Update to attoparsec-0.12.1.1

There seems to be memory and speed improvement.

9 files changed, 0 insertions, 1993 deletions

diff --git a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec.hs b/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec.hs
deleted file mode 100644
index 41b4ed30..00000000
--- a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec.hs
+++ /dev/null
@@ -1,18 +0,0 @@
--- |
--- Module      :  Data.Attoparsec
--- Copyright   :  Bryan O'Sullivan 2007-2011
--- License     :  BSD3
---
--- Maintainer  :  bos@serpentine.com
--- Stability   :  experimental
--- Portability :  unknown
---
--- Simple, efficient combinator parsing for 'ByteString' strings,
--- loosely based on the Parsec library.
-
-module Data.Attoparsec
-    (
-      module Data.Attoparsec.ByteString
-    ) where
-
-import Data.Attoparsec.ByteString
diff --git a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/ByteString.hs b/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/ByteString.hs
deleted file mode 100644
index d2f3761c..00000000
--- a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/ByteString.hs
+++ /dev/null
@@ -1,205 +0,0 @@
--- |
--- Module      :  Data.Attoparsec.ByteString
--- Copyright   :  Bryan O'Sullivan 2007-2011
--- License     :  BSD3
---
--- Maintainer  :  bos@serpentine.com
--- Stability   :  experimental
--- Portability :  unknown
---
--- Simple, efficient combinator parsing for 'B.ByteString' strings,
--- loosely based on the Parsec library.
-
-module Data.Attoparsec.ByteString
-    (
-    -- * Differences from Parsec
-    -- $parsec
-
-    -- * Incremental input
-    -- $incremental
-
-    -- * Performance considerations
-    -- $performance
-
-    -- * Parser types
-      I.Parser
-    , Result
-    , T.IResult(..)
-    , I.compareResults
-
-    -- * Running parsers
-    , parse
-    , feed
-    , I.parseOnly
-    , parseWith
-    , parseTest
-
-    -- ** Result conversion
-    , maybeResult
-    , eitherResult
-
-    -- * Combinators
-    , (I.<?>)
-    , I.try
-    , module Data.Attoparsec.Combinator
-
-    -- * Parsing individual bytes
-    , I.word8
-    , I.anyWord8
-    , I.notWord8
-    , I.peekWord8
-    , I.satisfy
-    , I.satisfyWith
-    , I.skip
-
-    -- ** Byte classes
-    , I.inClass
-    , I.notInClass
-
-    -- * Efficient string handling
-    , I.string
-    , I.skipWhile
-    , I.take
-    , I.scan
-    , I.takeWhile
-    , I.takeWhile1
-    , I.takeTill
-
-    -- ** Consume all remaining input
-    , I.takeByteString
-    , I.takeLazyByteString
-
-    -- * State observation and manipulation functions
-    , I.endOfInput
-    , I.atEnd
-    ) where
-
-import Data.Attoparsec.Combinator
-import qualified Data.Attoparsec.ByteString.Internal as I
-import qualified Data.Attoparsec.Internal as I
-import qualified Data.ByteString as B
-import Data.Attoparsec.ByteString.Internal (Result, parse)
-import qualified Data.Attoparsec.Internal.Types as T
-
--- $parsec
---
--- Compared to Parsec 3, Attoparsec makes several tradeoffs.  It is
--- not intended for, or ideal for, all possible uses.
---
--- * While Attoparsec can consume input incrementally, Parsec cannot.
---   Incremental input is a huge deal for efficient and secure network
---   and system programming, since it gives much more control to users
---   of the library over matters such as resource usage and the I/O
---   model to use.
---
--- * Much of the performance advantage of Attoparsec is gained via
---   high-performance parsers such as 'I.takeWhile' and 'I.string'.
---   If you use complicated combinators that return lists of bytes or
---   characters, there is less performance difference between the two
---   libraries.
---
--- * Unlike Parsec 3, Attoparsec does not support being used as a
---   monad transformer.
---
--- * Attoparsec is specialised to deal only with strict 'B.ByteString'
---   input.  Efficiency concerns rule out both lists and lazy
---   bytestrings.  The usual use for lazy bytestrings would be to
---   allow consumption of very large input without a large footprint.
---   For this need, Attoparsec's incremental input provides an
---   excellent substitute, with much more control over when input
---   takes place.  If you must use lazy bytestrings, see the 'Lazy'
---   module, which feeds lazy chunks to a regular parser.
---
--- * Parsec parsers can produce more helpful error messages than
---   Attoparsec parsers.  This is a matter of focus: Attoparsec avoids
---   the extra book-keeping in favour of higher performance.
-
--- $incremental
---
--- Attoparsec supports incremental input, meaning that you can feed it
--- a bytestring that represents only part of the expected total amount
--- of data to parse. If your parser reaches the end of a fragment of
--- input and could consume more input, it will suspend parsing and
--- return a 'T.Partial' continuation.
---
--- Supplying the 'T.Partial' continuation with another bytestring will
--- resume parsing at the point where it was suspended. You must be
--- prepared for the result of the resumed parse to be another
--- 'T.Partial' continuation.
---
--- To indicate that you have no more input, supply the 'T.Partial'
--- continuation with an empty bytestring.
---
--- Remember that some parsing combinators will not return a result
--- until they reach the end of input.  They may thus cause 'T.Partial'
--- results to be returned.
---
--- If you do not need support for incremental input, consider using
--- the 'I.parseOnly' function to run your parser.  It will never
--- prompt for more input.
-
--- $performance
---
--- If you write an Attoparsec-based parser carefully, it can be
--- realistic to expect it to perform within a factor of 2 of a
--- hand-rolled C parser (measuring megabytes parsed per second).
---
--- To actually achieve high performance, there are a few guidelines
--- that it is useful to follow.
---
--- Use the 'B.ByteString'-oriented parsers whenever possible,
--- e.g. 'I.takeWhile1' instead of 'many1' 'I.anyWord8'.  There is
--- about a factor of 100 difference in performance between the two
--- kinds of parser.
---
--- For very simple byte-testing predicates, write them by hand instead
--- of using 'I.inClass' or 'I.notInClass'.  For instance, both of
--- these predicates test for an end-of-line byte, but the first is
--- much faster than the second:
---
--- >endOfLine_fast w = w == 13 || w == 10
--- >endOfLine_slow   = inClass "\r\n"
---
--- Make active use of benchmarking and profiling tools to measure,
--- find the problems with, and improve the performance of your parser.
-
--- | If a parser has returned a 'T.Partial' result, supply it with more
--- input.
-feed :: Result r -> B.ByteString -> Result r
-feed f@(T.Fail _ _ _) _ = f
-feed (T.Partial k) d    = k d
-feed (T.Done bs r) d    = T.Done (B.append bs d) r
-{-# INLINE feed #-}
-
--- | Run a parser and print its result to standard output.
-parseTest :: (Show a) => I.Parser a -> B.ByteString -> IO ()
-parseTest p s = print (parse p s)
-
--- | Run a parser with an initial input string, and a monadic action
--- that can supply more input if needed.
-parseWith :: Monad m =>
-             (m B.ByteString)
-          -- ^ An action that will be executed to provide the parser
-          -- with more input, if necessary.  The action must return an
-          -- 'B.empty' string when there is no more input available.
-          -> I.Parser a
-          -> B.ByteString
-          -- ^ Initial input for the parser.
-          -> m (Result a)
-parseWith refill p s = step $ parse p s
-  where step (T.Partial k) = (step . k) =<< refill
-        step r             = return r
-{-# INLINE parseWith #-}
-
--- | Convert a 'Result' value to a 'Maybe' value. A 'T.Partial' result
--- is treated as failure.
-maybeResult :: Result r -> Maybe r
-maybeResult (T.Done _ r) = Just r
-maybeResult _            = Nothing
-
--- | Convert a 'Result' value to an 'Either' value. A 'T.Partial'
--- result is treated as failure.
-eitherResult :: Result r -> Either String r
-eitherResult (T.Done _ r)     = Right r
-eitherResult (T.Fail _ _ msg) = Left msg
-eitherResult _                = Left "Result: incomplete input"
diff --git a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/ByteString/Char8.hs b/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/ByteString/Char8.hs
deleted file mode 100644
index 3bbe51f0..00000000
--- a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/ByteString/Char8.hs
+++ /dev/null
@@ -1,549 +0,0 @@
-{-# LANGUAGE BangPatterns, FlexibleInstances, TypeFamilies,
-    TypeSynonymInstances, GADTs #-}
-{-# OPTIONS_GHC -fno-warn-orphans #-}
-
--- |
--- Module      :  Data.Attoparsec.ByteString.Char8
--- Copyright   :  Bryan O'Sullivan 2007-2011
--- License     :  BSD3
---
--- Maintainer  :  bos@serpentine.com
--- Stability   :  experimental
--- Portability :  unknown
---
--- Simple, efficient, character-oriented combinator parsing for
--- 'B.ByteString' strings, loosely based on the Parsec library.
-
-module Data.Attoparsec.ByteString.Char8
-    (
-    -- * Character encodings
-    -- $encodings
-
-    -- * Parser types
-      Parser
-    , A.Result
-    , A.IResult(..)
