Merge remote-tracking branch 'origin/master' into ghc-head

4 files changed, 1271 insertions, 0 deletions

diff --git a/haddock-library/vendor/attoparsec-0.13.1.0/Data/Attoparsec/ByteString/Buffer.hs b/haddock-library/vendor/attoparsec-0.13.1.0/Data/Attoparsec/ByteString/Buffer.hs
new file mode 100644
index 00000000..ac94dfcc
--- /dev/null
+++ b/haddock-library/vendor/attoparsec-0.13.1.0/Data/Attoparsec/ByteString/Buffer.hs
@@ -0,0 +1,156 @@
+{-# LANGUAGE BangPatterns #-}
+-- |
+-- Module      :  Data.Attoparsec.ByteString.Buffer
+-- Copyright   :  Bryan O'Sullivan 2007-2015
+-- License     :  BSD3
+--
+-- Maintainer  :  bos@serpentine.com
+-- Stability   :  experimental
+-- Portability :  GHC
+--
+-- An "immutable" buffer that supports cheap appends.
+--
+-- A Buffer is divided into an immutable read-only zone, followed by a
+-- mutable area that we've preallocated, but not yet written to.
+--
+-- We overallocate at the end of a Buffer so that we can cheaply
+-- append.  Since a user of an existing Buffer cannot see past the end
+-- of its immutable zone into the data that will change during an
+-- append, this is safe.
+--
+-- Once we run out of space at the end of a Buffer, we do the usual
+-- doubling of the buffer size.
+--
+-- The fact of having a mutable buffer really helps with performance,
+-- but it does have a consequence: if someone misuses the Partial API
+-- that attoparsec uses by calling the same continuation repeatedly
+-- (which never makes sense in practice), they could overwrite data.
+--
+-- Since the API *looks* pure, it should *act* pure, too, so we use
+-- two generation counters (one mutable, one immutable) to track the
+-- number of appends to a mutable buffer. If the counters ever get out
+-- of sync, someone is appending twice to a mutable buffer, so we
+-- duplicate the entire buffer in order to preserve the immutability
+-- of its older self.
+--
+-- While we could go a step further and gain protection against API
+-- abuse on a multicore system, by use of an atomic increment
+-- instruction to bump the mutable generation counter, that would be
+-- very expensive, and feels like it would also be in the realm of the
+-- ridiculous.  Clients should never call a continuation more than
+-- once; we lack a linear type system that could enforce this; and
+-- there's only so far we should go to accommodate broken uses.
+
+module Data.Attoparsec.ByteString.Buffer
+    (
+      Buffer
+    , buffer
+    , unbuffer
+    , pappend
+    , length
+    , unsafeIndex
+    , substring
+    , unsafeDrop
+    ) where
+
+import Control.Exception (assert)
+import Data.ByteString.Internal (ByteString(..), memcpy, nullForeignPtr)
+import Data.Attoparsec.Internal.Fhthagn (inlinePerformIO)
+import Data.List (foldl1')
+import Data.Monoid as Mon (Monoid(..))
+import Data.Semigroup (Semigroup(..))
+import Data.Word (Word8)
+import Foreign.ForeignPtr (ForeignPtr, withForeignPtr)
+import Foreign.Ptr (castPtr, plusPtr)
+import Foreign.Storable (peek, peekByteOff, poke, sizeOf)
+import GHC.ForeignPtr (mallocPlainForeignPtrBytes)
+import Prelude hiding (length)
+
+-- If _cap is zero, this buffer is empty.
+data Buffer = Buf {
+      _fp  :: {-# UNPACK #-} !(ForeignPtr Word8)
+    , _off :: {-# UNPACK #-} !Int
+    , _len :: {-# UNPACK #-} !Int
+    , _cap :: {-# UNPACK #-} !Int
+    , _gen :: {-# UNPACK #-} !Int
+    }
+
+instance Show Buffer where
+    showsPrec p = showsPrec p . unbuffer
+
+-- | The initial 'Buffer' has no mutable zone, so we can avoid all
+-- copies in the (hopefully) common case of no further input being fed
+-- to us.
+buffer :: ByteString -> Buffer
+buffer (PS fp off len) = Buf fp off len len 0
+
+unbuffer :: Buffer -> ByteString
+unbuffer (Buf fp off len _ _) = PS fp off len
+
+instance Semigroup Buffer where
+    (Buf _ _ _ 0 _) <> b                    = b
+    a               <> (Buf _ _ _ 0 _)      = a
+    buf             <> (Buf fp off len _ _) = append buf fp off len
+
+instance Monoid Buffer where
+    mempty = Buf nullForeignPtr 0 0 0 0
+
+    mappend = (<>)
+
+    mconcat [] = Mon.mempty
+    mconcat xs = foldl1' mappend xs
+
+pappend :: Buffer -> ByteString -> Buffer
+pappend (Buf _ _ _ 0 _) bs  = buffer bs
+pappend buf (PS fp off len) = append buf fp off len
+
+append :: Buffer -> ForeignPtr a -> Int -> Int -> Buffer
+append (Buf fp0 off0 len0 cap0 gen0) !fp1 !off1 !len1 =
+  inlinePerformIO . withForeignPtr fp0 $ \ptr0 ->
+    withForeignPtr fp1 $ \ptr1 -> do
+      let genSize = sizeOf (0::Int)
+          newlen  = len0 + len1
+      gen <- if gen0 == 0
+             then return 0
+             else peek (castPtr ptr0)
+      if gen == gen0 && newlen <= cap0
+        then do
+          let newgen = gen + 1
+          poke (castPtr ptr0) newgen
+          memcpy (ptr0 `plusPtr` (off0+len0))
+                 (ptr1 `plusPtr` off1)
+                 (fromIntegral len1)
+          return (Buf fp0 off0 newlen cap0 newgen)
+        else do
+          let newcap = newlen * 2
+          fp <- mallocPlainForeignPtrBytes (newcap + genSize)
+          withForeignPtr fp $ \ptr_ -> do
+            let ptr    = ptr_ `plusPtr` genSize
+                newgen = 1
+            poke (castPtr ptr_) newgen
+            memcpy ptr (ptr0 `plusPtr` off0) (fromIntegral len0)
+            memcpy (ptr `plusPtr` len0) (ptr1 `plusPtr` off1)
+                   (fromIntegral len1)
+            return (Buf fp genSize newlen newcap newgen)
+
+length :: Buffer -> Int
+length (Buf _ _ len _ _) = len
+{-# INLINE length #-}
+
+unsafeIndex :: Buffer -> Int -> Word8
+unsafeIndex (Buf fp off len _ _) i = assert (i >= 0 && i < len) .
