named) Chunks of Documentation ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ It is often desirable to include a chunk of documentation which is not attached to any particular Haskell declaration, for example, when giving summary documentation for a group of related definitions (see :ref:`structure-examples`). In addition to including such documenation chunks at the top of the file, as part of the :ref:`module-description`, you can also associate them with :ref:`section-headings`. There are several ways to associate documentation chunks with section headings, depending on whether you are using an export list or not: - The documentation can be included in the export list directly, by preceding it with a ``-- |``. For example: :: module Foo ( -- * A section heading -- | Some documentation not attached to a particular Haskell entity ... ) where In this case the chunk is not "named". - If the documentation is large and placing it inline in the export list might bloat the export list and obscure the structure, then it can be given a name and placed out of line in the body of the module. This is achieved with a special form of documentation annotation ``-- $``, which we call a *named chunk*: :: module Foo ( -- * A section heading -- $doc ... ) where -- $doc -- Here is a large chunk of documentation which may be referred to by -- the name $doc. The documentation chunk is given a name of your choice (here ``doc``), which is the sequence of alphanumeric characters directly after the ``-- $``, and it may be referred to by the same name in the export list. Note that named chunks must come *after* any imports in the module body. - If you aren't using an export list, then your only choice is to use a named chunk with the ``-- $`` syntax. For example: :: module Foo where -- * A section heading -- -- $doc -- Here is a large chunk of documentation which may be referred to by -- the name $doc. Just like with entity declariations when not using an export list, named chunks of documentation are associated with the preceding section header here, or with the implicit top-level documentation section if there is no preceding section header. **Warning**: the form used in the first bullet above, where the chunk is not named, *does not work* when you aren't using an export list. For example :: module Foo where -- * A section heading -- -- | Some documentation not attached to a particular Haskell entity -- | The fooifier. foo :: ... will result in ``Some documentation not ...`` being attached to *next* entity declaration, here ``foo``, in addition to any other documentation that next entity already has! .. _hyperlinking-re-exported: Hyperlinking and Re-Exported Entities ------------------------------------- When Haddock renders a type in the generated documentation, it hyperlinks all the type constructors and class names in that type to their respective definitions. But for a given type constructor or class there may be several modules re-exporting it, and therefore several modules whose documentation contains the definition of that type or class (possibly including the current module!) so which one do we link to? Let's look at an example. Suppose we have three modules ``A``, ``B`` and ``C`` defined as follows: :: module A (T) where data T a = C a module B (f) where import A f :: T Int -> Int f (C i) = i module C (T, f) where import A import B Module ``A`` exports a datatype ``T``. Module ``B`` imports ``A`` and exports a function ``f`` whose type refers to ``T``. Also, both ``T`` and ``f`` are re-exported from module C. Haddock takes the view that each entity has a *home* module; that is, the module that the library designer would most like to direct the user to, to find the documentation for that entity. So, Haddock makes all links to an entity point to the home module. The one exception is when the entity is also exported by the current module: Haddock makes a local link if it can. How is the home module for an entity determined? Haddock uses the following rules: - If modules A and B both export the entity, and module A imports (directly or indirectly) module B, then B is preferred. - A module with the ``hide`` attribute is never chosen as the home. - A module with the ``not-home`` attribute is only chosen if there are no other modules to choose. If multiple modules fit the criteria, then one is chosen at random. If no modules fit the criteria (because the candidates are all hidden), then Haddock will issue a warning for each reference to an entity without a home. In the example above, module ``A`` is chosen as the home for ``T`` because it does not import any other module that exports ``T``. The link from ``f``'s type in module ``B`` will therefore point to ``A.T``. However, ``C`` also exports ``T`` and ``f``, and the link from ``f``'s type in ``C`` will therefore point locally to ``C.T``. .. _module-attrs: Module Attributes ----------------- Certain attributes may be specified for each module which affects the way that Haddock generates documentation for that module. Attributes are specified in a comma-separated list in