-    , I.compareResults
-
-    -- * Running parsers
-    , A.parse
-    , A.feed
-    , A.parseOnly
-    , A.parseTest
-    , A.parseWith
-
-    -- ** Result conversion
-    , A.maybeResult
-    , A.eitherResult
-
-    -- * Combinators
-    , (I.<?>)
-    , I.try
-    , module Data.Attoparsec.Combinator
-
-    -- * Parsing individual characters
-    , char
-    , char8
-    , anyChar
-    , notChar
-    , peekChar
-    , satisfy
-
-    -- ** Special character parsers
-    , digit
-    , letter_iso8859_15
-    , letter_ascii
-    , space
-
-    -- ** Fast predicates
-    , isDigit
-    , isDigit_w8
-    , isAlpha_iso8859_15
-    , isAlpha_ascii
-    , isSpace
-    , isSpace_w8
-
-    -- *** Character classes
-    , inClass
-    , notInClass
-
-    -- * Efficient string handling
-    , I.string
-    , stringCI
-    , skipSpace
-    , skipWhile
-    , I.take
-    , scan
-    , takeWhile
-    , takeWhile1
-    , takeTill
-
-    -- ** String combinators
-    -- $specalt
-    , (.*>)
-    , (<*.)
-
-    -- ** Consume all remaining input
-    , I.takeByteString
-    , I.takeLazyByteString
-
-    -- * Text parsing
-    , I.endOfLine
-    , isEndOfLine
-    , isHorizontalSpace
-
-    -- * Numeric parsers
-    , decimal
-    , hexadecimal
-    , signed
-    , double
-    , Number(..)
-    , number
-    , rational
-
-    -- * State observation and manipulation functions
-    , I.endOfInput
-    , I.atEnd
-    ) where
-
-import Control.Applicative ((*>), (<*), (<$>), (<|>))
-import Data.Attoparsec.ByteString.FastSet (charClass, memberChar)
-import Data.Attoparsec.ByteString.Internal (Parser, (<?>))
-import Data.Attoparsec.Combinator
-import Data.Attoparsec.Number (Number(..))
-import Data.Bits (Bits, (.|.), shiftL)
-import Data.ByteString.Internal (c2w, w2c)
-import Data.Int (Int8, Int16, Int32, Int64)
-import Data.Ratio ((%))
-import Data.String (IsString(..))
-import Data.Word (Word8, Word16, Word32, Word64, Word)
-import Prelude hiding (takeWhile)
-import qualified Data.Attoparsec.ByteString as A
-import qualified Data.Attoparsec.ByteString.Internal as I
-import qualified Data.Attoparsec.Internal as I
-import qualified Data.ByteString as B8
-import qualified Data.ByteString.Char8 as B
-
-instance (a ~ B.ByteString) => IsString (Parser a) where
-    fromString = I.string . B.pack
-
--- $encodings
---
--- This module is intended for parsing text that is
--- represented using an 8-bit character set, e.g. ASCII or
--- ISO-8859-15.  It /does not/ make any attempt to deal with character
--- encodings, multibyte characters, or wide characters.  In
--- particular, all attempts to use characters above code point U+00FF
--- will give wrong answers.
---
--- Code points below U+0100 are simply translated to and from their
--- numeric values, so e.g. the code point U+00A4 becomes the byte
--- @0xA4@ (which is the Euro symbol in ISO-8859-15, but the generic
--- currency sign in ISO-8859-1).  Haskell 'Char' values above U+00FF
--- are truncated, so e.g. U+1D6B7 is truncated to the byte @0xB7@.
-
--- ASCII-specific but fast, oh yes.
-toLower :: Word8 -> Word8
-toLower w | w >= 65 && w <= 90 = w + 32
-          | otherwise          = w
-
--- | Satisfy a literal string, ignoring case.
-stringCI :: B.ByteString -> Parser B.ByteString
-stringCI = I.stringTransform (B8.map toLower)
-{-# INLINE stringCI #-}
-
--- | Consume input as long as the predicate returns 'True', and return
--- the consumed input.
---
--- This parser requires the predicate to succeed on at least one byte
--- of input: it will fail if the predicate never returns 'True' or if
--- there is no input left.
-takeWhile1 :: (Char -> Bool) -> Parser B.ByteString
-takeWhile1 p = I.takeWhile1 (p . w2c)
-{-# INLINE takeWhile1 #-}
-
--- | The parser @satisfy p@ succeeds for any byte for which the
--- predicate @p@ returns 'True'. Returns the byte that is actually
--- parsed.
---
--- >digit = satisfy isDigit
--- >    where isDigit c = c >= '0' && c <= '9'
-satisfy :: (Char -> Bool) -> Parser Char
-satisfy = I.satisfyWith w2c
-{-# INLINE satisfy #-}
-
--- | Match a letter, in the ISO-8859-15 encoding.
-letter_iso8859_15 :: Parser Char
-letter_iso8859_15 = satisfy isAlpha_iso8859_15 <?> "letter_iso8859_15"
-{-# INLINE letter_iso8859_15 #-}
-
--- | Match a letter, in the ASCII encoding.
-letter_ascii :: Parser Char
-letter_ascii = satisfy isAlpha_ascii <?> "letter_ascii"
-{-# INLINE letter_ascii #-}
-
--- | A fast alphabetic predicate for the ISO-8859-15 encoding
---
--- /Note/: For all character encodings other than ISO-8859-15, and
--- almost all Unicode code points above U+00A3, this predicate gives
--- /wrong answers/.
-isAlpha_iso8859_15 :: Char -> Bool
-isAlpha_iso8859_15 c = (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z') ||
-                       (c >= '\166' && moby c)
-  where moby = notInClass "\167\169\171-\179\182\183\185\187\191\215\247"
-        {-# NOINLINE moby #-}
-{-# INLINE isAlpha_iso8859_15 #-}
-
--- | A fast alphabetic predicate for the ASCII encoding
---
--- /Note/: For all character encodings other than ASCII, and
--- almost all Unicode code points above U+007F, this predicate gives
--- /wrong answers/.
-isAlpha_ascii :: Char -> Bool
-isAlpha_ascii c = (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z')
-{-# INLINE isAlpha_ascii #-}
-
--- | Parse a single digit.
-digit :: Parser Char
-digit = satisfy isDigit <?> "digit"
-{-# INLINE digit #-}
-
--- | A fast digit predicate.
-isDigit :: Char -> Bool
-isDigit c = c >= '0' && c <= '9'
-{-# INLINE isDigit #-}
-
--- | A fast digit predicate.
-isDigit_w8 :: Word8 -> Bool
-isDigit_w8 w = w >= 48 && w <= 57
-{-# INLINE isDigit_w8 #-}
-
--- | Match any character.
-anyChar :: Parser Char
-anyChar = satisfy $ const True
-{-# INLINE anyChar #-}
-
--- | Match any character. Returns 'Nothing' if end of input has been
--- reached. Does not consume any input.
---
--- /Note/: Because this parser does not fail, do not use it with
--- combinators such as 'many', because such parsers loop until a
--- failure occurs.  Careless use will thus result in an infinite loop.
-peekChar :: Parser (Maybe Char)
-peekChar = (fmap w2c) `fmap` I.peekWord8
-{-# INLINE peekChar #-}
-
--- | Fast predicate for matching ASCII space characters.
---
--- /Note/: This predicate only gives correct answers for the ASCII
--- encoding.  For instance, it does not recognise U+00A0 (non-breaking
--- space) as a space character, even though it is a valid ISO-8859-15
--- byte. For a Unicode-aware and only slightly slower predicate,
--- use 'Data.Char.isSpace'
-isSpace :: Char -> Bool
-isSpace c = (c == ' ') || ('\t' <= c && c <= '\r')
-{-# INLINE isSpace #-}
-
--- | Fast 'Word8' predicate for matching ASCII space characters.
-isSpace_w8 :: Word8 -> Bool
-isSpace_w8 w = (w == 32) || (9 <= w && w <= 13)
-{-# INLINE isSpace_w8 #-}
-
-
--- | Parse a space character.
---
--- /Note/: This parser only gives correct answers for the ASCII
--- encoding.  For instance, it does not recognise U+00A0 (non-breaking
--- space) as a space character, even though it is a valid ISO-8859-15
--- byte.
-space :: Parser Char
-space = satisfy isSpace <?> "space"
-{-# INLINE space #-}
-
--- | Match a specific character.
-char :: Char -> Parser Char
-char c = satisfy (== c) <?> [c]
-{-# INLINE char #-}
-
--- | Match a specific character, but return its 'Word8' value.
-char8 :: Char -> Parser Word8
-char8 c = I.satisfy (== c2w c) <?> [c]
-{-# INLINE char8 #-}
-
--- | Match any character except the given one.
-notChar :: Char -> Parser Char
-notChar c = satisfy (/= c) <?> "not " ++ [c]
-{-# INLINE notChar #-}
-
--- | Match any character in a set.
---
--- >vowel = inClass "aeiou"
---
--- Range notation is supported.
---
--- >halfAlphabet = inClass "a-nA-N"
---
--- To add a literal \'-\' to a set, place it at the beginning or end
--- of the string.
-inClass :: String -> Char -> Bool
-inClass s = (`memberChar` mySet)
-    where mySet = charClass s
-{-# INLINE inClass #-}
-
--- | Match any character not in a set.
-notInClass :: String -> Char -> Bool
-notInClass s = not . inClass s
-{-# INLINE notInClass #-}
-
--- | Consume input as long as the predicate returns 'True', and return
--- the consumed input.
---
--- This parser does not fail.  It will return an empty string if the
--- predicate returns 'False' on the first byte of input.
---
--- /Note/: Because this parser does not fail, do not use it with
--- combinators such as 'many', because such parsers loop until a
--- failure occurs.  Careless use will thus result in an infinite loop.
-takeWhile :: (Char -> Bool) -> Parser B.ByteString
-takeWhile p = I.takeWhile (p . w2c)
-{-# INLINE takeWhile #-}
-
--- | A stateful scanner.  The predicate consumes and transforms a
--- state argument, and each transformed state is passed to successive
--- invocations of the predicate on each byte of the input until one
--- returns 'Nothing' or the input ends.
---
--- This parser does not fail.  It will return an empty string if the
--- predicate returns 'Nothing' on the first byte of input.