+    inlinePerformIO . withForeignPtr fp $ flip peekByteOff (off+i)
+{-# INLINE unsafeIndex #-}
+
+substring :: Int -> Int -> Buffer -> ByteString
+substring s l (Buf fp off len _ _) =
+  assert (s >= 0 && s <= len) .
+  assert (l >= 0 && l <= len-s) $
+  PS fp (off+s) l
+{-# INLINE substring #-}
+
+unsafeDrop :: Int -> Buffer -> ByteString
+unsafeDrop s (Buf fp off len _ _) =
+  assert (s >= 0 && s <= len) $
+  PS fp (off+s) (len-s)
+{-# INLINE unsafeDrop #-}
diff --git a/haddock-library/vendor/attoparsec-0.13.1.0/Data/Attoparsec/ByteString/Char8.hs b/haddock-library/vendor/attoparsec-0.13.1.0/Data/Attoparsec/ByteString/Char8.hs
new file mode 100644
index 00000000..7fafba40
--- /dev/null
+++ b/haddock-library/vendor/attoparsec-0.13.1.0/Data/Attoparsec/ByteString/Char8.hs
@@ -0,0 +1,464 @@
+{-# LANGUAGE BangPatterns, CPP, FlexibleInstances, TypeFamilies,
+    TypeSynonymInstances, GADTs #-}
+#if __GLASGOW_HASKELL__ >= 702
+{-# LANGUAGE Trustworthy #-} -- Imports internal modules
+#endif
+{-# OPTIONS_GHC -fno-warn-orphans -fno-warn-warnings-deprecations #-}
+
+-- |
+-- Module      :  Data.Attoparsec.ByteString.Char8
+-- Copyright   :  Bryan O'Sullivan 2007-2015
+-- License     :  BSD3
+--
+-- Maintainer  :  bos@serpentine.com
+-- Stability   :  experimental
+-- Portability :  unknown
+--
+-- Simple, efficient, character-oriented combinator parsing for
+-- 'B.ByteString' strings, loosely based on the Parsec library.
+
+module Data.Attoparsec.ByteString.Char8
+    (
+    -- * Character encodings
+    -- $encodings
+
+    -- * Parser types
+      Parser
+    , A.Result
+    , A.IResult(..)
+    , I.compareResults
+
+    -- * Running parsers
+    , A.parse
+    , A.feed
+    , A.parseOnly
+    , A.parseWith
+    , A.parseTest
+
+    -- ** Result conversion
+    , A.maybeResult
+    , A.eitherResult
+
+    -- * Parsing individual characters
+    , char
+    , char8
+    , anyChar
+    , notChar
+    , satisfy
+
+    -- ** Lookahead
+    , peekChar
+    , peekChar'
+
+    -- ** Special character parsers
+    , digit
+    , letter_iso8859_15
+    , letter_ascii
+    , space
+
+    -- ** Fast predicates
+    , isDigit
+    , isDigit_w8
+    , isAlpha_iso8859_15
+    , isAlpha_ascii
+    , isSpace
+    , isSpace_w8
+
+    -- *** Character classes
+    , inClass
+    , notInClass
+
+    -- * Efficient string handling
+    , I.string
+    , I.stringCI
+    , skipSpace
+    , skipWhile
+    , I.take
+    , scan
+    , takeWhile
+    , takeWhile1
+    , takeTill
+
+    -- ** String combinators
+    -- $specalt
+    , (.*>)
+    , (<*.)
+
+    -- ** Consume all remaining input
+    , I.takeByteString
+    , I.takeLazyByteString
+
+    -- * Text parsing
+    , I.endOfLine
+    , isEndOfLine
+    , isHorizontalSpace
+
+    -- * Numeric parsers
+    , decimal
+    , hexadecimal
+    , signed
+
+    -- * Combinators
+    , try
+    , (<?>)
+    , choice
+    , count
+    , option
+    , many'
+    , many1
+    , many1'
+    , manyTill
+    , manyTill'
+    , sepBy
+    , sepBy'
+    , sepBy1
+    , sepBy1'
+    , skipMany
+    , skipMany1
+    , eitherP
+    , I.match
+    -- * State observation and manipulation functions
+    , I.endOfInput
+    , I.atEnd
+    ) where
+
+#if !MIN_VERSION_base(4,8,0)
+import Control.Applicative (pure, (*>), (<*), (<$>))
+import Data.Word (Word)
+#endif
+import Control.Applicative ((<|>))
+import Data.Attoparsec.ByteString.FastSet (charClass, memberChar)
+import Data.Attoparsec.ByteString.Internal (Parser)
+import Data.Attoparsec.Combinator
+import Data.Bits (Bits, (.|.), shiftL)
+import Data.ByteString.Internal (c2w, w2c)
+import Data.Int (Int8, Int16, Int32, Int64)
+import Data.String (IsString(..))
+import Data.Word (Word8, Word16, Word32, Word64)
+import Prelude hiding (takeWhile)
+import qualified Data.Attoparsec.ByteString as A
+import qualified Data.Attoparsec.ByteString.Internal as I
+import qualified Data.Attoparsec.Internal as I
+import qualified Data.ByteString as B8
+import qualified Data.ByteString.Char8 as B
+
+instance (a ~ B.ByteString) => IsString (Parser a) where
+    fromString = I.string . B.pack
+
+-- $encodings
+--
+-- This module is intended for parsing text that is
+-- represented using an 8-bit character set, e.g. ASCII or
+-- ISO-8859-15.  It /does not/ make any attempt to deal with character
+-- encodings, multibyte characters, or wide characters.  In
+-- particular, all attempts to use characters above code point U+00FF
+-- will give wrong answers.
+--
+-- Code points below U+0100 are simply translated to and from their
+-- numeric values, so e.g. the code point U+00A4 becomes the byte
+-- @0xA4@ (which is the Euro symbol in ISO-8859-15, but the generic
+-- currency sign in ISO-8859-1).  Haskell 'Char' values above U+00FF
+-- are truncated, so e.g. U+1D6B7 is truncated to the byte @0xB7@.
+
+-- | Consume input as long as the predicate returns 'True', and return
+-- the consumed input.
+--
+-- This parser requires the predicate to succeed on at least one byte
+-- of input: it will fail if the predicate never returns 'True' or if
+-- there is no input left.
+takeWhile1 :: (Char -> Bool) -> Parser B.ByteString
+takeWhile1 p = I.takeWhile1 (p . w2c)
+{-# INLINE takeWhile1 #-}
+
+-- | The parser @satisfy p@ succeeds for any byte for which the
+-- predicate @p@ returns 'True'. Returns the byte that is actually
+-- parsed.