an ``{-# OPTIONS_HADDOCK ... #-}`` pragma at the top of the module, either before or after the module description. For example: :: {-# OPTIONS_HADDOCK hide, prune, ignore-exports #-} -- |Module description module A where ... The options and module description can be in either order. The following attributes are currently understood by Haddock: ``hide`` Omit this module from the generated documentation, but nevertheless propagate definitions and documentation from within this module to modules that re-export those definitions. ``prune`` Omit definitions that have no documentation annotations from the generated documentation. ``ignore-exports`` Ignore the export list. Generate documentation as if the module had no export list - i.e. all the top-level declarations are exported, and section headings may be given in the body of the module. ``not-home`` Indicates that the current module should not be considered to be the home module for each entity it exports, unless that entity is not exported from any other module. See :ref:`hyperlinking-re-exported` for more details. ``show-extensions`` Indicates that we should render the extensions used in this module in the resulting documentation. This will only render if the output format supports it. If Language is set, it will be shown as well and all the extensions implied by it won't. All enabled extensions will be rendered, including those implied by their more powerful versions. .. _markup: Markup ------ Haddock understands certain textual cues inside documentation annotations that tell it how to render the documentation. The cues (or “markup”) have been designed to be simple and mnemonic in ASCII so that the programmer doesn't have to deal with heavyweight annotations when editing documentation comments. Paragraphs ~~~~~~~~~~ One or more blank lines separates two paragraphs in a documentation comment. Special Characters ~~~~~~~~~~~~~~~~~~ The following characters have special meanings in documentation comments: ``\\``, ``/``, ``'``, ``\```, ``"``, ``@``, ``<``, ``$``, ``#``. To insert a literal occurrence of one of these special characters, precede it with a backslash (``\\``). Additionally, the character ``>`` has a special meaning at the beginning of a line, and the following characters have special meanings at the beginning of a paragraph: ``*``, ``-``. These characters can also be escaped using ``\\``. Furthermore, the character sequence ``>>>`` has a special meaning at the beginning of a line. To escape it, just prefix the characters in the sequence with a backslash. Character References ~~~~~~~~~~~~~~~~~~~~ Although Haskell source files may contain any character from the Unicode character set, the encoding of these characters as bytes varies between systems, so that only source files restricted to the ASCII character set are portable. Other characters may be specified in character and string literals using Haskell character escapes. To represent such characters in documentation comments, Haddock supports SGML-style numeric character references of the forms ``&#``\ D\ ``;`` and ``&#x``\ H\ ``;`` where D and H are decimal and hexadecimal numbers denoting a code position in Unicode (or ISO 10646). For example, the references ``λ``, ``λ`` and ``λ`` all represent the lower-case letter lambda. Code Blocks ~~~~~~~~~~~ Displayed blocks of code are indicated by surrounding a paragraph with ``@...@`` or by preceding each line of a paragraph with ``>`` (we often call these “bird tracks”). For example: :: -- | This documentation includes two blocks of code: -- -- @ -- f x = x + x -- @ -- -- > g x = x * 42 There is an important difference between the two forms of code block: in the bird-track form, the text to the right of the ‘\ ``>``\ ’ is interpreted literally, whereas the ``@...@`` form interprets markup as normal inside the code block. In particular, ``/`` is markup for italics, and so e.g. ``@x / y / z@`` renders as ``x`` followed by italic ``y`` with no slashes, followed by ``z``. Examples ~~~~~~~~ Haddock has markup support for examples of interaction with a *read-eval-print loop (REPL)*. An example is introduced with ``>>>`` followed by an expression followed by zero or more result lines: :: -- | Two examples are given below: -- -- >>> fib 10 -- 55 -- -- >>> putStrLn "foo\nbar" -- foo -- bar Result lines that only contain the string ```` are rendered as blank lines in the generated documentation. Properties ~~~~~~~~~~ Haddock provides markup for properties: :: -- | Addition is commutative: -- -- prop> a + b = b + a This allows third-party applications to extract and verify them. Hyperlinked Identifiers ~~~~~~~~~~~~~~~~~~~~~~~ Referring to a Haskell identifier, whether it be a type, class, constructor, or function, is done by surrounding it with a combination of single quotes and backticks. For example: :: -- | This module defines the type 'T'. ```T``` is also ok. ``'T``` and ```T'`` are accepted but less common. If there is an entity ``T`` in scope in the current module, then the documentation will hyperlink the reference in the text to the definition of ``T`` (if