---
--- /Note/: Because this parser does not fail, do not use it with
--- combinators such as 'many', because such parsers loop until a
--- failure occurs.  Careless use will thus result in an infinite loop.
-scan :: s -> (s -> Char -> Maybe s) -> Parser B.ByteString
-scan s0 p = I.scan s0 (\s -> p s . w2c)
-{-# INLINE scan #-}
-
--- | Consume input as long as the predicate returns 'False'
--- (i.e. until it returns 'True'), and return the consumed input.
---
--- This parser does not fail.  It will return an empty string if the
--- predicate returns 'True' on the first byte of input.
---
--- /Note/: Because this parser does not fail, do not use it with
--- combinators such as 'many', because such parsers loop until a
--- failure occurs.  Careless use will thus result in an infinite loop.
-takeTill :: (Char -> Bool) -> Parser B.ByteString
-takeTill p = I.takeTill (p . w2c)
-{-# INLINE takeTill #-}
-
--- | Skip past input for as long as the predicate returns 'True'.
-skipWhile :: (Char -> Bool) -> Parser ()
-skipWhile p = I.skipWhile (p . w2c)
-{-# INLINE skipWhile #-}
-
--- | Skip over white space.
-skipSpace :: Parser ()
-skipSpace = I.skipWhile isSpace_w8
-{-# INLINE skipSpace #-}
-
--- $specalt
---
--- The '.*>' and '<*.' combinators are intended for use with the
--- @OverloadedStrings@ language extension.  They simplify the common
--- task of matching a statically known string, then immediately
--- parsing something else.
---
--- An example makes this easier to understand:
---
--- @{-\# LANGUAGE OverloadedStrings #-}
---
--- shoeSize = \"Shoe size: \" '.*>' 'decimal'
--- @
---
--- If we were to try to use '*>' above instead, the type checker would
--- not be able to tell which 'IsString' instance to use for the text
--- in quotes.  We would have to be explicit, using either a type
--- signature or the 'I.string' parser.
-
--- | Type-specialized version of '*>' for 'B.ByteString'.
-(.*>) :: B.ByteString -> Parser a -> Parser a
-s .*> f = I.string s *> f
-
--- | Type-specialized version of '<*' for 'B.ByteString'.
-(<*.) :: Parser a -> B.ByteString -> Parser a
-f <*. s = f <* I.string s
-
--- | A predicate that matches either a carriage return @\'\\r\'@ or
--- newline @\'\\n\'@ character.
-isEndOfLine :: Word8 -> Bool
-isEndOfLine w = w == 13 || w == 10
-{-# INLINE isEndOfLine #-}
-
--- | A predicate that matches either a space @\' \'@ or horizontal tab
--- @\'\\t\'@ character.
-isHorizontalSpace :: Word8 -> Bool
-isHorizontalSpace w = w == 32 || w == 9
-{-# INLINE isHorizontalSpace #-}
-
--- | Parse and decode an unsigned hexadecimal number.  The hex digits
--- @\'a\'@ through @\'f\'@ may be upper or lower case.
---
--- This parser does not accept a leading @\"0x\"@ string.
-hexadecimal :: (Integral a, Bits a) => Parser a
-hexadecimal = B8.foldl' step 0 `fmap` I.takeWhile1 isHexDigit
-  where
-    isHexDigit w = (w >= 48 && w <= 57) ||
-                   (w >= 97 && w <= 102) ||
-                   (w >= 65 && w <= 70)
-    step a w | w >= 48 && w <= 57  = (a `shiftL` 4) .|. fromIntegral (w - 48)
-             | w >= 97             = (a `shiftL` 4) .|. fromIntegral (w - 87)
-             | otherwise           = (a `shiftL` 4) .|. fromIntegral (w - 55)
-{-# SPECIALISE hexadecimal :: Parser Int #-}
-{-# SPECIALISE hexadecimal :: Parser Int8 #-}
-{-# SPECIALISE hexadecimal :: Parser Int16 #-}
-{-# SPECIALISE hexadecimal :: Parser Int32 #-}
-{-# SPECIALISE hexadecimal :: Parser Int64 #-}
-{-# SPECIALISE hexadecimal :: Parser Integer #-}
-{-# SPECIALISE hexadecimal :: Parser Word #-}
-{-# SPECIALISE hexadecimal :: Parser Word8 #-}
-{-# SPECIALISE hexadecimal :: Parser Word16 #-}
-{-# SPECIALISE hexadecimal :: Parser Word32 #-}
-{-# SPECIALISE hexadecimal :: Parser Word64 #-}
-
--- | Parse and decode an unsigned decimal number.
-decimal :: Integral a => Parser a
-decimal = B8.foldl' step 0 `fmap` I.takeWhile1 isDig
-  where isDig w  = w >= 48 && w <= 57
-        step a w = a * 10 + fromIntegral (w - 48)
-{-# SPECIALISE decimal :: Parser Int #-}
-{-# SPECIALISE decimal :: Parser Int8 #-}
-{-# SPECIALISE decimal :: Parser Int16 #-}
-{-# SPECIALISE decimal :: Parser Int32 #-}
-{-# SPECIALISE decimal :: Parser Int64 #-}
-{-# SPECIALISE decimal :: Parser Integer #-}
-{-# SPECIALISE decimal :: Parser Word #-}
-{-# SPECIALISE decimal :: Parser Word8 #-}
-{-# SPECIALISE decimal :: Parser Word16 #-}
-{-# SPECIALISE decimal :: Parser Word32 #-}
-{-# SPECIALISE decimal :: Parser Word64 #-}
-
--- | Parse a number with an optional leading @\'+\'@ or @\'-\'@ sign
--- character.
-signed :: Num a => Parser a -> Parser a
-{-# SPECIALISE signed :: Parser Int -> Parser Int #-}
-{-# SPECIALISE signed :: Parser Int8 -> Parser Int8 #-}
-{-# SPECIALISE signed :: Parser Int16 -> Parser Int16 #-}
-{-# SPECIALISE signed :: Parser Int32 -> Parser Int32 #-}
-{-# SPECIALISE signed :: Parser Int64 -> Parser Int64 #-}
-{-# SPECIALISE signed :: Parser Integer -> Parser Integer #-}
-signed p = (negate <$> (char8 '-' *> p))
-       <|> (char8 '+' *> p)
-       <|> p
-
--- | Parse a rational number.
---
--- This parser accepts an optional leading sign character, followed by
--- at least one decimal digit.  The syntax similar to that accepted by
--- the 'read' function, with the exception that a trailing @\'.\'@ or
--- @\'e\'@ /not/ followed by a number is not consumed.
---
--- Examples with behaviour identical to 'read', if you feed an empty
--- continuation to the first result:
---
--- >rational "3"     == Done 3.0 ""
--- >rational "3.1"   == Done 3.1 ""
--- >rational "3e4"   == Done 30000.0 ""
--- >rational "3.1e4" == Done 31000.0, ""
---
--- Examples with behaviour identical to 'read':
---
--- >rational ".3"    == Fail "input does not start with a digit"
--- >rational "e3"    == Fail "input does not start with a digit"
---
--- Examples of differences from 'read':
---
--- >rational "3.foo" == Done 3.0 ".foo"
--- >rational "3e"    == Done 3.0 "e"
---
--- This function does not accept string representations of \"NaN\" or
--- \"Infinity\".
-rational :: Fractional a => Parser a
-{-# SPECIALIZE rational :: Parser Double #-}
-{-# SPECIALIZE rational :: Parser Float #-}
-{-# SPECIALIZE rational :: Parser Rational #-}
-rational = floaty $ \real frac fracDenom -> fromRational $
-                     real % 1 + frac % fracDenom
-
--- | Parse a rational number.
---
--- The syntax accepted by this parser is the same as for 'rational'.
---
--- /Note/: This function is almost ten times faster than 'rational',
--- but is slightly less accurate.
---
--- The 'Double' type supports about 16 decimal places of accuracy.
--- For 94.2% of numbers, this function and 'rational' give identical
--- results, but for the remaining 5.8%, this function loses precision
--- around the 15th decimal place.  For 0.001% of numbers, this
--- function will lose precision at the 13th or 14th decimal place.
---
--- This function does not accept string representations of \"NaN\" or
--- \"Infinity\".
-double :: Parser Double
-double = floaty asDouble
-
-asDouble :: Integer -> Integer -> Integer -> Double
-asDouble real frac fracDenom =
-    fromIntegral real + fromIntegral frac / fromIntegral fracDenom
-{-# INLINE asDouble #-}
-
--- | Parse a number, attempting to preserve both speed and precision.
---
--- The syntax accepted by this parser is the same as for 'rational'.
---
--- /Note/: This function is almost ten times faster than 'rational'.
--- On integral inputs, it gives perfectly accurate answers, and on
--- floating point inputs, it is slightly less accurate than
--- 'rational'.
---
--- This function does not accept string representations of \"NaN\" or
--- \"Infinity\".