+--
+-- >digit = satisfy isDigit
+-- >    where isDigit c = c >= '0' && c <= '9'
+satisfy :: (Char -> Bool) -> Parser Char
+satisfy = I.satisfyWith w2c
+{-# INLINE satisfy #-}
+
+-- | Match a letter, in the ISO-8859-15 encoding.
+letter_iso8859_15 :: Parser Char
+letter_iso8859_15 = satisfy isAlpha_iso8859_15 <?> "letter_iso8859_15"
+{-# INLINE letter_iso8859_15 #-}
+
+-- | Match a letter, in the ASCII encoding.
+letter_ascii :: Parser Char
+letter_ascii = satisfy isAlpha_ascii <?> "letter_ascii"
+{-# INLINE letter_ascii #-}
+
+-- | A fast alphabetic predicate for the ISO-8859-15 encoding
+--
+-- /Note/: For all character encodings other than ISO-8859-15, and
+-- almost all Unicode code points above U+00A3, this predicate gives
+-- /wrong answers/.
+isAlpha_iso8859_15 :: Char -> Bool
+isAlpha_iso8859_15 c = (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z') ||
+                       (c >= '\166' && moby c)
+  where moby = notInClass "\167\169\171-\179\182\183\185\187\191\215\247"
+        {-# NOINLINE moby #-}
+{-# INLINE isAlpha_iso8859_15 #-}
+
+-- | A fast alphabetic predicate for the ASCII encoding
+--
+-- /Note/: For all character encodings other than ASCII, and
+-- almost all Unicode code points above U+007F, this predicate gives
+-- /wrong answers/.
+isAlpha_ascii :: Char -> Bool
+isAlpha_ascii c = (c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z')
+{-# INLINE isAlpha_ascii #-}
+
+-- | Parse a single digit.
+digit :: Parser Char
+digit = satisfy isDigit <?> "digit"
+{-# INLINE digit #-}
+
+-- | A fast digit predicate.
+isDigit :: Char -> Bool
+isDigit c = c >= '0' && c <= '9'
+{-# INLINE isDigit #-}
+
+-- | A fast digit predicate.
+isDigit_w8 :: Word8 -> Bool
+isDigit_w8 w = w - 48 <= 9
+{-# INLINE isDigit_w8 #-}
+
+-- | Match any character.
+anyChar :: Parser Char
+anyChar = satisfy $ const True
+{-# INLINE anyChar #-}
+
+-- | Match any character, to perform lookahead. Returns 'Nothing' if
+-- end of input has been reached. Does not consume any input.
+--
+-- /Note/: Because this parser does not fail, do not use it with
+-- combinators such as 'many', because such parsers loop until a
+-- failure occurs.  Careless use will thus result in an infinite loop.
+peekChar :: Parser (Maybe Char)
+peekChar = (fmap w2c) `fmap` I.peekWord8
+{-# INLINE peekChar #-}
+
+-- | Match any character, to perform lookahead.  Does not consume any
+-- input, but will fail if end of input has been reached.
+peekChar' :: Parser Char
+peekChar' = w2c `fmap` I.peekWord8'
+{-# INLINE peekChar' #-}
+
+-- | Fast predicate for matching ASCII space characters.
+--
+-- /Note/: This predicate only gives correct answers for the ASCII
+-- encoding.  For instance, it does not recognise U+00A0 (non-breaking
+-- space) as a space character, even though it is a valid ISO-8859-15
+-- byte. For a Unicode-aware and only slightly slower predicate,
+-- use 'Data.Char.isSpace'
+isSpace :: Char -> Bool
+isSpace c = (c == ' ') || ('\t' <= c && c <= '\r')
+{-# INLINE isSpace #-}
+
+-- | Fast 'Word8' predicate for matching ASCII space characters.
+isSpace_w8 :: Word8 -> Bool
+isSpace_w8 w = w == 32 || w - 9 <= 4
+{-# INLINE isSpace_w8 #-}
+
+
+-- | Parse a space character.
+--
+-- /Note/: This parser only gives correct answers for the ASCII
+-- encoding.  For instance, it does not recognise U+00A0 (non-breaking
+-- space) as a space character, even though it is a valid ISO-8859-15
+-- byte.
+space :: Parser Char
+space = satisfy isSpace <?> "space"
+{-# INLINE space #-}
+
+-- | Match a specific character.
+char :: Char -> Parser Char
+char c = satisfy (== c) <?> [c]
+{-# INLINE char #-}
+
+-- | Match a specific character, but return its 'Word8' value.
+char8 :: Char -> Parser Word8
+char8 c = I.satisfy (== c2w c) <?> [c]
+{-# INLINE char8 #-}
+
+-- | Match any character except the given one.
+notChar :: Char -> Parser Char
+notChar c = satisfy (/= c) <?> "not " ++ [c]
+{-# INLINE notChar #-}
+
+-- | Match any character in a set.
+--
+-- >vowel = inClass "aeiou"
+--
+-- Range notation is supported.
+--
+-- >halfAlphabet = inClass "a-nA-N"
+--
+-- To add a literal \'-\' to a set, place it at the beginning or end
+-- of the string.
+inClass :: String -> Char -> Bool
+inClass s = (`memberChar` mySet)
+    where mySet = charClass s
+{-# INLINE inClass #-}
+
+-- | Match any character not in a set.
+notInClass :: String -> Char -> Bool
+notInClass s = not . inClass s
+{-# INLINE notInClass #-}
+
+-- | Consume input as long as the predicate returns 'True', and return
+-- the consumed input.
+--
+-- This parser does not fail.  It will return an empty string if the
+-- predicate returns 'False' on the first byte of input.
+--
+-- /Note/: Because this parser does not fail, do not use it with
+-- combinators such as 'many', because such parsers loop until a
+-- failure occurs.  Careless use will thus result in an infinite loop.
+takeWhile :: (Char -> Bool) -> Parser B.ByteString
+takeWhile p = I.takeWhile (p . w2c)
+{-# INLINE takeWhile #-}
+
+-- | A stateful scanner.  The predicate consumes and transforms a
+-- state argument, and each transformed state is passed to successive
+-- invocations of the predicate on each byte of the input until one
+-- returns 'Nothing' or the input ends.
+--
+-- This parser does not fail.  It will return an empty string if the
+-- predicate returns 'Nothing' on the first byte of input.
+--
+-- /Note/: Because this parser does not fail, do not use it with
+-- combinators such as 'many', because such parsers loop until a
+-- failure occurs.  Careless use will thus result in an infinite loop.
