Invoking Haddock
================
Haddock is invoked from the command line, like so:
.. code-block:: none
haddock [option ...] file ...
Where each ``file`` is a filename containing a Haskell source module (.hs)
or a Literate Haskell source module (.lhs) or just a module name.
All the modules specified on the command line will be processed
together. When one module refers to an entity in another module being
processed, the documentation will link directly to that entity.
Entities that cannot be found, for example because they are in a module
that isn't being processed as part of the current batch, simply won't be
hyperlinked in the generated documentation. Haddock will emit warnings
listing all the identifiers it couldn't resolve.
The modules should *not* be mutually recursive, as Haddock don't like
swimming in circles.
Note that while older version would fail on invalid markup, this is
considered a bug in the new versions. If you ever get failed parsing
message, please report it.
You must also specify an option for the output format. Currently only
the :option:`--html` option for HTML and the :option:`--hoogle` option for
outputting Hoogle data are functional.
The packaging tool
`Cabal <http://www.haskell.org/ghc/docs/latest/html/Cabal/index.html>`__
has Haddock support, and is often used instead of invoking Haddock
directly.
The following options are available:
.. option:: -B <dir>
Tell GHC that that its lib directory is dir. Can be used to override
the default path.
.. option:: -o <dir>
--odir=<dir>
Generate files into dir instead of the current directory.
.. option:: -l <dir>
--lib=<dir>
Use Haddock auxiliary files (themes, javascript, etc...) in dir.
.. option:: -i <file>
--read-interface=<file>
-i <docpath>,<file>
--read-interface=<docpath>,<file>
-i <docpath>,<srcpath>,<file>
--read-interface=<docpath>,<srcpath>,<file>
Read the interface file in file, which must have been produced by
running Haddock with the :option:`--dump-interface` option. The interface
describes a set of modules whose HTML documentation is located in
docpath (which may be a relative pathname). The docpath is optional,
and defaults to “.”. The srcpath is optional but has no default
value.
This option allows Haddock to produce separate sets of documentation
with hyperlinks between them. The docpath is used to direct
hyperlinks to point to the right files; so make sure you don't move
the HTML files later or these links will break. Using a relative
docpath means that a documentation subtree can still be moved around
without breaking links.
Similarly to docpath, srcpath is used generate cross-package
hyperlinks but within sources rendered with :option:`--hyperlinked-source`
option.
Multiple :option:`--read-interface` options may be given.
.. option:: -D <file>
--dump-interface=<file>
Produce an interface file [1]_ in the file file. An interface file
contains information Haddock needs to produce more documentation
that refers to the modules currently being processed - see the
:option:`--read-interface` option for more details. The interface file is
in a binary format; don't try to read it.
.. option:: --show-interface=<file>
Dumps a binary interface file to stdout in a human readable fashion.
Uses json as output format.
.. [1]
Haddock interface files are not the same as Haskell interface files,
I just couldn't think of a better name.
.. option:: --html, -h
Generate documentation in HTML format. Several files will be
generated into the current directory (or the specified directory if
the :option:`-o` option is given), including the following:
``module.html``; ``mini_module.html``
An HTML page for each module, and a "mini" page for each used
when viewing their synopsis.
``index.html``
The top level page of the documentation: lists the modules
available, using indentation to represent the hierarchy if the
modules are hierarchical.
``doc-index.html``; ``doc-index-X.html``
The alphabetic index, possibly split into multiple pages if big
enough.
``some.css``; ``etc...``
Files needed for the themes used. Specify your themes using the
:option:`--theme` option.
``haddock-util.js``
Some JavaScript utilities used to implement some of the dynamic
features like collapsible sections.
.. option:: --latex
Generate documentation in LaTeX format. Several files will be
generated into the current directory (or the specified directory if
the :option:`-o` option is given), including the following:
``package.tex``
The top-level LaTeX source file; to format the documentation
into PDF you might run something like this: ::
$ pdflatex package.tex
``haddock.sty``
The default style. The file contains definitions for various
macros used in the LaTeX sources generated by Haddock; to change
the way the formatted output looks, you might want to override
these by specifying your own style with the :option:`--latex-style`
option.
``module.tex``
The LaTeX documentation for each module.
.. option:: --latex-style=<style>
This option lets you override the default style used by the LaTeX
generated by the :option:`--latex` option. Normally Haddock puts a
standard ``haddock.sty`` in the output directory, and includes the
command ``\usepackage{haddock}`` in the LaTeX source. If this option
is given, then ``haddock.sty`` is not generated, and the command is
instead ``\usepackage{style}``.