the output format supports hyperlinking, of course; in a printed format it might instead insert a page reference to the definition). It is also possible to refer to entities that are not in scope in the current module, by giving the full qualified name of the entity: :: -- | The identifier 'M.T' is not in scope If ``M.T`` is not otherwise in scope, then Haddock will simply emit a link pointing to the entity ``T`` exported from module ``M`` (without checking to see whether either ``M`` or ``M.T`` exist). To make life easier for documentation writers, a quoted identifier is only interpreted as such if the quotes surround a lexically valid Haskell identifier. This means, for example, that it normally isn't necessary to escape the single quote when used as an apostrophe: :: -- | I don't have to escape my apostrophes; great, isn't it? Nothing special is needed to hyperlink identifiers which contain apostrophes themselves: to hyperlink ``foo'`` one would simply type ``'foo''``. To hyperlink identifiers written in infix form, simply put them in quotes as always: ``'`elem`'``. Emphasis, Bold and Monospaced Text ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Emphasis may be added by surrounding text with ``/.../``. Other markup is valid inside emphasis. To have a forward slash inside of emphasis, just escape it: ``/fo\/o/`` Bold (strong) text is indicated by surrounding it with ``__...__``. Other markup is valid inside bold. For example, ``__/foo/__`` will make the emphasised text ``foo`` bold. You don't have to escape a single underscore if you need it bold: ``__This_text_with_underscores_is_bold__``. Monospaced (or typewriter) text is indicated by surrounding it with ``@...@``. Other markup is valid inside a monospaced span: for example ``@'f' a b@`` will hyperlink the identifier ``f`` inside the code fragment, but ``@__FILE__@`` will render ``FILE`` in bold with no underscores, which may not be what you had in mind. Linking to Modules ~~~~~~~~~~~~~~~~~~ Linking to a module is done by surrounding the module name with double quotes: :: -- | This is a reference to the "Foo" module. A basic check is done on the syntax of the header name to ensure that it is valid before turning it into a link but unlike with identifiers, whether the module is in scope isn't checked and will always be turned into a link. Itemized and Enumerated Lists ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A bulleted item is represented by preceding a paragraph with either “``*``” or “``-``”. A sequence of bulleted paragraphs is rendered as an itemized list in the generated documentation, eg.: :: -- | This is a bulleted list: -- -- * first item -- -- * second item An enumerated list is similar, except each paragraph must be preceded by either “``(n)``” or “``n.``” where n is any integer. e.g. :: -- | This is an enumerated list: -- -- (1) first item -- -- 2. second item Lists of the same type don't have to be separated by a newline: :: -- | This is an enumerated list: -- -- (1) first item -- 2. second item -- -- This is a bulleted list: -- -- * first item -- * second item You can have more than one line of content in a list element: :: -- | -- * first item -- and more content for the first item -- * second item -- and more content for the second item You can even nest whole paragraphs inside of list elements. The rules are 4 spaces for each indentation level. You're required to use a newline before such nested paragraph: :: {-| * Beginning of list This belongs to the list above! > nested > bird > tracks * Next list More of the indented list. * Deeper @ even code blocks work @ * Deeper 1. Even deeper! 2. No newline separation even in indented lists. -} The indentation of the first list item is honoured. That is, in the following example the items are on the same level. Before Haddock 2.16.1, the second item would have been nested under the first item which was unexpected. :: {-| * foo * bar -} Definition Lists ~~~~~~~~~~~~~~~~ Definition lists are written as follows: :: -- | This is a definition list: -- -- [@foo@]: The description of @foo@. -- -- [@bar@]: The description of @bar@. To produce output something like this: ``foo`` The description of ``foo``. ``bar`` The description of ``bar``. Each paragraph should be preceded by the “definition term” enclosed in square brackets and followed by a colon. Other markup operators may be used freely within the definition term. You can escape ``]`` with a backslash as usual. Same rules about nesting and no newline separation as for bulleted and numbered lists apply. URLs ~~~~ A URL can be included in a documentation comment by surrounding it in angle brackets, for example: :: If the output format supports it, the URL will be turned into a hyperlink when rendered. If Haddock sees something that looks like a URL (such as something starting with ``http://`` or ``ssh://``) where the URL markup is valid, it will automatically make it a hyperlink. Links ~~~~~ Haddock supports Markdown syntax for inline links. A link consists of a link text and a URL. The link text is enclosed in square brackets and followed by the URL enclosed in regular parentheses, for example: :: [some link](http://example.com) The link text is used as a descriptive text for the URL, if the output format supports it. Images ~~~~~~ Haddock supports Markdown syntax for inline images. This resembles the syntax for links, but starts with an exclamation mark. An example looks like this: :: ![image description](pathtoimage.png) If the output format supports it, the image will be rendered inside the documentation. The image description is used as relpacement text and/or image title. Mathematics / LaTeX ~~~~~~~~~~~~~~~~~~~ Haddock supports LaTeX syntax for rendering mathematical notation. The delimiters are ``\[...