From 4114f6cc1762573ddf05cf92f2d304dbf04ed04e Mon Sep 17 00:00:00 2001
From: Andrew Harvey <andrew@alantgeo.com.au>
Date: Tue, 4 May 2021 16:12:13 +1000
Subject: major refactor and improvements

---
 toOSM.js | 170 ---------------------------------------------------------------
 1 file changed, 170 deletions(-)
 delete mode 100644 toOSM.js

(limited to 'toOSM.js')

diff --git a/toOSM.js b/toOSM.js
deleted file mode 100644
index dd993d0..0000000
--- a/toOSM.js
+++ /dev/null
@@ -1,170 +0,0 @@
-const { titleCase } = require('title-case')
-const { capitalCase } = require('capital-case')
-
-const buildingUnitType = {
-  ANT: 'ANTENNA',
-  APT: 'APARTMENT',
-  ATM: 'ATM',
-  BBOX: 'BATHING BOX',
-  BERT: 'BERTH',
-  BLDG: 'BUILDING',
-  BTSD: 'BOATSHED',
-  CARP: 'CARPARK',
-  CARS: 'CARSPACE',
-  CARW: 'CARWASH',
-  CHAL: 'CHALET',
-  CLUB: 'CLUB',
-  CTGE: 'COTTAGE',
-  CTYD: 'COURTYARD',
-  DUPL: 'DUPLEX',
-  FCTY: 'FACTORY',
-  FLAT: 'FLAT',
-  GATE: 'GARAGE',
-  GRGE: 'GATE',
-  HALL: 'HALL',
-  HELI: 'HELIPORT',
-  HNGR: 'HANGAR',
-  HOST: 'HOSTEL',
-  HSE: 'HOUSE',
-  KSK: 'KIOSK',
-  LOT: 'LOT',
-  MBTH: 'MAISONETTE',
-  OFFC: 'OFFICE',
-  PSWY: 'PASSAGEWAY',
-  PTHS: 'PENTHOUSE',
-  REST: 'RESTAURANT',
-  RESV: 'RESERVE',
-  ROOM: 'ROOM',
-  RPTN: 'RECPETION',
-  SAPT: 'STUDIO APARTMENT',
-  SE: 'SUITE',
-  SHCS: 'SHOWCASE',
-  SHED: 'SHED',
-  SHOP: 'SHOP',
-  SHRM: 'SHOWROOM',
-  SIGN: 'SIGN',
-  SITE: 'SITE',
-  STLL: 'STALL',
-  STOR: 'STORE',
-  STR: 'STRATA UNIT',
-  STU: 'STUDIO',
-  SUBS: 'SUBSTATION',
-  TNCY: 'TENANCY',
-  TNHS: 'TOWNHOUSE',
-  TWR: 'TOWER',
-  UNIT: 'UNIT',
-  VLLA: 'VILLA',
-  VLT: 'VAULT',
-  WHSE: 'WAREHOUSE',
-  WKSH: 'WORKSHOP'
-}
-
-// likely these are not proper names, so we will ignore them
-const emptyNames = [
-  'UNNAMED',
-  'NOT NAMED'
-]
-
-module.exports = (sourceFeature) => {
-
-  const outputFeature = Object.assign({}, sourceFeature)
-  const sourceProperties = sourceFeature.properties
-  const outputProperties = {}
-
-  // Building sub address type (eg UNIT OFFICE SHOP)
-  //
-  // bld_unit_*
-  const bld_unit_1 = [
-    sourceProperties.BUNIT_PRE1,
-    sourceProperties.BUNIT_ID1 || null, // 0 is used for an empty value in the source data, so convert 0 to null
-    sourceProperties.BUNIT_SUF1
-  ].join('') || null
-
-  const bld_unit_2 = [
-    sourceProperties.BUNIT_PRE2,
-    sourceProperties.BUNIT_ID2 || null, // 0 is used for an empty value in the source data, so convert 0 to null
-    sourceProperties.BUNIT_SUF2
-  ].join('') || null
-
-  // if both 1 and 2 defined, then use a range 1-2 otherwise just select the one which was defined
-  let bld_unit = null
-  if (sourceProperties.HSA_FLAG === 'Y') {
-    bld_unit = sourceProperties.HSAUNITID
-  } else {
-    if (bld_unit_1 && bld_unit_2) {
-      bld_unit = `${bld_unit_1}-${bld_unit_2}`
-    } else if (bld_unit_1) {
-      bld_unit = bld_unit_1
-    } else if (bld_unit_2) {
-      bld_unit = bld_unit_2
-    }
-  }
-
-  if (bld_unit) {
-    outputProperties['addr:unit'] = bld_unit
-  }
-
-  if (sourceProperties.BLGUNTTYP && sourceProperties.BLGUNTTYP in buildingUnitType) {
-    outputProperties['addr:unit:type'] = buildingUnitType[sourceProperties.BLGUNTTYP]
-  }
-
-  if (sourceProperties.BUILDING) {
-    outputProperties['addr:housename'] = sourceProperties.BUILDING
-  }
-
-  // house_*
-  const house_1 = [
-    sourceProperties.HSE_PREF1,
-    sourceProperties.HSE_NUM1 || null, // 0 is used for an empty value in the source data, so convert 0 to null
-    sourceProperties.HSE_SUF1
-  ].join('')
-
-  const house_2 = [
-    sourceProperties.HSE_PREF2,
-    sourceProperties.HSE_NUM2 || null, // 0 is used for an empty value in the source data, so convert 0 to null
-    sourceProperties.HSE_SUF2
-  ].join('')
-
-  let housenumber = null
-  if (house_1 && house_2) {
-    housenumber = `${house_1}-${house_2}`
-  } else if (house_1) {
-    housenumber = house_1
-  } else if (house_2) {
-    housenumber = house_2
-  }
-
-  if (housenumber) {
-    outputProperties['addr:housenumber'] = housenumber
-  }
-
-  // display numbers used predominately in the City of Melbourne CBD by large properties. Primarily to simplify an assigned number range. 
-  // so should map the assigned address or the signposted address?
-
-  // every record has at least ROAD_NAME populated
-  if (sourceProperties.ROAD_NAME && !emptyNames.includes(sourceProperties.ROAD_NAME)) {
-    outputProperties['addr:street'] = capitalCase([
-      sourceProperties.ROAD_NAME,
-      sourceProperties.ROAD_TYPE,
-      sourceProperties.RD_SUF
-    ].join(' '))
-  }
-
-  // every record has LOCALITY populated, however some values should be empty
-  if (sourceProperties.LOCALITY && !emptyNames.includes(sourceProperties.LOCALITY)) {
-    outputProperties['addr:suburb'] = capitalCase(sourceProperties.LOCALITY)
-  }
-
-  // every record has STATE populated
-  if (sourceProperties.STATE) {
-    outputProperties['addr:state'] = sourceProperties.STATE
-  }
-
-  // some records have no POSTCODE populated
-  if (sourceProperties.POSTCODE) {
-    outputProperties['addr:postcode'] = sourceProperties.POSTCODE
-  }
-
-  outputFeature.properties = outputProperties
-  return outputFeature
-}
-- 
cgit v1.2.3