diff options
Diffstat (limited to 'misc-root/etc')
| -rw-r--r-- | misc-root/etc/tlp.conf | 585 |
1 files changed, 585 insertions, 0 deletions
diff --git a/misc-root/etc/tlp.conf b/misc-root/etc/tlp.conf new file mode 100644 index 0000000..f1019a0 --- /dev/null +++ b/misc-root/etc/tlp.conf @@ -0,0 +1,585 @@ +# ------------------------------------------------------------------------------ +# /etc/tlp.conf - TLP user configuration (version 1.6.1) +# See full explanation: https://linrunner.de/tlp/settings +# +# Copyright (c) 2023 Thomas Koch <linrunner at gmx.net> and others. +# SPDX-License-Identifier: GPL-2.0-or-later +# +# Settings are read in the following order: +# +# 1. Intrinsic defaults +# 2. /etc/tlp.d/*.conf - Drop-in customization snippets +# 3. /etc/tlp.conf - User configuration (this file) +# +# Notes: +# - In case of identical parameters, the last occurence has precedence +# - This also means, parameters enabled here will override anything else +# - However you may append values to a parameter already defined as intrinsic +# default or in a previously read file: use PARAMETER+="add values" +# - IMPORTANT: all parameters here are disabled; remove the leading '#' if you +# like to enable a feature without default or have a value different from the +# default +# - Default *: intrinsic default that is effective when the parameter is missing +# or disabled by a leading '#'; use PARAM="" to disable an intrinsic default +# - Default <none>: do nothing or use kernel/hardware defaults +# - IMPORTANT: parameters must always be specified pairwise i.e. for +# both AC and BAT. Omitting one of the two makes the set value effective for +# both power sources, since a change only occurs when different values are +# defined. +# ------------------------------------------------------------------------------ +# tlp - Parameters for power saving + +# Set to 0 to disable, 1 to enable TLP. +# Default: 1 + +#TLP_ENABLE=1 + +# Control how warnings about invalid settings are issued: +# 0=disabled, +# 1=background tasks (boot, resume, change of power source) report to syslog, +# 2=shell commands report to the terminal (stderr), +# 3=combination of 1 and 2 +# Default: 3 + +#TLP_WARN_LEVEL=3 + +# Operation mode when no power supply can be detected: AC, BAT. +# Concerns some desktop and embedded hardware only. +# Default: <none> + +#TLP_DEFAULT_MODE=AC + +# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE +# Note: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC. +# Default: 0 + +#TLP_PERSISTENT_DEFAULT=0 + +# Power supply classes to ignore when determining operation mode: AC, USB, BAT. +# Separate multiple classes with spaces. +# Note: try on laptops where operation mode AC/BAT is incorrectly detected. +# Default: <none> + +#TLP_PS_IGNORE="BAT" + +# Seconds laptop mode has to wait after the disk goes idle before doing a sync. +# Non-zero value enables, zero disables laptop mode. +# Default: 0 (AC), 2 (BAT) + +#DISK_IDLE_SECS_ON_AC=0 +#DISK_IDLE_SECS_ON_BAT=2 + +# Dirty page values (timeouts in secs). +# Default: 15 (AC), 60 (BAT) + +#MAX_LOST_WORK_SECS_ON_AC=15 +#MAX_LOST_WORK_SECS_ON_BAT=60 + +# Select a CPU scaling driver operation mode. +# Intel CPU with intel_pstate driver: +# active, passive. +# AMD Zen 2 or newer CPU with amd-pstate_driver as of kernel 6.3/6.4(*): +# active, passive, guided(*). +# Default: <none> +#CPU_DRIVER_OPMODE_ON_AC=active +#CPU_DRIVER_OPMODE_ON_BAT=active + +# Select a CPU frequency scaling governor. +# Intel CPU with intel_pstate driver or +# AMD CPU with amd-pstate driver in active mode ('amd-pstate-epp'): +# performance, powersave(*). +# Intel CPU with intel_pstate driver in passive mode ('intel_cpufreq') or +# AMD CPU with amd-pstate driver in passive or guided mode ('amd-pstate') or +# Intel, AMD and other CPU brands with acpi-cpufreq driver: +# conservative, ondemand(*), userspace, powersave, performance, schedutil(*). +# Use tlp-stat -p to show the active driver and available governors. +# Important: +# Governors marked (*) above are power efficient for *almost all* workloads +# and therefore kernel and most