.. option:: --hoogle
Generate an index file for the
`Hoogle <http://hackage.haskell.org/package/hoogle>`_ search engine.
.. option:: --hyperlinked-source
Generate hyperlinked source code (as HTML web page). All rendered
files will be put into ``src/`` subfolder of output directory.
Usually, this should be used in combination with :option:`--html` option -
generated documentation will then contain references to appropriate
code fragments. Previously, this behaviour could be achieved by
generating sources using external tool and specifying
:option:`--source-base`, :option:`--source-module`, :option:`--source-entity` and
related options. Note that these flags are ignored once
:option:`--hyperlinked-source` is set.
In order to make cross-package source hyperlinking possible,
appropriate source paths have to be set up when providing interface
files using :option:`--read-interface` option.
.. option:: --source-css=<style>
Use custom CSS file for sources rendered by the
:option:`--hyperlinked-source` option. If no custom style file is
provided, Haddock will use default one.
.. option:: -S, --docbook
Reserved for future use (output documentation in DocBook XML
format).
.. option:: --source-base=<url>
--source-module=<url>
--source-entity=<url>
--source-entity-line=<url>
Include links to the source files in the generated documentation.
Use the :option:`--source-base` option to add a source code link in the
header bar of the contents and index pages. Use the
:option:`--source-module` to add a source code link in the header bar of
each module page. Use the :option:`--source-entity` option to add a source
code link next to the documentation for every value and type in each
module. :option:`--source-entity-line` is a flag that gets used for
entities that need to link to an exact source location rather than a
name, eg. since they were defined inside a Template Haskell splice.
In each case URL is the base URL where the source files can be
found. For the per-module and per-entity URLs, the following
substitutions are made within the string URL:
- The string ``%M`` or ``%{MODULE}`` is replaced by the module
name. Note that for the per-entity URLs this is the name of the
*exporting* module.
- The string ``%F`` or ``%{FILE}`` is replaced by the original
source file name. Note that for the per-entity URLs this is the
name of the *defining* module.
- The string ``%N`` or ``%{NAME}`` is replaced by the name of the
exported value or type. This is only valid for the
:option:`--source-entity` option.
- The string ``%K`` or ``%{KIND}`` is replaced by a flag indicating
whether the exported name is a value ``v`` or a type
``t``. This is only valid for the :option:`--source-entity` option.
- The string ``%L`` or ``%{LINE}`` is replaced by the number of the
line where the exported value or type is defined. This is only
valid for the :option:`--source-entity` option.
- The string ``%%`` is replaced by ``%``.
For example, if your sources are online under some directory, you
would say ``haddock --source-base=url/ --source-module=url/%F``
If you have html versions of your sources online with anchors for
each type and function name, you would say
``haddock --source-base=url/ --source-module=url/%M.html --source-entity=url/%M.html#%N``
For the ``%{MODULE}`` substitution you may want to replace the
``.`` character in the module names with some other character
(some web servers are known to get confused by multiple ``.``
characters in a file name). To replace it with a character c use
``%{MODULE/./c}``.
Similarly, for the ``%{FILE}`` substitution you may want to replace
the ``/`` character in the file names with some other character
(especially for links to colourised entity source code with a shared
css file). To replace it with a character c use ``%{FILE///c}``/
One example of a tool that can generate syntax-highlighted HTML from
your source code, complete with anchors suitable for use from
haddock, is
`hscolour <http://www.cs.york.ac.uk/fp/darcs/hscolour>`__.
.. option:: -s <url>
--source=<url>
Deprecated aliases for :option:`--source-module`
.. option:: --comments-base=<url>
--comments-module=<url>
--comments-entity=<url>
documentation. This feature would typically be used in conjunction
with a Wiki system.
Use the :option:`--comments-base` option to add a user comments link in
the header bar of the contents and index pages. Use the
:option:`--comments-module` to add a user comments link in the header bar
of each module page. Use the :option:`--comments-entity` option to add a
comments link next to the documentation for every value and type in
each module.
In each case URL is the base URL where the corresponding comments
page can be found. For the per-module and per-entity URLs the same
substitutions are made as with the :option:`--source-module` and
:option:`--source-entity` options above.
For example, if you want to link the contents page to a wiki page,
and every module to subpages, you would say
``haddock --comments-base=url --comments-module=url/%M``
If your Wiki system doesn't like the ``.`` character in Haskell
module names, you can replace it with a different character. For
example to replace the ``.`` characters with ``_`` use
``haddock --comments-base=url --comments-module=url/%{MODULE/./_}``.