-number :: Parser Number
-number = floaty $ \real frac fracDenom ->
-         if frac == 0 && fracDenom == 0
-         then I real
-         else D (asDouble real frac fracDenom)
-{-# INLINE number #-}
-
-data T = T !Integer !Int
-
-floaty :: Fractional a => (Integer -> Integer -> Integer -> a) -> Parser a
-{-# INLINE floaty #-}
-floaty f = do
-  let minus = 45
-      plus  = 43
-  !positive <- ((== plus) <$> I.satisfy (\c -> c == minus || c == plus)) <|>
-               return True
-  real <- decimal
-  let tryFraction = do
-        let dot = 46
-        _ <- I.satisfy (==dot)
-        ds <- I.takeWhile isDigit_w8
-        case I.parseOnly decimal ds of
-                Right n -> return $ T n (B.length ds)
-                _       -> fail "no digits after decimal"
-  T fraction fracDigits <- tryFraction <|> return (T 0 0)
-  let littleE = 101
-      bigE    = 69
-      e w = w == littleE || w == bigE
-  power <- (I.satisfy e *> signed decimal) <|> return (0::Int)
-  let n = if fracDigits == 0
-          then if power == 0
-               then fromIntegral real
-               else fromIntegral real * (10 ^^ power)
-          else if power == 0
-               then f real fraction (10 ^ fracDigits)
-               else f real fraction (10 ^ fracDigits) * (10 ^^ power)
-  return $ if positive
-           then n
-           else -n
diff --git a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/ByteString/FastSet.hs b/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/ByteString/FastSet.hs
deleted file mode 100644
index 73d02056..00000000
--- a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/ByteString/FastSet.hs
+++ /dev/null
@@ -1,115 +0,0 @@
-{-# LANGUAGE BangPatterns, MagicHash #-}
-
------------------------------------------------------------------------------
--- |
--- Module      :  Data.Attoparsec.ByteString.FastSet
--- Copyright   :  Bryan O'Sullivan 2008
--- License     :  BSD3
---
--- Maintainer  :  bos@serpentine.com
--- Stability   :  experimental
--- Portability :  unknown
---
--- Fast set membership tests for 'Word8' and 8-bit 'Char' values.  The
--- set representation is unboxed for efficiency.  For small sets, we
--- test for membership using a binary search.  For larger sets, we use
--- a lookup table.
---
------------------------------------------------------------------------------
-module Data.Attoparsec.ByteString.FastSet
-    (
-    -- * Data type
-      FastSet
-    -- * Construction
-    , fromList
-    , set
-    -- * Lookup
-    , memberChar
-    , memberWord8
-    -- * Debugging
-    , fromSet
-    -- * Handy interface
-    , charClass
-    ) where
-
-import Data.Bits ((.&.), (.|.))
-import Foreign.Storable (peekByteOff, pokeByteOff)
-import GHC.Base (Int(I#), iShiftRA#, narrow8Word#, shiftL#)
-import GHC.Word (Word8(W8#))
-import qualified Data.ByteString as B
-import qualified Data.ByteString.Char8 as B8
-import qualified Data.ByteString.Internal as I
-import qualified Data.ByteString.Unsafe as U
-
-data FastSet = Sorted { fromSet :: !B.ByteString }
-             | Table  { fromSet :: !B.ByteString }
-    deriving (Eq, Ord)
-
-instance Show FastSet where
-    show (Sorted s) = "FastSet Sorted " ++ show (B8.unpack s)
-    show (Table _) = "FastSet Table"
-
--- | The lower bound on the size of a lookup table.  We choose this to
--- balance table density against performance.
-tableCutoff :: Int
-tableCutoff = 8
-
--- | Create a set.
-set :: B.ByteString -> FastSet
-set s | B.length s < tableCutoff = Sorted . B.sort $ s
-      | otherwise                = Table . mkTable $ s
-
-fromList :: [Word8] -> FastSet
-fromList = set . B.pack
-
-data I = I {-# UNPACK #-} !Int {-# UNPACK #-} !Word8
-
-shiftR :: Int -> Int -> Int
-shiftR (I# x#) (I# i#) = I# (x# `iShiftRA#` i#)
-
-shiftL :: Word8 -> Int -> Word8
-shiftL (W8# x#) (I# i#) = W8# (narrow8Word# (x# `shiftL#` i#))
-
-index :: Int -> I
-index i = I (i `shiftR` 3) (1 `shiftL` (i .&. 7))
-{-# INLINE index #-}
-
--- | Check the set for membership.
-memberWord8 :: Word8 -> FastSet -> Bool
-memberWord8 w (Table t)  =
-    let I byte bit = index (fromIntegral w)
-    in  U.unsafeIndex t byte .&. bit /= 0
-memberWord8 w (Sorted s) = search 0 (B.length s - 1)
-    where search lo hi
-              | hi < lo = False
-              | otherwise =
-                  let mid = (lo + hi) `div` 2
-                  in case compare w (U.unsafeIndex s mid) of
-                       GT -> search (mid + 1) hi
-                       LT -> search lo (mid - 1)
-                       _ -> True
-
--- | Check the set for membership.  Only works with 8-bit characters:
--- characters above code point 255 will give wrong answers.
-memberChar :: Char -> FastSet -> Bool
-memberChar c = memberWord8 (I.c2w c)
-{-# INLINE memberChar #-}
-
-mkTable :: B.ByteString -> B.ByteString
-mkTable s = I.unsafeCreate 32 $ \t -> do
-            _ <- I.memset t 0 32
-            U.unsafeUseAsCStringLen s $ \(p, l) ->
-              let loop n | n == l = return ()
-                         | otherwise = do
-                    c <- peekByteOff p n :: IO Word8
-                    let I byte bit = index (fromIntegral c)
-                    prev <- peekByteOff t byte :: IO Word8
-                    pokeByteOff t byte (prev .|. bit)
-                    loop (n + 1)
-              in loop 0
-
-charClass :: String -> FastSet
-charClass = set . B8.pack . go
-    where go (a:'-':b:xs) = [a..b] ++ go xs
-          go (x:xs) = x : go xs
-          go _ = ""
diff --git a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/ByteString/Internal.hs b/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/ByteString/Internal.hs
deleted file mode 100644
index b3699728..00000000
--- a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/ByteString/Internal.hs
+++ /dev/null
@@ -1,516 +0,0 @@
-{-# LANGUAGE BangPatterns, CPP, Rank2Types, OverloadedStrings,
-    RecordWildCards, MagicHash, UnboxedTuples #-}
--- |
--- Module      :  Data.Attoparsec.ByteString.Internal
--- Copyright   :  Bryan O'Sullivan 2007-2011
--- License     :  BSD3
---
--- Maintainer  :  bos@serpentine.com
--- Stability   :  experimental
--- Portability :  unknown
---
--- Simple, efficient parser combinators for 'B.ByteString' strings,
--- loosely based on the Parsec library.
-
-module Data.Attoparsec.ByteString.Internal
-    (
-    -- * Parser types
-      Parser
-    , Result
-
-    -- * Running parsers
-    , parse
-    , parseOnly
-
-    -- * Combinators
-    , (<?>)
-    , try
-    , module Data.Attoparsec.Combinator
-
-    -- * Parsing individual bytes
-    , satisfy
-    , satisfyWith
-    , anyWord8
-    , skip
-    , word8
-    , notWord8
-    , peekWord8
-
-    -- ** Byte classes
-    , inClass
-    , notInClass
-
-    -- * Parsing more complicated structures
-    , storable
-
-    -- * Efficient string handling
-    , skipWhile
-    , string
-    , stringTransform
-    , take
-    , scan
-    , takeWhile
-    , takeWhile1
-    , takeTill
-
-    -- ** Consume all remaining input
-    , takeByteString
-    , takeLazyByteString
-
-    -- * State observation and manipulation functions
-    , endOfInput
-    , atEnd
-
-    -- * Utilities
-    , endOfLine
-    ) where
-
-import Control.Applicative ((<|>), (<$>))
-import Control.Monad (when)
-import Data.Attoparsec.ByteString.FastSet (charClass, memberWord8)
-import Data.Attoparsec.Combinator
-import Data.Attoparsec.Internal.Types
-    hiding (Parser, Input, Added, Failure, Success)
-import Data.Monoid (Monoid(..))
-import Data.Word (Word8)
-import Foreign.ForeignPtr (withForeignPtr)
-import Foreign.Ptr (castPtr, minusPtr, plusPtr)
-import Foreign.Storable (Storable(peek, sizeOf))
-import Prelude hiding (getChar, take, takeWhile)
-import qualified Data.Attoparsec.Internal.Types as T
-import qualified Data.ByteString as B8
-import qualified Data.ByteString.Char8 as B
-import qualified Data.ByteString.Internal as B
-import qualified Data.ByteString.Lazy as L
-import qualified Data.ByteString.Unsafe as B
-
-#if defined(__GLASGOW_HASKELL__)
-import GHC.Base (realWorld#)
-import GHC.IO (IO(IO))
-#else
-import System.IO.Unsafe (unsafePerformIO)
-#endif
-
-type Parser = T.Parser B.ByteString
-type Result = IResult B.ByteString
-type Input = T.Input B.ByteString
-type Added = T.Added B.ByteString
-type Failure r = T.Failure B.ByteString r
-type Success a r = T.Success B.ByteString a r
-
-ensure' :: Int -> Input -> Added -> More -> Failure r -> Success B.ByteString r
-        -> IResult B.ByteString r
-ensure' !n0 i0 a0 m0 kf0 ks0 =
-    T.runParser (demandInput >> go n0) i0 a0 m0 kf0 ks0
-  where
-    go !n = T.Parser $ \i a m kf ks ->
-        if B.length (unI i) >= n
-        then ks i a m (unI i)
-        else T.runParser (demandInput >> go n) i a m kf ks
-
--- | If at least @n@ bytes of input are available, return the current
--- input, otherwise fail.
-ensure :: Int -> Parser B.ByteString
-ensure !n = T.Parser $ \i0 a0 m0 kf ks ->
-    if B.length (unI i0) >= n
-    then ks i0 a0 m0 (unI i0)
-    -- The uncommon case is kept out-of-line to reduce code size:
-    else ensure' n i0 a0 m0 kf ks
--- Non-recursive so the bounds check can be inlined:
-{-# INLINE ensure #-}
-
--- | Ask for input.  If we receive any, pass it to a success
--- continuation, otherwise to a failure continuation.