distributions have chosen them as defaults. +# You should have done your research about advantages/disadvantages *before* +# changing the governor. +# Default: <none> + +#CPU_SCALING_GOVERNOR_ON_AC=powersave +#CPU_SCALING_GOVERNOR_ON_BAT=powersave + +# Set the min/max frequency available for the scaling governor. +# Possible values depend on your CPU. For available frequencies see +# the output of tlp-stat -p. +# Notes: +# - Min/max frequencies must always be specified for both AC *and* BAT +# - Not recommended for use with the intel_pstate driver, use +# CPU_MIN/MAX_PERF_ON_AC/BAT below instead +# Default: <none> + +#CPU_SCALING_MIN_FREQ_ON_AC=0 +#CPU_SCALING_MAX_FREQ_ON_AC=0 +#CPU_SCALING_MIN_FREQ_ON_BAT=0 +#CPU_SCALING_MAX_FREQ_ON_BAT=0 + +# Set CPU energy/performance policies EPP and EPB: +# performance, balance_performance, default, balance_power, power. +# Values are given in order of increasing power saving. +# Requires: +# * Intel CPU +# EPP: Intel Core i 6th gen. or newer CPU with intel_pstate driver +# EPB: Intel Core i 2nd gen. or newer CPU with intel_pstate driver +# as of kernel 5.2; alternatively module msr and +# x86_energy_perf_policy from linux-tools +# EPP and EPB are mutually exclusive: when EPP is available, Intel CPUs +# will not honor EPB. Only the matching feature will be applied by TLP. +# * AMD Zen 2 or newer CPU +# EPP: amd-pstate driver in active mode ('amd-pstate-epp') as of kernel 6.3 +# Default: balance_performance (AC), balance_power (BAT) + +#CPU_ENERGY_PERF_POLICY_ON_AC=balance_performance +#CPU_ENERGY_PERF_POLICY_ON_BAT=balance_power + +# Set Intel CPU P-state performance: 0..100 (%). +# Limit the max/min P-state to control the power dissipation of the CPU. +# Values are stated as a percentage of the available performance. +# Requires Intel Core i 2nd gen. or newer CPU with intel_pstate driver. +# Default: <none> + +#CPU_MIN_PERF_ON_AC=0 +#CPU_MAX_PERF_ON_AC=100 +#CPU_MIN_PERF_ON_BAT=0 +#CPU_MAX_PERF_ON_BAT=30 + +# Set the CPU "turbo boost" (Intel) or "turbo core" (AMD) feature: +# 0=disable, 1=allow. +# Allows to raise the maximum frequency/P-state of some cores if the +# CPU chip is not fully utilized and below it's intended thermal budget. +# Note: a value of 1 does *not* activate boosting, it just allows it. +# Default: <none> + +#CPU_BOOST_ON_AC=1 +#CPU_BOOST_ON_BAT=0 + +# Set Intel/AMD CPU dynamic boost feature: +# 0=disable, 1=enable. +# Improve performance by increasing minimum P-state limit dynamically +# whenever a task previously waiting on I/O is selected to run. +# Requires: +# * Intel Core i 6th gen. or newer CPU: intel_pstate driver in active mode +# * AMD Zen 2 or newer CPU: amd-pstate driver in active mode ('amd-pstate-epp') +# provided by a yet unreleased kernel 6.x +# Default: <none> + +#CPU_HWP_DYN_BOOST_ON_AC=1 +#CPU_HWP_DYN_BOOST_ON_BAT=0 + +# Kernel NMI Watchdog: +# 0=disable (default, saves power), 1=enable (for kernel debugging only). +# Default: 0 + +#NMI_WATCHDOG=0 + +# Select platform profile: +# performance, balanced, low-power. +# Controls system operating characteristics around power/performance levels, +# thermal and fan speed. Values are given in order of increasing power saving. +# Note: check the output of tlp-stat -p to determine availability on your +# hardware and additional profiles such as: balanced-performance, quiet, cool. +# Default: <none> + +#PLATFORM_PROFILE_ON_AC=performance +#PLATFORM_PROFILE_ON_BAT=low-power + +# System suspend mode: +# s2idle: Idle standby - a pure software, light-weight, system sleep state, +# deep: Suspend to RAM - the whole system is put into a low-power state, +# except for memory, usually resulting in higher savings than s2idle. +# CAUTION: changing suspend mode may lead to system instability and even +# data loss. As for the availability of different modes on your system, +# check the output of tlp-stat -s. If unsure, stick with the system default +# by not enabling this. +# Default: <none> + +#MEM_SLEEP_ON_AC=s2idle +#MEM_SLEEP_ON_BAT=deep + +# Define disk devices on which the following DISK/AHCI_RUNTIME parameters act. +# Separate multiple devices with spaces. +# Devices can be specified by disk ID also (lookup with: tlp diskid). +# Default: "nvme0n1 sda" + +#DISK_DEVICES="nvme0n1 sda" + +# Disk advanced power management level: 1..254, 255 (max saving, min, off). +# Levels 1..127 may spin down the disk; 255 allowable on most drives. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +# Default: 254 (AC), 128 (BAT) + +#DISK_APM_LEVEL_ON_AC="254 254" +#DISK_APM_LEVEL_ON_BAT="128 128" + +# Exclude disk classes from advanced power management (APM): +# sata, ata, usb, ieee1394. +# Separate multiple classes with spaces. +# CAUTION: USB and IEEE1394 disks may fail to mount or data may get corrupted +# with APM enabled. Be careful and make sure you have backups of all affected +# media before removing 'usb' or 'ieee1394' from the denylist! +# Default: "usb ieee1394" + +#DISK_APM_CLASS_DENYLIST="usb ieee1394" + +# Hard disk spin down timeout: +# 0: spin down disabled +# 1..240: timeouts from 5s to 20min (in units of 5s) +# 241..251: timeouts from 30min to 5.5 hours (in units of 30min) +# See 'man hdparm' for details. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the hardware default for the particular disk. +# Default: <none> + +#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0" +#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0" + +# Select I/O scheduler for the disk devices. +# Multi queue (blk-mq) schedulers: +# mq-deadline(*), none, kyber, bfq +# Single queue schedulers: +# deadline(*), cfq, bfq, noop +# (*) recommended. +# Separate values for multiple disks with spaces. Use the special value 'keep' +# to keep the kernel default scheduler for the particular disk. +# Notes: +# - Multi queue (blk-mq) may need kernel boot option 'scsi_mod.use_blk_mq=1' +# and 'modprobe mq-deadline-iosched|kyber|bfq' on kernels < 5.0 +# - Single queue schedulers are legacy now and were removed together with +# the old block layer in kernel 5.0 +# Default: keep + +#DISK_IOSCHED="mq-deadline mq-deadline" + +# AHCI link power management (ALPM) for SATA disks: +# min_power, med_power_with_dipm(*), medium_power, max_performance. +# (*) recommended. +# Multiple values separated with spaces are tried sequentially until success. +# Default: med_power_with_dipm (AC & BAT) + +#SATA_LINKPWR_ON_AC="med_power_with_dipm" +#SATA_LINKPWR_ON_BAT="med_power_with_dipm" + +# Exclude SATA links from AHCI link power management (ALPM). +# SATA links are specified by their host. Refer to the output of +# tlp-stat -d to determine the host; the format is "hostX". +# Separate multiple hosts with spaces. +# Default: <none> + +#SATA_LINKPWR_DENYLIST="host1" + +# Runtime Power Management for NVMe, SATA, ATA and USB disks +# as well as SATA ports: +# on=disable, auto=enable. +# Note: SATA controllers are PCIe bus devices and handled by RUNTIME_PM further +# down. + +# Default: on (AC), auto (BAT) + +#AHCI_RUNTIME_PM_ON_AC=on +#AHCI_RUNTIME_PM_ON_BAT=auto + +# Seconds of inactivity before disk is suspended. +# Note: effective only when AHCI_RUNTIME_PM_ON_AC/BAT is activated. +# Default: 15 + +#AHCI_RUNTIME_PM_TIMEOUT=15 + +# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable. +# Drive can be powered on again by releasing (and reinserting) the eject lever +# or by pressing the disc eject button on newer models. +# Note: an UltraBay/MediaBay hard disk is never powered off. +# Default: 0 + +#BAY_POWEROFF_ON_AC=0 +#BAY_POWEROFF_ON_BAT=0 + +# Optical drive device to power off +# Default: sr0 + +#BAY_DEVICE="sr0" + +# Set the min/max/turbo frequency for the Intel GPU. +# Possible values depend on your hardware. For available frequencies see +# the output of tlp-stat -g. +# Default: <none> + +#INTEL_GPU_MIN_FREQ_ON_AC=0 +#INTEL_GPU_MIN_FREQ_ON_BAT=0 +#INTEL_GPU_MAX_FREQ_ON_AC=0 +#INTEL_GPU_MAX_FREQ_ON_BAT=0 +#INTEL_GPU_BOOST_FREQ_ON_AC=0 +#INTEL_GPU_BOOST_FREQ_ON_BAT=0 + +# AMD GPU power management. +# Performance level (DPM): auto, low, high; auto is recommended. +# Note: requires amdgpu or radeon driver. +# Default: auto + +#RADEON_DPM_PERF_LEVEL_ON_AC=auto +#RADEON_DPM_PERF_LEVEL_ON_BAT=auto + +# Dynamic power