Fix typos and spacing.

* AUTHORS, FAQ, NEWS, README, lisp/emms-bookmarks.el,
  lisp/emms-cache.el, lisp/later-do.el: Fix typos and spacing.

1 files changed, 67 insertions, 59 deletions

diff --git a/README b/README
index 16110c8..34b727a 100644
--- a/README
+++ b/README
@@ -1,79 +1,80 @@
 EMMS --- The Emacs Multi-Media System                -*-outline-*-
 =====================================
 
+
 * Introduction, Overview
 ========================
 
-EMMS is the Emacs Multi-Media System. It tries to be a clean and small
-application to play multimedia files from Emacs using external
-players. Many of it's ideas are derived from MpthreePlayer
+EMMS is the Emacs Multi-Media System.  It tries to be a clean and
+small application to play multimedia files from Emacs using external
+players.  Many of its ideas are derived from MpthreePlayer
 (http://www.nongnu.org/mp3player), but it tries to be more general and
 more clean.
 
    The basic functionality of Emms consists of three parts: The core,
 the sources, and the players.
 
-   The core resides in `emms.el', and provides a simple playlist and the
-basic functionality to use all the other features of Emms. It provides
-the common user commands and interfaces for other parts. It thinks in
-tracks, where a track is the combination of a type and a name - e.g.
-the track type 'file has a name that is the file name. Other track
-types are possible.
+   The core resides in `emms.el', and provides a simple playlist and
+the basic functionality to use all the other features of Emms.  It
+provides the common user commands and interfaces for other parts.  It
+thinks in tracks, where a track is the combination of a type and a
+name--e.g., the track type 'file has a name that is the file name.
+Other track types are possible.
 
-   To get to tracks, the core needs sources. The file
-`emms-source-file.el' provides simple sources to interact with the file
-system.
+   To get to tracks, the core needs sources.  The file
+`emms-source-file.el' provides simple sources to interact with the
+file system.
 
-   When Emms finally has the sources in the playlist, it needs a player
-to play them. `emms-player-simple.el' defines a few useful players, and
-allows you to define your own in a very simple way.
+   When Emms finally has the sources in the playlist, it needs a
+player to play them.  `emms-player-simple.el' defines a few useful
+players, and allows you to define your own in a very simple way.
 
    The way Emms works is easy to customize with your own code or by
-using `M-x customize'.
+using `M-x customize RET'.
 
 
 * Installation
 ==============
 
 You need to put all the .el files of EMMS in a directory in your
-load-path. For example, if you put all those files into ~/elisp/emms/,
-then in your ~/.emacs, you should do:
+load-path.  For example, if you put all those files into
+~/elisp/emms/, then in your ~/.emacs you should do:
 
 (add-to-list 'load-path "~/elisp/emms/")
 
-For information about compiling Emms into byte-code see the "Compiling
-Emms" section in the Emms manual.
+For information about compiling Emms into byte-code see the
+``Compiling Emms'' section in the Emms manual.
 
 ** Setup
 --------
-After adding the location of the Emms code to the LOAD-PATH variable, we
-invoke the following using the `emms-setup' feature which allows for
-quick and simple Emms setup.
+After adding the location of the Emms code to the load-path variable,
+we invoke the following using the `emms-setup' feature which allows
+for quick and simple Emms setup.
 
      (require 'emms-setup)
      (emms-standard)
      (emms-default-players)
 
-   After which Emms is set-up and ready to go!
+After which Emms is set-up and ready to go!
 
-For more information about different setup levels and features see the
-"Simple Setup" section of the Emms manual.
+   For more information about different setup levels and features see
+the ``Simple Setup'' section of the Emms manual.
 
 ** Usage
 --------
 The basic functionality of EMMS is just to play music without being
-noticed. It provides a few commands to skip the current track and
-such, but else, it doesn't show up. EMMS provides the following basic
-user commands (that you might want to bind to keys):
+noticed.  It provides a few commands to skip the current track and
+such, but otherwise, it doesn't show up.  EMMS provides the following
+basic user commands (that you might want to bind to keys):
 
 emms-start ...... Start playing the current playlist
 emms-stop ....... Stop playing
 emms-next ....... Go to the next track in the playlist
 emms-previous ... Go to the previous track in the playlist
 emms-shuffle .... Shuffle the playlist
-emms-show ....... What are you playing?
+emms-show ....... What is playing?
 
-But before you can use these, you need a playlist to start with. The
+But before you can use these, you need a playlist to start with.  The
 following commands allow you to create a playlist from different
 sources:
 
@@ -81,18 +82,20 @@ emms-play-file ............. Play a single file
 emms-play-directory ........ Play a whole directory
 emms-play-directory-tree ... Play a directory tree
 
+
 * The Interactive Playlist buffer
 =================================
 
 Emms provides a visual, interactive playlist mode as well as the
-ability to use playlists without ever looking at then. This visual,
+ability to use playlists without ever looking at them.  This visual,
 interactive mode is called the `emms-playlist-mode' and is defined in
 `emms-playlist-mode.el'.
 