-prompt :: Input -> Added -> More
-       -> (Input -> Added -> More -> Result r)
-       -> (Input -> Added -> More -> Result r)
-       -> Result r
-prompt i0 a0 _m0 kf ks = Partial $ \s ->
-    if B.null s
-    then kf i0 a0 Complete
-    else ks (i0 <> I s) (a0 <> A s) Incomplete
-
--- | Immediately demand more input via a 'Partial' continuation
--- result.
-demandInput :: Parser ()
-demandInput = T.Parser $ \i0 a0 m0 kf ks ->
-    if m0 == Complete
-    then kf i0 a0 m0 ["demandInput"] "not enough bytes"
-    else let kf' i a m = kf i a m ["demandInput"] "not enough bytes"
-             ks' i a m = ks i a m ()
-         in prompt i0 a0 m0 kf' ks'
-
--- | This parser always succeeds.  It returns 'True' if any input is
--- available either immediately or on demand, and 'False' if the end
--- of all input has been reached.
-wantInput :: Parser Bool
-wantInput = T.Parser $ \i0 a0 m0 _kf ks ->
-  case () of
-    _ | not (B.null (unI i0)) -> ks i0 a0 m0 True
-      | m0 == Complete  -> ks i0 a0 m0 False
-      | otherwise       -> let kf' i a m = ks i a m False
-                               ks' i a m = ks i a m True
-                           in prompt i0 a0 m0 kf' ks'
-
-get :: Parser B.ByteString
-get  = T.Parser $ \i0 a0 m0 _kf ks -> ks i0 a0 m0 (unI i0)
-
-put :: B.ByteString -> Parser ()
-put s = T.Parser $ \_i0 a0 m0 _kf ks -> ks (I s) a0 m0 ()
-
--- | Attempt a parse, and if it fails, rewind the input so that no
--- input appears to have been consumed.
---
--- This combinator is provided for compatibility with Parsec.
--- Attoparsec parsers always backtrack on failure.
-try :: Parser a -> Parser a
-try p = p
-{-# INLINE try #-}
-
--- | The parser @satisfy p@ succeeds for any byte for which the
--- predicate @p@ returns 'True'. Returns the byte that is actually
--- parsed.
---
--- >digit = satisfy isDigit
--- >    where isDigit w = w >= 48 && w <= 57
-satisfy :: (Word8 -> Bool) -> Parser Word8
-satisfy p = do
-  s <- ensure 1
-  let !w = B.unsafeHead s
-  if p w
-    then put (B.unsafeTail s) >> return w
-    else fail "satisfy"
-{-# INLINE satisfy #-}
-
--- | The parser @skip p@ succeeds for any byte for which the predicate
--- @p@ returns 'True'.
---
--- >skipDigit = skip isDigit
--- >    where isDigit w = w >= 48 && w <= 57
-skip :: (Word8 -> Bool) -> Parser ()
-skip p = do
-  s <- ensure 1
-  if p (B.unsafeHead s)
-    then put (B.unsafeTail s)
-    else fail "skip"
-
--- | The parser @satisfyWith f p@ transforms a byte, and succeeds if
--- the predicate @p@ returns 'True' on the transformed value. The
--- parser returns the transformed byte that was parsed.
-satisfyWith :: (Word8 -> a) -> (a -> Bool) -> Parser a
-satisfyWith f p = do
-  s <- ensure 1
-  let c = f $! B.unsafeHead s
-  if p c
-    then let !t = B.unsafeTail s
-         in put t >> return c
-    else fail "satisfyWith"
-{-# INLINE satisfyWith #-}
-
-storable :: Storable a => Parser a
-storable = hack undefined
- where
-  hack :: Storable b => b -> Parser b
-  hack dummy = do
-    (fp,o,_) <- B.toForeignPtr `fmap` take (sizeOf dummy)
-    return . B.inlinePerformIO . withForeignPtr fp $ \p ->
-        peek (castPtr $ p `plusPtr` o)
-
--- | Consume @n@ bytes of input, but succeed only if the predicate
--- returns 'True'.
-takeWith :: Int -> (B.ByteString -> Bool) -> Parser B.ByteString
-takeWith n0 p = do
-  let n = max n0 0
-  s <- ensure n
-  let h = B.unsafeTake n s
-      t = B.unsafeDrop n s
-  if p h
-    then put t >> return h
-    else fail "takeWith"
-
--- | Consume exactly @n@ bytes of input.
-take :: Int -> Parser B.ByteString
-take n = takeWith n (const True)
-{-# INLINE take #-}
-
--- | @string s@ parses a sequence of bytes that identically match
--- @s@. Returns the parsed string (i.e. @s@).  This parser consumes no
--- input if it fails (even if a partial match).
---
--- /Note/: The behaviour of this parser is different to that of the
--- similarly-named parser in Parsec, as this one is all-or-nothing.
--- To illustrate the difference, the following parser will fail under
--- Parsec given an input of @\"for\"@:
---
--- >string "foo" <|> string "for"
---
--- The reason for its failure is that the first branch is a
--- partial match, and will consume the letters @\'f\'@ and @\'o\'@
--- before failing.  In Attoparsec, the above parser will /succeed/ on
--- that input, because the failed first branch will consume nothing.
-string :: B.ByteString -> Parser B.ByteString
-string s = takeWith (B.length s) (==s)
-{-# INLINE string #-}
-
-stringTransform :: (B.ByteString -> B.ByteString) -> B.ByteString
-                -> Parser B.ByteString
-stringTransform f s = takeWith (B.length s) ((==f s) . f)
-{-# INLINE stringTransform #-}
-
--- | Skip past input for as long as the predicate returns 'True'.
-skipWhile :: (Word8 -> Bool) -> Parser ()
-skipWhile p = go
- where
-  go = do
-    t <- B8.dropWhile p <$> get
-    put t
-    when (B.null t) $ do
-      input <- wantInput
-      when input go
-{-# INLINE skipWhile #-}
-
--- | Consume input as long as the predicate returns 'False'
--- (i.e. until it returns 'True'), and return the consumed input.
---
--- This parser does not fail.  It will return an empty string if the
--- predicate returns 'True' on the first byte of input.
---
--- /Note/: Because this parser does not fail, do not use it with
--- combinators such as 'many', because such parsers loop until a
--- failure occurs.  Careless use will thus result in an infinite loop.
-takeTill :: (Word8 -> Bool) -> Parser B.ByteString
-takeTill p = takeWhile (not . p)
-{-# INLINE takeTill #-}
-
--- | Consume input as long as the predicate returns 'True', and return
--- the consumed input.
---
--- This parser does not fail.  It will return an empty string if the
--- predicate returns 'False' on the first byte of input.
---
--- /Note/: Because this parser does not fail, do not use it with
--- combinators such as 'many', because such parsers loop until a
--- failure occurs.  Careless use will thus result in an infinite loop.
-takeWhile :: (Word8 -> Bool) -> Parser B.ByteString
-takeWhile p = (B.concat . reverse) `fmap` go []
- where
-  go acc = do
-    (h,t) <- B8.span p <$> get
-    put t
-    if B.null t
-      then do
-        input <- wantInput
-        if input
-          then go (h:acc)
-          else return (h:acc)
-      else return (h:acc)
-{-# INLINE takeWhile #-}
-
-takeRest :: Parser [B.ByteString]
-takeRest = go []
- where
-  go acc = do
-    input <- wantInput
-    if input
-      then do
-        s <- get
-        put B.empty
-        go (s:acc)
-      else return (reverse acc)
-
--- | Consume all remaining input and return it as a single string.
-takeByteString :: Parser B.ByteString
-takeByteString = B.concat `fmap` takeRest
-
--- | Consume all remaining input and return it as a single string.
-takeLazyByteString :: Parser L.ByteString
-takeLazyByteString = L.fromChunks `fmap` takeRest
-
-data T s = T {-# UNPACK #-} !Int s
-
--- | A stateful scanner.  The predicate consumes and transforms a
--- state argument, and each transformed state is passed to successive
--- invocations of the predicate on each byte of the input until one
--- returns 'Nothing' or the input ends.
---
--- This parser does not fail.  It will return an empty string if the
--- predicate returns 'Nothing' on the first byte of input.
---
--- /Note/: Because this parser does not fail, do not use it with
--- combinators such as 'many', because such parsers loop until a
--- failure occurs.  Careless use will thus result in an infinite loop.
-scan :: s -> (s -> Word8 -> Maybe s) -> Parser B.ByteString
-scan s0 p = do
-  chunks <- go [] s0
-  case chunks of
-    [x] -> return x
-    xs  -> return $! B.concat $ reverse xs
- where
-  go acc s1 = do
-    let scanner (B.PS fp off len) =
-          withForeignPtr fp $ \ptr0 -> do
-            let start = ptr0 `plusPtr` off
-                end   = start `plusPtr` len
-                inner ptr !s
-                  | ptr < end = do
-                    w <- peek ptr
-                    case p s w of
-                      Just s' -> inner (ptr `plusPtr` 1) s'
-                      _       -> done (ptr `minusPtr` start) s
-                  | otherwise = done (ptr `minusPtr` start) s
-                done !i !s = return (T i s)
-            inner start s1
-    bs <- get
-    let T i s' = inlinePerformIO $ scanner bs
-        !h = B.unsafeTake i bs
-        !t = B.unsafeDrop i bs
-    put t
-    if B.null t
-      then do
-        input <- wantInput
-        if input
-          then go (h:acc) s'
-          else return (h:acc)
-      else return (h:acc)
-{-# INLINE scan #-}
-
--- | Consume input as long as the predicate returns 'True', and return
--- the consumed input.
---
--- This parser requires the predicate to succeed on at least one byte
--- of input: it will fail if the predicate never returns 'True' or if
--- there is no input left.