+scan :: s -> (s -> Char -> Maybe s) -> Parser B.ByteString
+scan s0 p = I.scan s0 (\s -> p s . w2c)
+{-# INLINE scan #-}
+
+-- | Consume input as long as the predicate returns 'False'
+-- (i.e. until it returns 'True'), and return the consumed input.
+--
+-- This parser does not fail.  It will return an empty string if the
+-- predicate returns 'True' on the first byte of input.
+--
+-- /Note/: Because this parser does not fail, do not use it with
+-- combinators such as 'many', because such parsers loop until a
+-- failure occurs.  Careless use will thus result in an infinite loop.
+takeTill :: (Char -> Bool) -> Parser B.ByteString
+takeTill p = I.takeTill (p . w2c)
+{-# INLINE takeTill #-}
+
+-- | Skip past input for as long as the predicate returns 'True'.
+skipWhile :: (Char -> Bool) -> Parser ()
+skipWhile p = I.skipWhile (p . w2c)
+{-# INLINE skipWhile #-}
+
+-- | Skip over white space.
+skipSpace :: Parser ()
+skipSpace = I.skipWhile isSpace_w8
+{-# INLINE skipSpace #-}
+
+-- $specalt
+--
+-- If you enable the @OverloadedStrings@ language extension, you can
+-- use the '*>' and '<*' combinators to simplify the common task of
+-- matching a statically known string, then immediately parsing
+-- something else.
+--
+-- Instead of writing something like this:
+--
+-- @
+--'I.string' \"foo\" '*>' wibble
+-- @
+--
+-- Using @OverloadedStrings@, you can omit the explicit use of
+-- 'I.string', and write a more compact version:
+--
+-- @
+-- \"foo\" '*>' wibble
+-- @
+--
+-- (Note: the '.*>' and '<*.' combinators that were originally
+-- provided for this purpose are obsolete and unnecessary, and will be
+-- removed in the next major version.)
+
+-- | /Obsolete/. A type-specialized version of '*>' for
+-- 'B.ByteString'. Use '*>' instead.
+(.*>) :: B.ByteString -> Parser a -> Parser a
+s .*> f = I.string s *> f
+{-# DEPRECATED (.*>) "This is no longer necessary, and will be removed. Use '*>' instead." #-}
+
+-- | /Obsolete/. A type-specialized version of '<*' for
+-- 'B.ByteString'. Use '<*' instead.
+(<*.) :: Parser a -> B.ByteString -> Parser a
+f <*. s = f <* I.string s
+{-# DEPRECATED (<*.) "This is no longer necessary, and will be removed. Use '<*' instead." #-}
+
+-- | A predicate that matches either a carriage return @\'\\r\'@ or
+-- newline @\'\\n\'@ character.
+isEndOfLine :: Word8 -> Bool
+isEndOfLine w = w == 13 || w == 10
+{-# INLINE isEndOfLine #-}
+
+-- | A predicate that matches either a space @\' \'@ or horizontal tab
+-- @\'\\t\'@ character.
+isHorizontalSpace :: Word8 -> Bool
+isHorizontalSpace w = w == 32 || w == 9
+{-# INLINE isHorizontalSpace #-}
+
+-- | Parse and decode an unsigned hexadecimal number.  The hex digits
+-- @\'a\'@ through @\'f\'@ may be upper or lower case.
+--
+-- This parser does not accept a leading @\"0x\"@ string.
+hexadecimal :: (Integral a, Bits a) => Parser a
+hexadecimal = B8.foldl' step 0 `fmap` I.takeWhile1 isHexDigit
+  where
+    isHexDigit w = (w >= 48 && w <= 57) ||
+                   (w >= 97 && w <= 102) ||
+                   (w >= 65 && w <= 70)
+    step a w | w >= 48 && w <= 57  = (a `shiftL` 4) .|. fromIntegral (w - 48)
+             | w >= 97             = (a `shiftL` 4) .|. fromIntegral (w - 87)
+             | otherwise           = (a `shiftL` 4) .|. fromIntegral (w - 55)
+{-# SPECIALISE hexadecimal :: Parser Int #-}
+{-# SPECIALISE hexadecimal :: Parser Int8 #-}
+{-# SPECIALISE hexadecimal :: Parser Int16 #-}
+{-# SPECIALISE hexadecimal :: Parser Int32 #-}
+{-# SPECIALISE hexadecimal :: Parser Int64 #-}
+{-# SPECIALISE hexadecimal :: Parser Integer #-}
+{-# SPECIALISE hexadecimal :: Parser Word #-}
+{-# SPECIALISE hexadecimal :: Parser Word8 #-}
+{-# SPECIALISE hexadecimal :: Parser Word16 #-}
+{-# SPECIALISE hexadecimal :: Parser Word32 #-}
+{-# SPECIALISE hexadecimal :: Parser Word64 #-}
+
+-- | Parse and decode an unsigned decimal number.
+decimal :: Integral a => Parser a
+decimal = B8.foldl' step 0 `fmap` I.takeWhile1 isDigit_w8
+  where step a w = a * 10 + fromIntegral (w - 48)
+{-# SPECIALISE decimal :: Parser Int #-}
+{-# SPECIALISE decimal :: Parser Int8 #-}
+{-# SPECIALISE decimal :: Parser Int16 #-}
+{-# SPECIALISE decimal :: Parser Int32 #-}
+{-# SPECIALISE decimal :: Parser Int64 #-}
+{-# SPECIALISE decimal :: Parser Integer #-}
+{-# SPECIALISE decimal :: Parser Word #-}
+{-# SPECIALISE decimal :: Parser Word8 #-}
+{-# SPECIALISE decimal :: Parser Word16 #-}
+{-# SPECIALISE decimal :: Parser Word32 #-}
+{-# SPECIALISE decimal :: Parser Word64 #-}
+
+-- | Parse a number with an optional leading @\'+\'@ or @\'-\'@ sign
+-- character.