Similarly, you can replace the ``/`` in a file name (may be useful for
entity comments, but probably not).
.. option:: --theme=<path>
Specify a theme to be used for HTML (:option:`--html`) documentation. If
given multiple times then the pages will use the first theme given
by default, and have alternate style sheets for the others. The
reader can switch between themes with browsers that support
alternate style sheets, or with the "Style" menu that gets added
when the page is loaded. If no themes are specified, then just the
default built-in theme ("Ocean") is used.
The path parameter can be one of:
- A *directory*: The base name of the directory becomes the name of
the theme. The directory must contain exactly one ``some.css``
file. Other files, usually image files, will be copied, along
with the ``some.css`` file, into the generated output directory.
- A *CSS file*: The base name of the file becomes the name of the
theme.
- The *name* of a built-in theme ("Ocean" or "Classic").
.. option:: --built-in-themes
Includes the built-in themes ("Ocean" and "Classic"). Can be
combined with :option:`--theme`. Note that order matters: The first
specified theme will be the default.
.. option:: --use-unicode
Enable use of Unicode characters in HTML output.
.. option:: -c <file>
--css=<file>
Deprecated aliases for :option:`--theme`
.. option:: -p <file>
--prologue=<file>
Specify a file containing documentation which is placed on the main
contents page under the heading “Description”. The file is parsed as
a normal Haddock doc comment (but the comment markers are not
required).
.. option:: -t <title>
--title=<title>
Use title as the page heading for each page in the
documentation.This will normally be the name of the library being
documented.
The title should be a plain string (no markup please!).
.. option:: -q <mode>
--qual=<mode>
Specify how identifiers are qualified.
mode should be one of
- ``none`` (default): don't qualify any identifiers
- ``full``: always qualify identifiers completely
- ``local``: only qualify identifiers that are not part of the module
- ``relative``: like local, but strip name of the module from
qualifications of identifiers in submodules
Example: If you generate documentation for module A, then the
identifiers A.x, A.B.y and C.z are qualified as follows.
- none: x, y, z
- full: A.x, A.B.y, C.z
- local: x, A.B.y, C.z
- relative: x, B.y, C.z
.. option:: -?
--help
Display help and exit.
.. option:: -V
--version
Output version information and exit.
.. option:: -v
--verbose
Increase verbosity. Currently this will cause Haddock to emit some
extra warnings, in particular about modules which were imported but
it had no information about (this is often quite normal; for example
when there is no information about the ``Prelude``).
.. option:: --use-contents=<url>
--use-index=<url>
When generating HTML, do not generate an index. Instead, redirect
the Contents and/or Index link on each page to URL. This option is
intended for use in conjunction with :option:`--gen-contents` and/or
:option:`--gen-index` for generating a separate contents and/or index
covering multiple libraries.
.. option:: --gen-contents
--gen-index
Generate an HTML contents and/or index containing entries pulled
from all the specified interfaces (interfaces are specified using
:option:`-i` or :option:`--read-interface`). This is used to generate a single
contents and/or index for multiple sets of Haddock documentation.
.. option:: --ignore-all-exports
Causes Haddock to behave as if every module has the
``ignore-exports`` attribute (:ref:`module-attrs`). This might be useful for
generating implementation documentation rather than interface
documentation, for example.
.. option:: --hide <module>
Causes Haddock to behave as if module module has the ``hide``
attribute. (:ref:`module-attrs`).
.. option:: --show-extensions <module>
Causes Haddock to behave as if module module has the
``show-extensions`` attribute. (:ref:`module-attrs`).
.. option:: --optghc=<option>
Pass option to GHC. Note that there is a double dash there, unlike
for GHC.
.. option:: -w
--no-warnings
Turn off all warnings.
.. option:: --compatible-interface-versions
Prints out space-separated versions of binary Haddock interface
files that this version is compatible with.
.. option:: --no-tmp-comp-dir
Do not use a temporary directory for reading and writing compilation
output files (``.o``, ``.hi``, and stub files). Instead, use the
present directory or another directory that you have explicitly told
GHC to use via the :option:`--optghc` flag.
This flag can be used to avoid recompilation if compilation files
already exist. Compilation files are produced when Haddock has to
process modules that make use of Template Haskell, in which case
Haddock compiles the modules using the GHC API.
.. option:: --print-missing-docs
Print extra information about any undocumented entities.
Using literate or pre-processed source
--------------------------------------
Since Haddock uses GHC internally, both plain and literate Haskell
sources are accepted without the need for the user to do anything. To
use the C pre-processor, however, the user must pass the the :option:`-cpp`
option to GHC using :option:`--optghc`.