-takeWhile1 :: (Word8 -> Bool) -> Parser B.ByteString
-takeWhile1 p = do
-  (`when` demandInput) =<< B.null <$> get
-  (h,t) <- B8.span p <$> get
-  when (B.null h) $ fail "takeWhile1"
-  put t
-  if B.null t
-    then (h<>) `fmap` takeWhile p
-    else return h
-
--- | Match any byte in a set.
---
--- >vowel = inClass "aeiou"
---
--- Range notation is supported.
---
--- >halfAlphabet = inClass "a-nA-N"
---
--- To add a literal @\'-\'@ to a set, place it at the beginning or end
--- of the string.
-inClass :: String -> Word8 -> Bool
-inClass s = (`memberWord8` mySet)
-    where mySet = charClass s
-          {-# NOINLINE mySet #-}
-{-# INLINE inClass #-}
-
--- | Match any byte not in a set.
-notInClass :: String -> Word8 -> Bool
-notInClass s = not . inClass s
-{-# INLINE notInClass #-}
-
--- | Match any byte.
-anyWord8 :: Parser Word8
-anyWord8 = satisfy $ const True
-{-# INLINE anyWord8 #-}
-
--- | Match a specific byte.
-word8 :: Word8 -> Parser Word8
-word8 c = satisfy (== c) <?> show c
-{-# INLINE word8 #-}
-
--- | Match any byte except the given one.
-notWord8 :: Word8 -> Parser Word8
-notWord8 c = satisfy (/= c) <?> "not " ++ show c
-{-# INLINE notWord8 #-}
-
--- | Match any byte. Returns 'Nothing' if end of input has been
--- reached. Does not consume any input.
---
--- /Note/: Because this parser does not fail, do not use it with
--- combinators such as 'many', because such parsers loop until a
--- failure occurs.  Careless use will thus result in an infinite loop.
-peekWord8 :: Parser (Maybe Word8)
-peekWord8 = T.Parser $ \i0 a0 m0 _kf ks ->
-            if B.null (unI i0)
-            then if m0 == Complete
-                 then ks i0 a0 m0 Nothing
-                 else let ks' i a m = let !w = B.unsafeHead (unI i)
-                                      in ks i a m (Just w)
-                          kf' i a m = ks i a m Nothing
-                      in prompt i0 a0 m0 kf' ks'
-            else let !w = B.unsafeHead (unI i0)
-                 in ks i0 a0 m0 (Just w)
-{-# INLINE peekWord8 #-}
-
--- | Match only if all input has been consumed.
-endOfInput :: Parser ()
-endOfInput = T.Parser $ \i0 a0 m0 kf ks ->
-             if B.null (unI i0)
-             then if m0 == Complete
-                  then ks i0 a0 m0 ()
-                  else let kf' i1 a1 m1 _ _ = addS i0 a0 m0 i1 a1 m1 $
-                                              \ i2 a2 m2 -> ks i2 a2 m2 ()
-                           ks' i1 a1 m1 _   = addS i0 a0 m0 i1 a1 m1 $
-                                              \ i2 a2 m2 -> kf i2 a2 m2 []
-                                                            "endOfInput"
-                       in  T.runParser demandInput i0 a0 m0 kf' ks'
-             else kf i0 a0 m0 [] "endOfInput"
-
--- | Return an indication of whether the end of input has been
--- reached.
-atEnd :: Parser Bool
-atEnd = not <$> wantInput
-{-# INLINE atEnd #-}
-
--- | Match either a single newline character @\'\\n\'@, or a carriage
--- return followed by a newline character @\"\\r\\n\"@.
-endOfLine :: Parser ()
-endOfLine = (word8 10 >> return ()) <|> (string "\r\n" >> return ())
-
--- | Name the parser, in case failure occurs.
-(<?>) :: Parser a
-      -> String                 -- ^ the name to use if parsing fails
-      -> Parser a
-p <?> msg0 = T.Parser $ \i0 a0 m0 kf ks ->
-             let kf' i a m strs msg = kf i a m (msg0:strs) msg
-             in T.runParser p i0 a0 m0 kf' ks
-{-# INLINE (<?>) #-}
-infix 0 <?>
-
--- | Terminal failure continuation.
-failK :: Failure a
-failK i0 _a0 _m0 stack msg = Fail (unI i0) stack msg
-{-# INLINE failK #-}
-
--- | Terminal success continuation.
-successK :: Success a a
-successK i0 _a0 _m0 a = Done (unI i0) a
-{-# INLINE successK #-}
-
--- | Run a parser.
-parse :: Parser a -> B.ByteString -> Result a
-parse m s = T.runParser m (I s) mempty Incomplete failK successK
-{-# INLINE parse #-}
-
--- | Run a parser that cannot be resupplied via a 'Partial' result.
-parseOnly :: Parser a -> B.ByteString -> Either String a
-parseOnly m s = case T.runParser m (I s) mempty Complete failK successK of
-                  Fail _ _ err -> Left err
-                  Done _ a     -> Right a
-                  _            -> error "parseOnly: impossible error!"
-{-# INLINE parseOnly #-}
-
--- | Just like unsafePerformIO, but we inline it. Big performance gains as
--- it exposes lots of things to further inlining. /Very unsafe/. In
--- particular, you should do no memory allocation inside an
--- 'inlinePerformIO' block. On Hugs this is just @unsafePerformIO@.
-inlinePerformIO :: IO a -> a
-#if defined(__GLASGOW_HASKELL__)
-inlinePerformIO (IO m) = case m realWorld# of (# _, r #) -> r
-#else
-inlinePerformIO = unsafePerformIO
-#endif
-{-# INLINE inlinePerformIO #-}
diff --git a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/Combinator.hs b/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/Combinator.hs
deleted file mode 100644
index cb9cee83..00000000
--- a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/Combinator.hs
+++ /dev/null
@@ -1,205 +0,0 @@
-{-# LANGUAGE BangPatterns, CPP #-}
--- |
--- Module      :  Data.Attoparsec.Combinator
--- Copyright   :  Daan Leijen 1999-2001, Bryan O'Sullivan 2009-2010
--- License     :  BSD3
---
--- Maintainer  :  bos@serpentine.com
--- Stability   :  experimental
--- Portability :  portable
---
--- Useful parser combinators, similar to those provided by Parsec.
-module Data.Attoparsec.Combinator
-    (
-      choice
-    , count
-    , option
-    , many'
-    , many1
-    , many1'
-    , manyTill
-    , manyTill'
-    , sepBy
-    , sepBy'
-    , sepBy1
-    , sepBy1'
-    , skipMany
-    , skipMany1
-    , eitherP
-    ) where
-
-import Control.Applicative (Alternative(..), Applicative(..), empty, liftA2,
-                            (<|>), (*>), (<$>))
-import Control.Monad (MonadPlus(..))
-#if !MIN_VERSION_base(4,2,0)
-import Control.Applicative (many)
-#endif
-
-#if __GLASGOW_HASKELL__ >= 700
-import Data.Attoparsec.Internal.Types (Parser)
-import Data.ByteString (ByteString)
-#endif
-
--- | @choice ps@ tries to apply the actions in the list @ps@ in order,
--- until one of them succeeds. Returns the value of the succeeding
--- action.
-choice :: Alternative f => [f a] -> f a
-choice = foldr (<|>) empty
-#if __GLASGOW_HASKELL__ >= 700
-{-# SPECIALIZE choice :: [Parser ByteString a] -> Parser ByteString a #-}
-#endif
-
--- | @option x p@ tries to apply action @p@. If @p@ fails without
--- consuming input, it returns the value @x@, otherwise the value
--- returned by @p@.
---
--- > priority  = option 0 (digitToInt <$> digit)
-option :: Alternative f => a -> f a -> f a
-option x p = p <|> pure x
-#if __GLASGOW_HASKELL__ >= 700
-{-# SPECIALIZE option :: a -> Parser ByteString a -> Parser ByteString a #-}
-#endif
-
--- | A version of 'liftM2' that is strict in the result of its first
--- action.
-liftM2' :: (Monad m) => (a -> b -> c) -> m a -> m b -> m c
-liftM2' f a b = do
-  !x <- a
-  y <- b
-  return (f x y)
-{-# INLINE liftM2' #-}
-
--- | @many' p@ applies the action @p@ /zero/ or more times. Returns a
--- list of the returned values of @p@. The value returned by @p@ is
--- forced to WHNF.
---
--- >  word  = many' letter
-many' :: (MonadPlus m) => m a -> m [a]
-many' p = many_p
-  where many_p = some_p `mplus` return []
-        some_p = liftM2' (:) p many_p
-{-# INLINE many' #-}
-
--- | @many1 p@ applies the action @p@ /one/ or more times. Returns a
--- list of the returned values of @p@.
---
--- >  word  = many1 letter
-many1 :: Alternative f => f a -> f [a]
-many1 p = liftA2 (:) p (many p)
-{-# INLINE many1 #-}
-
--- | @many1' p@ applies the action @p@ /one/ or more times. Returns a
--- list of the returned values of @p@. The value returned by @p@ is
--- forced to WHNF.
---
--- >  word  = many1' letter
-many1' :: (MonadPlus m) => m a -> m [a]
-many1' p = liftM2' (:) p (many' p)
-{-# INLINE many1' #-}
-
--- | @sepBy p sep@ applies /zero/ or more occurrences of @p@, separated
--- by @sep@. Returns a list of the values returned by @p@.
---
--- > commaSep p  = p `sepBy` (symbol ",")
-sepBy :: Alternative f => f a -> f s -> f [a]
-sepBy p s = liftA2 (:) p ((s *> sepBy1 p s) <|> pure []) <|> pure []
-#if __GLASGOW_HASKELL__ >= 700
-{-# SPECIALIZE sepBy :: Parser ByteString a -> Parser ByteString s
-                     -> Parser ByteString [a] #-}
-#endif
-
--- | @sepBy' p sep@ applies /zero/ or more occurrences of @p@, separated
--- by @sep@. Returns a list of the values returned by @p@. The value
--- returned by @p@ is forced to WHNF.