+signed :: Num a => Parser a -> Parser a
+{-# SPECIALISE signed :: Parser Int -> Parser Int #-}
+{-# SPECIALISE signed :: Parser Int8 -> Parser Int8 #-}
+{-# SPECIALISE signed :: Parser Int16 -> Parser Int16 #-}
+{-# SPECIALISE signed :: Parser Int32 -> Parser Int32 #-}
+{-# SPECIALISE signed :: Parser Int64 -> Parser Int64 #-}
+{-# SPECIALISE signed :: Parser Integer -> Parser Integer #-}
+signed p = (negate <$> (char8 '-' *> p))
+       <|> (char8 '+' *> p)
+       <|> p
+
diff --git a/haddock-library/vendor/attoparsec-0.13.1.0/Data/Attoparsec/ByteString/FastSet.hs b/haddock-library/vendor/attoparsec-0.13.1.0/Data/Attoparsec/ByteString/FastSet.hs
new file mode 100644
index 00000000..d15854c4
--- /dev/null
+++ b/haddock-library/vendor/attoparsec-0.13.1.0/Data/Attoparsec/ByteString/FastSet.hs
@@ -0,0 +1,115 @@
+{-# LANGUAGE BangPatterns, MagicHash #-}
+
+-----------------------------------------------------------------------------
+-- |
+-- Module      :  Data.Attoparsec.ByteString.FastSet
+-- Copyright   :  Bryan O'Sullivan 2007-2015
+-- License     :  BSD3
+--
+-- Maintainer  :  bos@serpentine.com
+-- Stability   :  experimental
+-- Portability :  unknown
+--
+-- Fast set membership tests for 'Word8' and 8-bit 'Char' values.  The
+-- set representation is unboxed for efficiency.  For small sets, we
+-- test for membership using a binary search.  For larger sets, we use
+-- a lookup table.
+--
+-----------------------------------------------------------------------------
+module Data.Attoparsec.ByteString.FastSet
+    (
+    -- * Data type
+      FastSet
+    -- * Construction
+    , fromList
+    , set
+    -- * Lookup
+    , memberChar
+    , memberWord8
+    -- * Debugging
+    , fromSet
+    -- * Handy interface
+    , charClass
+    ) where
+
+import Data.Bits ((.&.), (.|.))
+import Foreign.Storable (peekByteOff, pokeByteOff)
+import GHC.Base (Int(I#), iShiftRA#, narrow8Word#, shiftL#)
+import GHC.Word (Word8(W8#))
+import qualified Data.ByteString as B
+import qualified Data.ByteString.Char8 as B8
+import qualified Data.ByteString.Internal as I
+import qualified Data.ByteString.Unsafe as U
+
+data FastSet = Sorted { fromSet :: !B.ByteString }
+             | Table  { fromSet :: !B.ByteString }
+    deriving (Eq, Ord)
+
+instance Show FastSet where
+    show (Sorted s) = "FastSet Sorted " ++ show (B8.unpack s)
+    show (Table _) = "FastSet Table"
+
+-- | The lower bound on the size of a lookup table.  We choose this to
+-- balance table density against performance.
+tableCutoff :: Int
+tableCutoff = 8
+
+-- | Create a set.
+set :: B.ByteString -> FastSet
+set s | B.length s < tableCutoff = Sorted . B.sort $ s
+      | otherwise                = Table . mkTable $ s
+
+fromList :: [Word8] -> FastSet
+fromList = set . B.pack
+
+data I = I {-# UNPACK #-} !Int {-# UNPACK #-} !Word8
+
+shiftR :: Int -> Int -> Int
+shiftR (I# x#) (I# i#) = I# (x# `iShiftRA#` i#)
+
+shiftL :: Word8 -> Int -> Word8
+shiftL (W8# x#) (I# i#) = W8# (narrow8Word# (x# `shiftL#` i#))
+
+index :: Int -> I
+index i = I (i `shiftR` 3) (1 `shiftL` (i .&. 7))
+{-# INLINE index #-}
+
+-- | Check the set for membership.
+memberWord8 :: Word8 -> FastSet -> Bool
+memberWord8 w (Table t)  =
+    let I byte bit = index (fromIntegral w)
+    in  U.unsafeIndex t byte .&. bit /= 0
+memberWord8 w (Sorted s) = search 0 (B.length s - 1)
+    where search lo hi
+              | hi < lo = False
+              | otherwise =
+                  let mid = (lo + hi) `quot` 2
+                  in case compare w (U.unsafeIndex s mid) of
+                       GT -> search (mid + 1) hi
+                       LT -> search lo (mid - 1)
+                       _ -> True
+
+-- | Check the set for membership.  Only works with 8-bit characters:
+-- characters above code point 255 will give wrong answers.
+memberChar :: Char -> FastSet -> Bool
+memberChar c = memberWord8 (I.c2w c)
+{-# INLINE memberChar #-}
+
+mkTable :: B.ByteString -> B.ByteString
+mkTable s = I.unsafeCreate 32 $ \t -> do
+            _ <- I.memset t 0 32
+            U.unsafeUseAsCStringLen s $ \(p, l) ->
+              let loop n | n == l = return ()
+                         | otherwise = do
+                    c <- peekByteOff p n :: IO Word8
+                    let I byte bit = index (fromIntegral c)
+                    prev <- peekByteOff t byte :: IO Word8
+                    pokeByteOff t byte (prev .|. bit)
+                    loop (n + 1)
+              in loop 0
+
+charClass :: String -> FastSet
+charClass = set . B8.pack . go
+    where go (a:'-':b:xs) = [a..b] ++ go xs
+          go (x:xs) = x : go xs
+          go _ = ""
diff --git a/haddock-library/vendor/attoparsec-0.13.1.0/Data/Attoparsec/ByteString/Internal.hs b/haddock-library/vendor/attoparsec-0.13.1.0/Data/Attoparsec/ByteString/Internal.hs
new file mode 100644
index 00000000..4938ea87
--- /dev/null
+++ b/haddock-library/vendor/attoparsec-0.13.1.0/Data/Attoparsec/ByteString/Internal.hs
@@ -0,0 +1,536 @@
+{-# LANGUAGE BangPatterns, CPP, GADTs, OverloadedStrings, RankNTypes,
+    RecordWildCards #-}
+-- |
+-- Module      :  Data.Attoparsec.ByteString.Internal
+-- Copyright   :  Bryan O'Sullivan 2007-2015
+-- License     :  BSD3
+--
+-- Maintainer  :  bos@serpentine.com
+-- Stability   :  experimental
+-- Portability :  unknown
+--
+-- Simple, efficient parser combinators for 'ByteString' strings,
+-- loosely based on the Parsec library.