management method (DPM): balanced, battery, performance. +# Note: radeon driver only. +# Default: <none> + +#RADEON_DPM_STATE_ON_AC=performance +#RADEON_DPM_STATE_ON_BAT=battery + +# Graphics clock speed (profile method): low, mid, high, auto, default; +# auto = mid on BAT, high on AC. +# Note: radeon driver on legacy ATI hardware only (where DPM is not available). +# Default: default + +#RADEON_POWER_PROFILE_ON_AC=default +#RADEON_POWER_PROFILE_ON_BAT=default + +# Wi-Fi power saving mode: on=enable, off=disable. +# Default: off (AC), on (BAT) + +#WIFI_PWR_ON_AC=off +#WIFI_PWR_ON_BAT=on + +# Disable Wake-on-LAN: Y/N. +# Default: Y + +#WOL_DISABLE=Y + +# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs). +# A value of 0 disables, >= 1 enables power saving. +# Note: 1 is recommended for Linux desktop environments with PulseAudio, +# systems without PulseAudio may require 10. +# Default: 1 + +#SOUND_POWER_SAVE_ON_AC=1 +#SOUND_POWER_SAVE_ON_BAT=1 + +# Disable controller too (HDA only): Y/N. +# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated. +# Default: Y + +#SOUND_POWER_SAVE_CONTROLLER=Y + +# PCIe Active State Power Management (ASPM): +# default(*), performance, powersave, powersupersave. +# (*) keeps BIOS ASPM defaults (recommended) +# Default: <none> + +#PCIE_ASPM_ON_AC=default +#PCIE_ASPM_ON_BAT=default + +# Runtime Power Management for PCIe bus devices: on=disable, auto=enable. +# Default: on (AC), auto (BAT) + +#RUNTIME_PM_ON_AC=on +#RUNTIME_PM_ON_BAT=auto + +# Exclude listed PCIe device adresses from Runtime PM. +# Note: this preserves the kernel driver default, to force a certain state +# use RUNTIME_PM_ENABLE/DISABLE instead. +# Separate multiple addresses with spaces. +# Use lspci to get the adresses (1st column). +# Default: <none> + +#RUNTIME_PM_DENYLIST="11:22.3 44:55.6" + +# Exclude PCIe devices assigned to the listed drivers from Runtime PM. +# Note: this preserves the kernel driver default, to force a certain state +# use RUNTIME_PM_ENABLE/DISABLE instead. +# Separate multiple drivers with spaces. +# Default: "mei_me nouveau radeon", use "" to disable completely. + +#RUNTIME_PM_DRIVER_DENYLIST="mei_me nouveau radeon" + +# Permanently enable/disable Runtime PM for listed PCIe device addresses +# (independent of the power source). This has priority over all preceding +# Runtime PM settings. Separate multiple addresses with spaces. +# Use lspci to get the adresses (1st column). +# Default: <none> + +#RUNTIME_PM_ENABLE="11:22.3" +#RUNTIME_PM_DISABLE="44:55.6" + +# Set to 0 to disable, 1 to enable USB autosuspend feature. +# Default: 1 + +#USB_AUTOSUSPEND=1 + +# Exclude listed devices from USB autosuspend (separate with spaces). +# Use lsusb to get the ids. +# Note: input devices (usbhid) and libsane-supported scanners are excluded +# automatically. +# Default: <none> + +#USB_DENYLIST="1111:2222 3333:4444" + +# Exclude audio devices from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 1 + +#USB_EXCLUDE_AUDIO=1 + +# Exclude bluetooth devices from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 0 + +#USB_EXCLUDE_BTUSB=0 + +# Exclude phone devices from USB autosuspend: +# 0=do not exclude, 1=exclude (enable charging). +# Default: 0 + +#USB_EXCLUDE_PHONE=0 + +# Exclude printers from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 1 + +#USB_EXCLUDE_PRINTER=1 + +# Exclude WWAN devices from USB autosuspend: +# 0=do not exclude, 1=exclude. +# Default: 0 + +#USB_EXCLUDE_WWAN=0 + +# Allow USB autosuspend for listed devices even if already denylisted or +# excluded above (separate with spaces). Use lsusb to get the ids. +# Default: 0 + +#USB_ALLOWLIST="1111:2222 3333:4444" + +# Set to 1 to disable autosuspend before shutdown, 0 to do nothing +# Note: use as a workaround for USB devices that cause shutdown problems. +# Default: 0 + +#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=0 + +# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown +# on system startup: 0=disable, 1=enable. +# Note: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below +# are ignored when this is enabled. +# Default: 0 + +#RESTORE_DEVICE_STATE_ON_STARTUP=0 + +# Radio devices to disable on startup: bluetooth, nfc, wifi, wwan. +# Separate multiple devices with spaces. +# Default: <none> + +#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth nfc wifi wwan" + +# Radio devices to enable on startup: bluetooth, nfc, wifi, wwan. +# Separate multiple devices with spaces. +# Default: <none> + +#DEVICES_TO_ENABLE_ON_STARTUP="wifi" + +# Radio devices to disable on shutdown: bluetooth, nfc, wifi, wwan. +# Note: use as a workaround for devices that are blocking shutdown. +# Default: <none> + +#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth nfc wifi wwan" + +# Radio devices to enable on shutdown: bluetooth, nfc, wifi, wwan. +# (to prevent other operating systems from missing radios). +# Default: <none> + +#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan" + +# Radio devices to enable on AC: bluetooth, nfc, wifi, wwan. +# Default: <none> + +#DEVICES_TO_ENABLE_ON_AC="bluetooth nfc wifi wwan" + +# Radio devices to disable on battery: bluetooth, nfc, wifi, wwan. +# Default: <none> + +#DEVICES_TO_DISABLE_ON_BAT="bluetooth nfc wifi wwan" + +# Radio devices to disable on battery when not in use (not connected): +# bluetooth, nfc, wifi, wwan. +# Default: <none> + +#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth nfc wifi wwan" + +# Battery Care -- Charge thresholds +# Charging starts when the charger is connected and the charge level +# is below the start threshold. Charging stops when the charge level +# is above the stop threshold. +# Required hardware: Lenovo ThinkPads and select other laptop brands +# are driven via specific plugins +# - Active plugin and support status are shown by tlp-stat -b +# - Vendor specific threshold levels are shown by tlp-stat -b, some +# laptops support only 1 (on)/ 0 (off) instead of a percentage level +# - When your hardware supports a start *and* a stop threshold, you must +# specify both, otherwise TLP will refuse to apply the single threshold +# - When your hardware supports only a stop threshold, set the start +# value to 0 +# - Older ThinkPads may require an external kernel module, refer to the +# output of tlp-stat -b +# For further explanation and vendor specific details refer to +# - https://linrunner.de/tlp/settings/battery.html +# - https://linrunner.de/tlp/settings/bc-vendors.html + +# BAT0: Primary / Main / Internal battery +# Note: also use for batteries BATC, BATT and CMB0 +# Default: <none> + +# Battery charge level below which charging will begin. +START_CHARGE_THRESH_BAT0=75 +# Battery charge level above which charging will stop. +STOP_CHARGE_THRESH_BAT0=80 + +# BAT1: Secondary / Ultrabay / Slice / Replaceable battery +# Note: primary on some laptops +# Default: <none> + +# Battery charge level below which charging will begin. +#START_CHARGE_THRESH_BAT1=75 +# Battery charge level above which charging will stop. +#STOP_CHARGE_THRESH_BAT1=80 + +# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable. +# Default: 0 + +RESTORE_THRESHOLDS_ON_BAT=1 + +# Control battery care drivers: 0=disable, 1=enable. +# Default: 1 (all) + +#NATACPI_ENABLE=1 +#TPACPI_ENABLE=1 +#TPSMAPI_ENABLE=1 + +# ------------------------------------------------------------------------------ +# tlp-rdw - Parameters for the radio device wizard + +# Possible devices: bluetooth, wifi, wwan. +# Separate multiple radio devices with spaces. +# Default: <none> (for all parameters below) + +# Radio devices to disable on connect. + +#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" +#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" +#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi" + +# Radio devices to enable on disconnect. + +#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" +#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT="" +#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT="" + +# Radio devices to enable/disable when docked. + +#DEVICES_TO_ENABLE_ON_DOCK="" +#DEVICES_TO_DISABLE_ON_DOCK="" + +# Radio devices to enable/disable when undocked. + +#DEVICES_TO_ENABLE_ON_UNDOCK="wifi" +#DEVICES_TO_DISABLE_ON_UNDOCK="" |