---
--- > commaSep p  = p `sepBy'` (symbol ",")
-sepBy' :: (MonadPlus m) => m a -> m s -> m [a]
-sepBy' p s = scan `mplus` return []
-  where scan = liftM2' (:) p ((s >> sepBy1' p s) `mplus` return [])
-#if __GLASGOW_HASKELL__ >= 700
-{-# SPECIALIZE sepBy' :: Parser ByteString a -> Parser ByteString s
-                      -> Parser ByteString [a] #-}
-#endif
-
--- | @sepBy1 p sep@ applies /one/ or more occurrences of @p@, separated
--- by @sep@. Returns a list of the values returned by @p@.
---
--- > commaSep p  = p `sepBy1` (symbol ",")
-sepBy1 :: Alternative f => f a -> f s -> f [a]
-sepBy1 p s = scan
-    where scan = liftA2 (:) p ((s *> scan) <|> pure [])
-#if __GLASGOW_HASKELL__ >= 700
-{-# SPECIALIZE sepBy1 :: Parser ByteString a -> Parser ByteString s
-                      -> Parser ByteString [a] #-}
-#endif
-
--- | @sepBy1' p sep@ applies /one/ or more occurrences of @p@, separated
--- by @sep@. Returns a list of the values returned by @p@. The value
--- returned by @p@ is forced to WHNF.
---
--- > commaSep p  = p `sepBy1'` (symbol ",")
-sepBy1' :: (MonadPlus m) => m a -> m s -> m [a]
-sepBy1' p s = scan
-    where scan = liftM2' (:) p ((s >> scan) `mplus` return [])
-#if __GLASGOW_HASKELL__ >= 700
-{-# SPECIALIZE sepBy1' :: Parser ByteString a -> Parser ByteString s
-                       -> Parser ByteString [a] #-}
-#endif
-
--- | @manyTill p end@ applies action @p@ /zero/ or more times until
--- action @end@ succeeds, and returns the list of values returned by
--- @p@.  This can be used to scan comments:
---
--- >  simpleComment   = string "<!--" *> manyTill anyChar (try (string "-->"))
---
--- Note the overlapping parsers @anyChar@ and @string \"<!--\"@, and
--- therefore the use of the 'try' combinator.
-manyTill :: Alternative f => f a -> f b -> f [a]
-manyTill p end = scan
-    where scan = (end *> pure []) <|> liftA2 (:) p scan
-#if __GLASGOW_HASKELL__ >= 700
-{-# SPECIALIZE manyTill :: Parser ByteString a -> Parser ByteString b
-                        -> Parser ByteString [a] #-}
-#endif
-
--- | @manyTill' p end@ applies action @p@ /zero/ or more times until
--- action @end@ succeeds, and returns the list of values returned by
--- @p@.  This can be used to scan comments:
---
--- >  simpleComment   = string "<!--" *> manyTill' anyChar (try (string "-->"))
---
--- Note the overlapping parsers @anyChar@ and @string \"<!--\"@, and
--- therefore the use of the 'try' combinator. The value returned by @p@
--- is forced to WHNF.
-manyTill' :: (MonadPlus m) => m a -> m b -> m [a]
-manyTill' p end = scan
-    where scan = (end >> return []) `mplus` liftM2' (:) p scan
-#if __GLASGOW_HASKELL__ >= 700
-{-# SPECIALIZE manyTill' :: Parser ByteString a -> Parser ByteString b
-                         -> Parser ByteString [a] #-}
-#endif
-
--- | Skip zero or more instances of an action.
-skipMany :: Alternative f => f a -> f ()
-skipMany p = scan
-    where scan = (p *> scan) <|> pure ()
-#if __GLASGOW_HASKELL__ >= 700
-{-# SPECIALIZE skipMany :: Parser ByteString a -> Parser ByteString () #-}
-#endif
-
--- | Skip one or more instances of an action.
-skipMany1 :: Alternative f => f a -> f ()
-skipMany1 p = p *> skipMany p
-#if __GLASGOW_HASKELL__ >= 700
-{-# SPECIALIZE skipMany1 :: Parser ByteString a -> Parser ByteString () #-}
-#endif
-
--- | Apply the given action repeatedly, returning every result.
-count :: Monad m => Int -> m a -> m [a]
-count n p = sequence (replicate n p)
-{-# INLINE count #-}
-
--- | Combine two alternatives.
-eitherP :: (Alternative f) => f a -> f b -> f (Either a b)
-eitherP a b = (Left <$> a) <|> (Right <$> b)
-{-# INLINE eitherP #-}
diff --git a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/Internal.hs b/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/Internal.hs
deleted file mode 100644
index 0572d682..00000000
--- a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/Internal.hs
+++ /dev/null
@@ -1,31 +0,0 @@
--- |
--- Module      :  Data.Attoparsec.Internal
--- Copyright   :  Bryan O'Sullivan 2012
--- License     :  BSD3
---
--- Maintainer  :  bos@serpentine.com
--- Stability   :  experimental
--- Portability :  unknown
---
--- Simple, efficient parser combinators, loosely based on the Parsec
--- library.
-
-module Data.Attoparsec.Internal
-    (
-      compareResults
-    ) where
-
-import Data.Attoparsec.Internal.Types (IResult(..))
-
--- | Compare two 'IResult' values for equality.
---
--- If both 'IResult's are 'Partial', the result will be 'Nothing', as
--- they are incomplete and hence their equality cannot be known.
--- (This is why there is no 'Eq' instance for 'IResult'.)
-compareResults :: (Eq t, Eq r) => IResult t r -> IResult t r -> Maybe Bool
-compareResults (Fail i0 ctxs0 msg0) (Fail i1 ctxs1 msg1) =
-    Just (i0 == i1 && ctxs0 == ctxs1 && msg0 == msg1)
-compareResults (Done i0 r0) (Done i1 r1) =
-    Just (i0 == i1 && r0 == r1)
-compareResults (Partial _) (Partial _) = Nothing
-compareResults _ _ = Just False
diff --git a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/Internal/Types.hs b/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/Internal/Types.hs
deleted file mode 100644
index e47e5c9e..00000000
--- a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/Internal/Types.hs
+++ /dev/null
@@ -1,227 +0,0 @@
-{-# LANGUAGE BangPatterns, CPP, GeneralizedNewtypeDeriving, OverloadedStrings,
-    Rank2Types, RecordWildCards #-}
--- |
--- Module      :  Data.Attoparsec.Internal.Types
--- Copyright   :  Bryan O'Sullivan 2007-2011
--- License     :  BSD3
---
--- Maintainer  :  bos@serpentine.com
--- Stability   :  experimental
--- Portability :  unknown
---
--- Simple, efficient parser combinators, loosely based on the Parsec
--- library.
-
-module Data.Attoparsec.Internal.Types
-    (
-      Parser(..)
-    , Failure
-    , Success
-    , IResult(..)
-    , Input(..)
-    , Added(..)
-    , More(..)
-    , addS
-    , (<>)
-    ) where
-
-import Control.Applicative (Alternative(..), Applicative(..), (<$>))
-import Control.DeepSeq (NFData(rnf))
-import Control.Monad (MonadPlus(..))
-import Data.Monoid (Monoid(..))
-import Prelude hiding (getChar, take, takeWhile)
-
--- | The result of a parse.  This is parameterised over the type @t@
--- of string that was processed.
---
--- This type is an instance of 'Functor', where 'fmap' transforms the
--- value in a 'Done' result.
-data IResult t r = Fail t [String] String
-                 -- ^ The parse failed.  The 't' parameter is the
-                 -- input that had not yet been consumed when the
-                 -- failure occurred.  The @[@'String'@]@ is a list of
-                 -- contexts in which the error occurred.  The
-                 -- 'String' is the message describing the error, if
-                 -- any.
-                 | Partial (t -> IResult t r)
-                 -- ^ Supply this continuation with more input so that
-                 -- the parser can resume.  To indicate that no more
-                 -- input is available, use an empty string.
-                 | Done t r
-                 -- ^ The parse succeeded.  The 't' parameter is the
-                 -- input that had not yet been consumed (if any) when
-                 -- the parse succeeded.
-
-instance (Show t, Show r) => Show (IResult t r) where
-    show (Fail t stk msg) =
-        "Fail " ++ show t ++ " " ++ show stk ++ " " ++ show msg
-    show (Partial _)      = "Partial _"
-    show (Done t r)       = "Done " ++ show t ++ " " ++ show r
-
-instance (NFData t, NFData r) => NFData (IResult t r) where
-    rnf (Fail t stk msg) = rnf t `seq` rnf stk `seq` rnf msg
-    rnf (Partial _)  = ()
-    rnf (Done t r)   = rnf t `seq` rnf r
-    {-# INLINE rnf #-}
-
-fmapR :: (a -> b) -> IResult t a -> IResult t b
-fmapR _ (Fail t stk msg) = Fail t stk msg
-fmapR f (Partial k)       = Partial (fmapR f . k)
-fmapR f (Done t r)       = Done t (f r)
-
-instance Functor (IResult t) where
-    fmap = fmapR
-    {-# INLINE fmap #-}
-
-newtype Input t = I {unI :: t} deriving (Monoid)
-newtype Added t = A {unA :: t} deriving (Monoid)
-
--- | The core parser type.  This is parameterised over the type @t@ of
--- string being processed.
---
--- This type is an instance of the following classes:
---
--- * 'Monad', where 'fail' throws an exception (i.e. fails) with an
---   error message.
---
--- * 'Functor' and 'Applicative', which follow the usual definitions.