+
+module Data.Attoparsec.ByteString.Internal
+    (
+    -- * Parser types
+      Parser
+    , Result
+
+    -- * Running parsers
+    , parse
+    , parseOnly
+
+    -- * Combinators
+    , module Data.Attoparsec.Combinator
+
+    -- * Parsing individual bytes
+    , satisfy
+    , satisfyWith
+    , anyWord8
+    , skip
+    , word8
+    , notWord8
+
+    -- ** Lookahead
+    , peekWord8
+    , peekWord8'
+
+    -- ** Byte classes
+    , inClass
+    , notInClass
+
+    -- * Parsing more complicated structures
+    , storable
+
+    -- * Efficient string handling
+    , skipWhile
+    , string
+    , stringCI
+    , take
+    , scan
+    , runScanner
+    , takeWhile
+    , takeWhile1
+    , takeTill
+
+    -- ** Consume all remaining input
+    , takeByteString
+    , takeLazyByteString
+
+    -- * Utilities
+    , endOfLine
+    , endOfInput
+    , match
+    , atEnd
+    ) where
+
+#if !MIN_VERSION_base(4,8,0)
+import Control.Applicative ((<$>))
+#endif
+import Control.Applicative ((<|>))
+import Control.Monad (when)
+import Data.Attoparsec.ByteString.Buffer (Buffer, buffer)
+import Data.Attoparsec.ByteString.FastSet (charClass, memberWord8)
+import Data.Attoparsec.Combinator ((<?>))
+import Data.Attoparsec.Internal
+import Data.Attoparsec.Internal.Fhthagn (inlinePerformIO)
+import Data.Attoparsec.Internal.Types hiding (Parser, Failure, Success)
+import Data.ByteString (ByteString)
+import Data.List (intercalate)
+import Data.Word (Word8)
+import Foreign.ForeignPtr (withForeignPtr)
+import Foreign.Ptr (castPtr, minusPtr, plusPtr)
+import Foreign.Storable (Storable(peek, sizeOf))
+import Prelude hiding (getChar, succ, take, takeWhile)
+import qualified Data.Attoparsec.ByteString.Buffer as Buf
+import qualified Data.Attoparsec.Internal.Types as T
+import qualified Data.ByteString as B8
+import qualified Data.ByteString.Char8 as B
+import qualified Data.ByteString.Internal as B
+import qualified Data.ByteString.Lazy as L
+import qualified Data.ByteString.Unsafe as B
+
+type Parser = T.Parser ByteString
+type Result = IResult ByteString
+type Failure r = T.Failure ByteString Buffer r
+type Success a r = T.Success ByteString Buffer a r
+
+-- | The parser @satisfy p@ succeeds for any byte for which the
+-- predicate @p@ returns 'True'. Returns the byte that is actually
+-- parsed.
+--
+-- >digit = satisfy isDigit
+-- >    where isDigit w = w >= 48 && w <= 57
+satisfy :: (Word8 -> Bool) -> Parser Word8
+satisfy p = do
+  h <- peekWord8'
+  if p h
+    then advance 1 >> return h
+    else fail "satisfy"
+{-# INLINE satisfy #-}
+
+-- | The parser @skip p@ succeeds for any byte for which the predicate
+-- @p@ returns 'True'.
+--
+-- >skipDigit = skip isDigit
+-- >    where isDigit w = w >= 48 && w <= 57
+skip :: (Word8 -> Bool) -> Parser ()
+skip p = do
+  h <- peekWord8'
+  if p h
+    then advance 1
+    else fail "skip"
+
+-- | The parser @satisfyWith f p@ transforms a byte, and succeeds if
+-- the predicate @p@ returns 'True' on the transformed value. The
+-- parser returns the transformed byte that was parsed.
+satisfyWith :: (Word8 -> a) -> (a -> Bool) -> Parser a
+satisfyWith f p = do
+  h <- peekWord8'
+  let c = f h
+  if p c
+    then advance 1 >> return c
+    else fail "satisfyWith"
+{-# INLINE satisfyWith #-}
+
+storable :: Storable a => Parser a
+storable = hack undefined
+ where
+  hack :: Storable b => b -> Parser b
+  hack dummy = do
+    (fp,o,_) <- B.toForeignPtr `fmap` take (sizeOf dummy)
+    return . inlinePerformIO . withForeignPtr fp $ \p ->
+        peek (castPtr $ p `plusPtr` o)
+
+-- | Consume exactly @n@ bytes of input.
+take :: Int -> Parser ByteString
+take n0 = do
+  let n = max n0 0
+  s <- ensure n
+  advance n >> return s
+{-# INLINE take #-}
+
+-- | @string s@ parses a sequence of bytes that identically match
+-- @s@. Returns the parsed string (i.e. @s@).  This parser consumes no
+-- input if it fails (even if a partial match).
+--
+-- /Note/: The behaviour of this parser is different to that of the
+-- similarly-named parser in Parsec, as this one is all-or-nothing.
+-- To illustrate the difference, the following parser will fail under
+-- Parsec given an input of @\"for\"@:
+--
+-- >string "foo" <|> string "for"
+--
+-- The reason for its failure is that the first branch is a
+-- partial match, and will consume the letters @\'f\'@ and @\'o\'@
+-- before failing.  In attoparsec, the above parser will /succeed/ on
+-- that input, because the failed first branch will consume nothing.
+string :: ByteString -> Parser ByteString
+string s = string_ (stringSuspended id) id s
+{-# INLINE string #-}
+
+-- ASCII-specific but fast, oh yes.
+toLower :: Word8 -> Word8
+toLower w | w >= 65 && w <= 90 = w + 32
+          | otherwise          = w
+
+-- | Satisfy a literal string, ignoring case.
+stringCI :: ByteString -> Parser ByteString
+stringCI s = string_ (stringSuspended lower) lower s
+  where lower = B8.map toLower
+{-# INLINE stringCI #-}
+
+string_ :: (forall r. ByteString -> ByteString -> Buffer -> Pos -> More
+            -> Failure r -> Success ByteString r -> Result r)
+        -> (ByteString -> ByteString)
+        -> ByteString -> Parser ByteString
+string_ suspended f s0 = T.Parser $ \t pos more lose succ ->
+  let n = B.length s
+      s = f s0
+  in if lengthAtLeast pos n t
+     then let t' = substring pos (Pos n) t
+          in if s == f t'
+             then succ t (pos + Pos n) more t'
+             else lose t pos more [] "string"
+     else let t' = Buf.unsafeDrop (fromPos pos) t
+          in if f t' `B.isPrefixOf` s
+             then suspended s (B.drop (B.length t') s) t pos more lose succ
+             else lose t pos more [] "string"
+{-# INLINE string_ #-}
+
+stringSuspended :: (ByteString -> ByteString)
+                -> ByteString -> ByteString -> Buffer -> Pos -> More
+                -> Failure r
+                -> Success ByteString r
+                -> Result r
+stringSuspended f s0 s t pos more lose succ =
+    runParser (demandInput_ >>= go) t pos more lose succ
+  where go s'0   = T.Parser $ \t' pos' more' lose' succ' ->
+          let m  = B.length s
+              s' = f s'0
+              n  = B.length s'
+          in if n >= m
+             then if B.unsafeTake m s' == s
+                  then let o = Pos (B.length s0)
+                       in succ' t' (pos' + o) more'
+                          (substring pos' o t')
+                  else lose' t' pos' more' [] "string"
+             else if s' == B.unsafeTake n s
+                  then stringSuspended f s0 (B.unsafeDrop n s)
+                       t' pos' more' lose' succ'
+                  else lose' t' pos' more' [] "string"
+
+-- | Skip past input for as long as the predicate returns 'True'.