-To use the interactive playlist invoke: `M-x emms-playlist-mode-go'
+   To use the interactive playlist invoke: `M-x emms-playlist-mode-go
+RET'
 
    When in the interactive playlist mode we can perform different
-actions on the current playlist. Here are some basic commands:
+actions on the current playlist.  Here are some basic commands:
 
 `n'....Start playing the next track in the playlist.
 
@@ -104,21 +107,22 @@ actions on the current playlist. Here are some basic commands:
 
 `c'....Display the current track in the center of the screen.
 
-`RET'..Start playing the track under point. Note that this is also
-       available with `<mouse-2>'.
+`RET'..Start playing the track under point.  Note that this is also
+       available with `Mouse-2'.
 
-`q'....Put the interactive playlist buffer at the end of the list of all
-       buffers (ie. bury it).
+`q'....Put the interactive playlist buffer at the end of the list of
+       all buffers (i.e., bury it).
 
 As always, for more commands see the mode documentation and the
-"Interactive Playlists" section of the Emms manual.
+``Interactive Playlists'' section of the Emms manual.
+
 
 * Bare Bones Setup
 ==================
 
 The following code fragment provides a minimal EMMS setup without
-using the layer of `emms-default'. It can maybe be used to better
-understand the internals of EMMS. You can see how EMMS needs to know
+using the layer of `emms-default'.  It can maybe be used to better
+understand the internals of EMMS.  You can see how EMMS needs to know
 about players (these are defined in `emms-player-simple') and about
 sources for tracks (trivial file system based sources, such as this
 `emms-directory-tree', are defined in `emms-source-file').
@@ -130,39 +134,41 @@ sources for tracks (trivial file system based sources, such as this
                          emms-player-ogg123
                          emms-player-mplayer))
 
+
 * Advanced configuration
 ========================
 
 ** Seeking
 ----------
 In most multimedia players, you can seek forward or backward in a
-track. EMMS supports this too. If you're using mplayer, check that
-`emms-player-mplayer-parameters' contains "slave". If you're using
-mpg321, there is a module called emms-player-mpg321-remote.el. To use
-it, simply add the following lines to your configuration :
+track.  EMMS supports this too.  If you're using mplayer, check that
+`emms-player-mplayer-parameters' contains ``slave''.  If you're using
+mpg321, there is a module called emms-player-mpg321-remote.el.  To use
+it, simply add the following lines to your configuration:
 
 (require 'emms-player-mpg321-remote)
 (push 'emms-player-mpg321-remote emms-player-list)
 
 Finally, if you are using mpd, no special config is needed.
 
-Seeking works through the following functions :
+   Seeking works through the following functions:
 
 `emms-seek' which takes a negative or positive amount of seconds.
 `emms-seek-forward' which seeks ten seconds forward.
 `emms-seek-backward' which seeks ten seconds backward.
 
+
 * Using libtag for reading tags
 ===============================
 
 There is a way to read tags using Libtag as your backend for
-emms-info. However, since it requires a binary file (source code
-provided with EMMS), it isn't enabled by default. To compile it, type
-"make emms-print-metadata". To install it, either put
-emms-print-metadata in your $PATH, or add emms directory to Emacs'
-exec-path. Since, libtag overwrites most of the usual methods for
+emms-info.  However, since it requires a binary file (source code
+provided with EMMS), it isn't enabled by default.  To compile it, type
+``make emms-print-metadata''.  To install it, either put
+emms-print-metadata in your $PATH, or add EMMS' directory to Emacs'
+exec-path.  Since libtag overwrites most of the usual methods for
 providing info, it's best to keep it as the only function in
-`emms-info-functions'. Here's a way to do so:
+`emms-info-functions'.  Here's a way to do so:
 
 (require 'emms-info-libtag)
 (setq emms-info-functions '(emms-info-libtag))
@@ -171,12 +177,13 @@ providing info, it's best to keep it as the only function in
 * EMMS, Emms, emms, or what?
 ============================
 
-In various contexts, this program is called EMMS, Emms or emms. Those
-are all correct, and which you use is a matter of personal preference.
-EMMS highlights the acronym character of the name. Emms is akin to
-Emacs and Gnus, ignoring that Emms is pronounce ee-em-em-es, and not a
-single name. emms is highlighting that emms is a case-sensitive file
-name and Emacs Lisp command.
+In various contexts, this program is called EMMS, Emms or emms.  Those
+are all correct, and which one you use is a matter of personal
+preference.  EMMS highlights the acronym character of the name.  Emms
+is akin to Emacs and Gnus, ignoring that Emms is pronounced
+ee-em-em-es, and not a single name.  emms is highlighting that emms is
+a case-sensitive file name and Emacs Lisp command.
+
 
 * Getting help
 ==============
@@ -186,7 +193,8 @@ visit http://lists.gnu.org/mailman/listinfo/emms-help.  If you are
 familiar with the Gmane service, there is a Gmane newsgroup which
 mirrors this mailing address at gmane.emacs.emms.user.
 
-Emms also has a website at <http://www.gnu.org/software/emms/>.
+   Emms also has a website at <http://www.gnu.org/software/emms/>.
+
 
 * License
 =========