---
--- * 'MonadPlus', where 'mzero' fails (with no error message) and
---   'mplus' executes the right-hand parser if the left-hand one
---   fails.  When the parser on the right executes, the input is reset
---   to the same state as the parser on the left started with. (In
---   other words, Attoparsec is a backtracking parser that supports
---   arbitrary lookahead.)
---
--- * 'Alternative', which follows 'MonadPlus'.
-newtype Parser t a = Parser {
-      runParser :: forall r. Input t -> Added t -> More
-                -> Failure t   r
-                -> Success t a r
-                -> IResult t r
-    }
-
-type Failure t   r = Input t -> Added t -> More -> [String] -> String
-                   -> IResult t r
-type Success t a r = Input t -> Added t -> More -> a -> IResult t r
-
--- | Have we read all available input?
-data More = Complete | Incomplete
-            deriving (Eq, Show)
-
-instance Monoid More where
-    mappend c@Complete _ = c
-    mappend _ m          = m
-    mempty               = Incomplete
-
-addS :: (Monoid t) =>
-        Input t -> Added t -> More
-     -> Input t -> Added t -> More
-     -> (Input t -> Added t -> More -> r) -> r
-addS i0 a0 m0 _i1 a1 m1 f =
-    let !i = i0 <> I (unA a1)
-        a  = a0 <> a1
-        !m = m0 <> m1
-    in f i a m
-{-# INLINE addS #-}
-
-bindP :: Parser t a -> (a -> Parser t b) -> Parser t b
-bindP m g =
-    Parser $ \i0 a0 m0 kf ks -> runParser m i0 a0 m0 kf $
-                                \i1 a1 m1 a -> runParser (g a) i1 a1 m1 kf ks
-{-# INLINE bindP #-}
-
-returnP :: a -> Parser t a
-returnP a = Parser (\i0 a0 m0 _kf ks -> ks i0 a0 m0 a)
-{-# INLINE returnP #-}
-
-instance Monad (Parser t) where
-    return = returnP
-    (>>=)  = bindP
-    fail   = failDesc
-
-noAdds :: (Monoid t) =>
-          Input t -> Added t -> More
-       -> (Input t -> Added t -> More -> r) -> r
-noAdds i0 _a0 m0 f = f i0 mempty m0
-{-# INLINE noAdds #-}
-
-plus :: (Monoid t) => Parser t a -> Parser t a -> Parser t a
-plus a b = Parser $ \i0 a0 m0 kf ks ->
-           let kf' i1 a1 m1 _ _ = addS i0 a0 m0 i1 a1 m1 $
-                                  \ i2 a2 m2 -> runParser b i2 a2 m2 kf ks
-               ks' i1 a1 m1 = ks i1 (a0 <> a1) m1
-           in  noAdds i0 a0 m0 $ \i2 a2 m2 -> runParser a i2 a2 m2 kf' ks'
-{-# INLINE plus #-}
-
-instance (Monoid t) => MonadPlus (Parser t) where
-    mzero = failDesc "mzero"
-    {-# INLINE mzero #-}
-    mplus = plus
-
-fmapP :: (a -> b) -> Parser t a -> Parser t b
-fmapP p m = Parser $ \i0 a0 m0 f k ->
-            runParser m i0 a0 m0 f $ \i1 a1 s1 a -> k i1 a1 s1 (p a)
-{-# INLINE fmapP #-}
-
-instance Functor (Parser t) where
-    fmap = fmapP
-    {-# INLINE fmap #-}
-
-apP :: Parser t (a -> b) -> Parser t a -> Parser t b
-apP d e = do
-  b <- d
-  a <- e
-  return (b a)
-{-# INLINE apP #-}
-
-instance Applicative (Parser t) where
-    pure   = returnP
-    {-# INLINE pure #-}
-    (<*>)  = apP
-    {-# INLINE (<*>) #-}
-
-#if MIN_VERSION_base(4,2,0)
-    -- These definitions are equal to the defaults, but this
-    -- way the optimizer doesn't have to work so hard to figure
-    -- that out.
-    (*>)   = (>>)
-    {-# INLINE (*>) #-}
-    x <* y = x >>= \a -> y >> return a
-    {-# INLINE (<*) #-}
-#endif
-
-instance (Monoid t) => Monoid (Parser t a) where
-    mempty  = failDesc "mempty"
-    {-# INLINE mempty #-}
-    mappend = plus
-    {-# INLINE mappend #-}
-
-instance (Monoid t) => Alternative (Parser t) where
-    empty = failDesc "empty"
-    {-# INLINE empty #-}
-
-    (<|>) = plus
-    {-# INLINE (<|>) #-}
-
-#if MIN_VERSION_base(4,2,0)
-    many v = many_v
-        where many_v = some_v <|> pure []
-              some_v = (:) <$> v <*> many_v
-    {-# INLINE many #-}
-
-    some v = some_v
-      where
-        many_v = some_v <|> pure []
-        some_v = (:) <$> v <*> many_v
-    {-# INLINE some #-}
-#endif
-
-failDesc :: String -> Parser t a
-failDesc err = Parser (\i0 a0 m0 kf _ks -> kf i0 a0 m0 [] msg)
-    where msg = "Failed reading: " ++ err
-{-# INLINE failDesc #-}
-
-(<>) :: (Monoid m) => m -> m -> m
-(<>) = mappend
-{-# INLINE (<>) #-}
diff --git a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/Number.hs b/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/Number.hs
deleted file mode 100644
index bf175f4b..00000000
--- a/haddock-library/vendor/attoparsec-0.10.4.0/Data/Attoparsec/Number.hs
+++ /dev/null
@@ -1,127 +0,0 @@
-{-# LANGUAGE DeriveDataTypeable #-}
--- |
--- Module      :  Data.Attoparsec.Number
--- Copyright   :  Bryan O'Sullivan 2011
--- License     :  BSD3
---
--- Maintainer  :  bos@serpentine.com
--- Stability   :  experimental
--- Portability :  unknown
---
--- A simple number type, useful for parsing both exact and inexact
--- quantities without losing much precision.
-module Data.Attoparsec.Number
-    (
-      Number(..)
-    ) where
-
-import Control.DeepSeq (NFData(rnf))
-import Data.Data (Data)
-import Data.Function (on)
-import Data.Typeable (Typeable)
-
--- | A numeric type that can represent integers accurately, and
--- floating point numbers to the precision of a 'Double'.
-data Number = I !Integer
-            | D {-# UNPACK #-} !Double
-              deriving (Typeable, Data)
-
-instance Show Number where
-    show (I a) = show a
-    show (D a) = show a
-
-instance NFData Number where
-    rnf (I _) = ()
-    rnf (D _) = ()
-    {-# INLINE rnf #-}
-
-binop :: (Integer -> Integer -> a) -> (Double -> Double -> a)
-      -> Number -> Number -> a
-binop _ d (D a) (D b) = d a b
-binop i _ (I a) (I b) = i a b
-binop _ d (D a) (I b) = d a (fromIntegral b)
-binop _ d (I a) (D b) = d (fromIntegral a) b
-{-# INLINE binop #-}
-
-instance Eq Number where
-    (==) = binop (==) (==)
-    {-# INLINE (==) #-}
-
-    (/=) = binop (/=) (/=)
-    {-# INLINE (/=) #-}
-
-instance Ord Number where
-    (<) = binop (<) (<)
-    {-# INLINE (<) #-}
-
-    (<=) = binop (<=) (<=)
-    {-# INLINE (<=) #-}
-
-    (>) = binop (>) (>)
-    {-# INLINE (>) #-}
-
-    (>=) = binop (>=) (>=)
-    {-# INLINE (>=) #-}
-
-    compare = binop compare compare
-    {-# INLINE compare #-}
-
-instance Num Number where
-    (+) = binop (((I$!).) . (+)) (((D$!).) . (+))
-    {-# INLINE (+) #-}
-
-    (-) = binop (((I$!).) . (-)) (((D$!).) . (-))
-    {-# INLINE (-) #-}
-
-    (*) = binop (((I$!).) . (*)) (((D$!).) . (*))
-    {-# INLINE (*) #-}
-
-    abs (I a) = I $! abs a
-    abs (D a) = D $! abs a
-    {-# INLINE abs #-}
-
-    negate (I a) = I $! negate a
-    negate (D a) = D $! negate a
-    {-# INLINE negate #-}
-
-    signum (I a) = I $! signum a
-    signum (D a) = D $! signum a
-    {-# INLINE signum #-}
-
-    fromInteger = (I$!) . fromInteger
-    {-# INLINE fromInteger #-}
-
-instance Real Number where
-    toRational (I a) = fromIntegral a
-    toRational (D a) = toRational a
-    {-# INLINE toRational #-}
-
-instance Fractional Number where
-    fromRational = (D$!) . fromRational
-    {-# INLINE fromRational #-}
-
-    (/) = binop (((D$!).) . (/) `on` fromIntegral)
-                (((D$!).) . (/))
-    {-# INLINE (/) #-}
-
-    recip (I a) = D $! recip (fromIntegral a)
-    recip (D a) = D $! recip a
-    {-# INLINE recip #-}
-
-instance RealFrac Number where
-    properFraction (I a) = (fromIntegral a,0)
-    properFraction (D a) = case properFraction a of
-                             (i,d) -> (i,D d)
-    {-# INLINE properFraction #-}
-    truncate (I a) = fromIntegral a
-    truncate (D a) = truncate a
-    {-# INLINE truncate #-}
-    round (I a) = fromIntegral a
-    round (D a) = round a
-    {-# INLINE round #-}
-    ceiling (I a) = fromIntegral a
-    ceiling (D a) = ceiling a
-    {-# INLINE ceiling #-}
-    floor (I a) = fromIntegral a
-    floor (D a) = floor a
-    {-# INLINE floor #-}