+skipWhile :: (Word8 -> Bool) -> Parser ()
+skipWhile p = go
+ where
+  go = do
+    t <- B8.takeWhile p <$> get
+    continue <- inputSpansChunks (B.length t)
+    when continue go
+{-# INLINE skipWhile #-}
+
+-- | Consume input as long as the predicate returns 'False'
+-- (i.e. until it returns 'True'), and return the consumed input.
+--
+-- This parser does not fail.  It will return an empty string if the
+-- predicate returns 'True' on the first byte of input.
+--
+-- /Note/: Because this parser does not fail, do not use it with
+-- combinators such as 'Control.Applicative.many', because such
+-- parsers loop until a failure occurs.  Careless use will thus result
+-- in an infinite loop.
+takeTill :: (Word8 -> Bool) -> Parser ByteString
+takeTill p = takeWhile (not . p)
+{-# INLINE takeTill #-}
+
+-- | Consume input as long as the predicate returns 'True', and return
+-- the consumed input.
+--
+-- This parser does not fail.  It will return an empty string if the
+-- predicate returns 'False' on the first byte of input.
+--
+-- /Note/: Because this parser does not fail, do not use it with
+-- combinators such as 'Control.Applicative.many', because such
+-- parsers loop until a failure occurs.  Careless use will thus result
+-- in an infinite loop.
+takeWhile :: (Word8 -> Bool) -> Parser ByteString
+takeWhile p = do
+    s <- B8.takeWhile p <$> get
+    continue <- inputSpansChunks (B.length s)
+    if continue
+      then takeWhileAcc p [s]
+      else return s
+{-# INLINE takeWhile #-}
+
+takeWhileAcc :: (Word8 -> Bool) -> [ByteString] -> Parser ByteString
+takeWhileAcc p = go
+ where
+  go acc = do
+    s <- B8.takeWhile p <$> get
+    continue <- inputSpansChunks (B.length s)
+    if continue
+      then go (s:acc)
+      else return $ concatReverse (s:acc)
+{-# INLINE takeWhileAcc #-}
+
+takeRest :: Parser [ByteString]
+takeRest = go []
+ where
+  go acc = do
+    input <- wantInput
+    if input
+      then do
+        s <- get
+        advance (B.length s)
+        go (s:acc)
+      else return (reverse acc)
+
+-- | Consume all remaining input and return it as a single string.
+takeByteString :: Parser ByteString
+takeByteString = B.concat `fmap` takeRest
+
+-- | Consume all remaining input and return it as a single string.
+takeLazyByteString :: Parser L.ByteString
+takeLazyByteString = L.fromChunks `fmap` takeRest
+
+data T s = T {-# UNPACK #-} !Int s
+
+scan_ :: (s -> [ByteString] -> Parser r) -> s -> (s -> Word8 -> Maybe s)
+         -> Parser r
+scan_ f s0 p = go [] s0
+ where
+  go acc s1 = do
+    let scanner (B.PS fp off len) =
+          withForeignPtr fp $ \ptr0 -> do
+            let start = ptr0 `plusPtr` off
+                end   = start `plusPtr` len
+                inner ptr !s
+                  | ptr < end = do
+                    w <- peek ptr
+                    case p s w of
+                      Just s' -> inner (ptr `plusPtr` 1) s'
+                      _       -> done (ptr `minusPtr` start) s
+                  | otherwise = done (ptr `minusPtr` start) s
+                done !i !s = return (T i s)
+            inner start s1
+    bs <- get
+    let T i s' = inlinePerformIO $ scanner bs
+        !h = B.unsafeTake i bs
+    continue <- inputSpansChunks i
+    if continue
+      then go (h:acc) s'
+      else f s' (h:acc)
+{-# INLINE scan_ #-}
+
+-- | A stateful scanner.  The predicate consumes and transforms a
+-- state argument, and each transformed state is passed to successive
+-- invocations of the predicate on each byte of the input until one
+-- returns 'Nothing' or the input ends.
+--
+-- This parser does not fail.  It will return an empty string if the
+-- predicate returns 'Nothing' on the first byte of input.
+--
+-- /Note/: Because this parser does not fail, do not use it with
+-- combinators such as 'Control.Applicative.many', because such
+-- parsers loop until a failure occurs.  Careless use will thus result
+-- in an infinite loop.
+scan :: s -> (s -> Word8 -> Maybe s) -> Parser ByteString
+scan = scan_ $ \_ chunks -> return $! concatReverse chunks
+{-# INLINE scan #-}
+
+-- | Like 'scan', but generalized to return the final state of the
+-- scanner.
+runScanner :: s -> (s -> Word8 -> Maybe s) -> Parser (ByteString, s)
+runScanner = scan_ $ \s xs -> let !sx = concatReverse xs in return (sx, s)
+{-# INLINE runScanner #-}
+
+-- | Consume input as long as the predicate returns 'True', and return
+-- the consumed input.
+--
+-- This parser requires the predicate to succeed on at least one byte
+-- of input: it will fail if the predicate never returns 'True' or if
+-- there is no input left.
+takeWhile1 :: (Word8 -> Bool) -> Parser ByteString
+takeWhile1 p = do
+  (`when` demandInput) =<< endOfChunk
+  s <- B8.takeWhile p <$> get
+  let len = B.length s
+  if len == 0
+    then fail "takeWhile1"
+    else do
+      advance len
+      eoc <- endOfChunk
+      if eoc
+        then takeWhileAcc p [s]
+        else return s
+{-# INLINE takeWhile1 #-}
+
+-- | Match any byte in a set.
+--
+-- >vowel = inClass "aeiou"
+--
+-- Range notation is supported.
+--
+-- >halfAlphabet = inClass "a-nA-N"
+--
+-- To add a literal @\'-\'@ to a set, place it at the beginning or end
+-- of the string.
+inClass :: String -> Word8 -> Bool
+inClass s = (`memberWord8` mySet)
+    where mySet = charClass s
+          {-# NOINLINE mySet #-}
+{-# INLINE inClass #-}
+
+-- | Match any byte not in a set.
+notInClass :: String -> Word8 -> Bool
+notInClass s = not . inClass s
+{-# INLINE notInClass #-}
+
+-- | Match any byte.