\]`` for displayed mathematics and ``\(...\)`` for in-line mathematics. An example looks like this: :: \[ f(a) = \frac{1}{2\pi i}\oint_\gamma \frac{f(z)}{z-a}\,\mathrm{d}z \] If the output format supports it, the mathematics will be rendered inside the documentation. For example, the HTML backend will display the mathematics via `MathJax `__. Grid Tables ~~~~~~~~~~~ Inspired by reSTs grid tables Haddock supports a complete table representation via a grid-like "ASCII art". Grid tables are described with a visual grid made up of the characters "-", "=", "|", and "+". The hyphen ("-") is used for horizontal lines (row separators). The equals sign ("=") may be used to separate optional header rows from the table body. The vertical bar ("|") is used for vertical lines (column separators). The plus sign ("+") is used for intersections of horizontal and vertical lines. :: -- | This is a grid table: -- -- +------------------------+------------+----------+----------+ -- | Header row, column 1 | Header 2 | Header 3 | Header 4 | -- | (header rows optional) | | | | -- +========================+============+==========+==========+ -- | body row 1, column 1 | column 2 | column 3 | column 4 | -- +------------------------+------------+----------+----------+ -- | body row 2 | Cells may span columns. | -- +------------------------+------------+---------------------+ -- | body row 3 | Cells may | \[ | -- +------------------------+ span rows. | f(n) = \sum_{i=1} | -- | body row 4 | | \] | -- +------------------------+------------+---------------------+ Anchors ~~~~~~~ Sometimes it is useful to be able to link to a point in the documentation which doesn't correspond to a particular entity. For that purpose, we allow *anchors* to be included in a documentation comment. The syntax is ``#label#``, where label is the name of the anchor. An anchor is invisible in the generated documentation. To link to an anchor from elsewhere, use the syntax ``"module#label"`` where module is the module name containing the anchor, and label is the anchor label. The module does not have to be local, it can be imported via an interface. Please note that in Haddock versions 2.13.x and earlier, the syntax was ``"module\#label"``. It is considered deprecated and will be removed in the future. Headings ~~~~~~~~ Headings inside of comment documentation are possible by preceding them with a number of ``=``\ s. From 1 to 6 are accepted. Extra ``=``\ s will be treated as belonging to the text of the heading. Note that it's up to the output format to decide how to render the different levels. :: -- | -- = Heading level 1 with some /emphasis/ -- Something underneath the heading. -- -- == /Subheading/ -- More content. -- -- === Subsubheading -- Even more content. Note that while headings have to start on a new paragraph, we allow paragraph-level content to follow these immediately. :: -- | -- = Heading level 1 with some __bold__ -- Something underneath the heading. -- -- == /Subheading/ -- More content. -- -- === Subsubheading -- >>> examples are only allowed at the start of paragraphs As of 2.15.1, there's experimental (read: subject to change or get removed) support for collapsible headers: simply wrap your existing header title in underscores, as per bold syntax. The collapsible section will stretch until the end of the comment or until a header of equal or smaller number of ``=``\ s. :: -- | -- === __Examples:__ -- >>> Some very long list of examples -- -- ==== This still falls under the collapse -- Some specialised examples -- -- === This is does not go into the collapsable section. -- More content. Metadata ~~~~~~~~ Since Haddock 2.16.0, some support for embedding metadata in the comments has started to appear. The use of such data aims to standardise various community conventions in how such information is conveyed and to provide uniform rendering. Since ^^^^^ ``@since`` annotation can be used to convey information about when the function was introduced or when it has changed in the way significant to the user. ``@since`` is a paragraph-level element. While multiple such annotations are not an error, only the one to appear in the comment last will be used. ``@since`` has to be followed with a version number, no further description is currently allowed. The meaning of this feature is subject to change in the future per user feedback. :: -- | -- Some comment -- -- @since 1.2.3