+anyWord8 :: Parser Word8
+anyWord8 = satisfy $ const True
+{-# INLINE anyWord8 #-}
+
+-- | Match a specific byte.
+word8 :: Word8 -> Parser Word8
+word8 c = satisfy (== c) <?> show c
+{-# INLINE word8 #-}
+
+-- | Match any byte except the given one.
+notWord8 :: Word8 -> Parser Word8
+notWord8 c = satisfy (/= c) <?> "not " ++ show c
+{-# INLINE notWord8 #-}
+
+-- | Match any byte, to perform lookahead. Returns 'Nothing' if end of
+-- input has been reached. Does not consume any input.
+--
+-- /Note/: Because this parser does not fail, do not use it with
+-- combinators such as 'Control.Applicative.many', because such
+-- parsers loop until a failure occurs.  Careless use will thus result
+-- in an infinite loop.
+peekWord8 :: Parser (Maybe Word8)
+peekWord8 = T.Parser $ \t pos@(Pos pos_) more _lose succ ->
+  case () of
+    _| pos_ < Buf.length t ->
+       let !w = Buf.unsafeIndex t pos_
+       in succ t pos more (Just w)
+     | more == Complete ->
+       succ t pos more Nothing
+     | otherwise ->
+       let succ' t' pos' more' = let !w = Buf.unsafeIndex t' pos_
+                                 in succ t' pos' more' (Just w)
+           lose' t' pos' more' = succ t' pos' more' Nothing
+       in prompt t pos more lose' succ'
+{-# INLINE peekWord8 #-}
+
+-- | Match any byte, to perform lookahead.  Does not consume any
+-- input, but will fail if end of input has been reached.
+peekWord8' :: Parser Word8
+peekWord8' = T.Parser $ \t pos more lose succ ->
+    if lengthAtLeast pos 1 t
+    then succ t pos more (Buf.unsafeIndex t (fromPos pos))
+    else let succ' t' pos' more' bs' = succ t' pos' more' $! B.unsafeHead bs'
+         in ensureSuspended 1 t pos more lose succ'
+{-# INLINE peekWord8' #-}
+
+-- | Match either a single newline character @\'\\n\'@, or a carriage
+-- return followed by a newline character @\"\\r\\n\"@.
+endOfLine :: Parser ()
+endOfLine = (word8 10 >> return ()) <|> (string "\r\n" >> return ())
+
+-- | Terminal failure continuation.
+failK :: Failure a
+failK t (Pos pos) _more stack msg = Fail (Buf.unsafeDrop pos t) stack msg
+{-# INLINE failK #-}
+
+-- | Terminal success continuation.
+successK :: Success a a
+successK t (Pos pos) _more a = Done (Buf.unsafeDrop pos t) a
+{-# INLINE successK #-}
+
+-- | Run a parser.
+parse :: Parser a -> ByteString -> Result a
+parse m s = T.runParser m (buffer s) (Pos 0) Incomplete failK successK
+{-# INLINE parse #-}
+
+-- | Run a parser that cannot be resupplied via a 'Partial' result.
+--
+-- This function does not force a parser to consume all of its input.
+-- Instead, any residual input will be discarded.  To force a parser
+-- to consume all of its input, use something like this:
+--
+-- @
+--'parseOnly' (myParser 'Control.Applicative.<*' 'endOfInput')
+-- @
+parseOnly :: Parser a -> ByteString -> Either String a
+parseOnly m s = case T.runParser m (buffer s) (Pos 0) Complete failK successK of
+                  Fail _ [] err   -> Left err
+                  Fail _ ctxs err -> Left (intercalate " > " ctxs ++ ": " ++ err)
+                  Done _ a        -> Right a
+                  _               -> error "parseOnly: impossible error!"
+{-# INLINE parseOnly #-}
+
+get :: Parser ByteString
+get = T.Parser $ \t pos more _lose succ ->
+  succ t pos more (Buf.unsafeDrop (fromPos pos) t)
+{-# INLINE get #-}
+
+endOfChunk :: Parser Bool
+endOfChunk = T.Parser $ \t pos more _lose succ ->
+  succ t pos more (fromPos pos == Buf.length t)
+{-# INLINE endOfChunk #-}
+
+inputSpansChunks :: Int -> Parser Bool
+inputSpansChunks i = T.Parser $ \t pos_ more _lose succ ->
+  let pos = pos_ + Pos i
+  in if fromPos pos < Buf.length t || more == Complete
+     then succ t pos more False
+     else let lose' t' pos' more' = succ t' pos' more' False
+              succ' t' pos' more' = succ t' pos' more' True
+          in prompt t pos more lose' succ'
+{-# INLINE inputSpansChunks #-}
+
+advance :: Int -> Parser ()
+advance n = T.Parser $ \t pos more _lose succ ->
+  succ t (pos + Pos n) more ()
+{-# INLINE advance #-}
+
+ensureSuspended :: Int -> Buffer -> Pos -> More
+                -> Failure r
+                -> Success ByteString r
+                -> Result r
+ensureSuspended n t pos more lose succ =
+    runParser (demandInput >> go) t pos more lose succ
+  where go = T.Parser $ \t' pos' more' lose' succ' ->
+          if lengthAtLeast pos' n t'
+          then succ' t' pos' more' (substring pos (Pos n) t')
+          else runParser (demandInput >> go) t' pos' more' lose' succ'
+
+-- | If at least @n@ elements of input are available, return the
+-- current input, otherwise fail.
+ensure :: Int -> Parser ByteString
+ensure n = T.Parser $ \t pos more lose succ ->
+    if lengthAtLeast pos n t
+    then succ t pos more (substring pos (Pos n) t)
+    -- The uncommon case is kept out-of-line to reduce code size:
+    else ensureSuspended n t pos more lose succ
+{-# INLINE ensure #-}
+
+-- | Return both the result of a parse and the portion of the input
+-- that was consumed while it was being parsed.
+match :: Parser a -> Parser (ByteString, a)
+match p = T.Parser $ \t pos more lose succ ->
+  let succ' t' pos' more' a =
+        succ t' pos' more' (substring pos (pos'-pos) t', a)
+  in runParser p t pos more lose succ'
+
+lengthAtLeast :: Pos -> Int -> Buffer -> Bool
+lengthAtLeast (Pos pos) n bs = Buf.length bs >= pos + n
+{-# INLINE lengthAtLeast #-}
+
+substring :: Pos -> Pos -> Buffer -> ByteString
+substring (Pos pos) (Pos n) = Buf.substring pos n
+{-# INLINE substring #-}