diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/Makefile | 10 | ||||
| -rw-r--r-- | doc/emms.texinfo | 2419 | ||||
| -rw-r--r-- | doc/fdl.texi | 451 | ||||
| -rw-r--r-- | doc/gpl.texi | 725 |
4 files changed, 3605 insertions, 0 deletions
diff --git a/doc/Makefile b/doc/Makefile new file mode 100644 index 0000000..cccdff3 --- /dev/null +++ b/doc/Makefile @@ -0,0 +1,10 @@ +# Don't delete if make is interrupted +.PRECIOUS: %.info %.html + +all: emms.info + +%.info: %.texinfo + makeinfo --no-split $< + +%.html: %.texinfo + makeinfo --html --no-split $< diff --git a/doc/emms.texinfo b/doc/emms.texinfo new file mode 100644 index 0000000..5c9b5b0 --- /dev/null +++ b/doc/emms.texinfo @@ -0,0 +1,2419 @@ +\input texinfo @c -*-texinfo-*- +@c %**start of header +@setfilename emms.info +@settitle The Emms Manual +@c %**end of header + +@c History: The Emms manual was almost entirely rewritten for the +@c release of Emms version 2. + +@c As a rule, modules which are stable enough to be included into the +@c `emms-all' setup level should be documented. That is, any feature +@c which is considered stable should be included. + +@dircategory Emacs +@direntry +* Emms: (emms). The Emacs Multimedia System +@end direntry + +@copying + @copyright{} 2004, 2005, 2006, 2007 + Free Software Foundation, Inc. +@quotation +Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.1 or +any later version published by the Free Software Foundation; with no +Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A +copy of the license is included in the section entitled "GNU Free +Documentation License". +@end quotation +@end copying + +@c For printed material +@titlepage +@title The Emms Manual + +@page +@vskip 0pt plus 1filll +@insertcopying +@end titlepage + +@contents +@c END For printed material + +@ifnottex +@node Top, Introduction, (dir), (dir) +@top Emms Manual + +This is the Manual for the Emacs Multimedia System +@menu +Starting out +* Introduction:: Introduction to Emms. +* Installation:: How to install Emms on your System. +* Simple Setup:: Quick, basic default Emms setup. +* Configuration:: More detailed setup and configuration. +* Quickstart Guide:: First steps with EMMS for new users. +* Getting Help:: Where to get help with Emms and make suggestions. + +Emms basics +* Basic Commands:: How to control Emms with ease. +* The Core File:: The inner core of Emms. +* Sources:: Sources for playlists-creation. +* Simple Players:: Some simple players. +* Playlists:: How Emms organizes media. + +Advanced Features +* Track Information:: More narrative track descriptions. +* Interactive Playlists:: Interactive Playlists. +* Markable Playlists:: Allow tracks to be marked. + +Modules and Extensions +* The Browser:: Advanced metadata browsing. +* Sorting Playlists:: Sorting the order of the tracks. +* Persistent Playlists:: Restoring playlists on emacs startup. +* Editing Tracks:: Editing track information from within Emms. +* Emms Mode Line:: Emms information on the mode line. +* Music Player Daemon:: Interface to Music Player Daemon. +* Streaming Audio:: Interface to streaming audio. +* Lyrics:: Displaying lyrics synchronously. +* Volume:: Changing the volume. +* Last.fm:: Interact with http://www.last.fm's services. +* Extending Emms:: How to define new players and modules. + +Copying and license +* Copying:: The GNU General Public License gives you permission to + redistribute Emms on certain terms; it also explains + that there is no warranty. +* The GNU FDL:: The license for this documentation. + +Indices +* Concept Index:: +* Function Index:: +* Variable Index:: +* Keybinding Index:: + +@detailmenu +--- The Detailed Node Listing --- + +Here are some other nodes which are really inferiors of the ones +already listed, mentioned here so you can get to them in one step: + +Installation +* Compiling Emms:: Compiling Emms into Byte-Code. + +The Core File +* User Variables:: Variables for the user to tweak. +* Hooks:: Hooks for important Emms functions. +* Core Functions:: Providing the basic functionality of Emms. + +Track Information +* Defining Info Methods:: Defining new info methods. + +Last.fm +* Submitting track informations:: How to submit track information to last.fm. +* Last.fm radio:: How to listen to last.fm radio. + +Extending Emms +* New Player:: How to define a new player. +* Simple Player for `play':: Example player using @command{play}. +* More Complex Player:: Example of a complex player using @command{mpg321}. +@end detailmenu +@end menu + +@end ifnottex + + +@node Introduction +@chapter Introduction + +@cindex introduction + +Emms is the Emacs Multi-Media System. It tries to be a clean and small +application to play multimedia files from Emacs using external +players. Many of its ideas are derived from +@uref{http://www.nongnu.org/mp3player, MpthreePlayer}, but it tries to +be more general and more clean. + +This manual tries to be the definitive source of information about +Emms, an online version of the manual is available at: +@uref{http://www.gnu.org/software/emms/manual/}. + +The basic functionality of Emms consists of three parts: The core, the +sources, and the players. + +The core resides in @file{emms.el}, and provides a simple playlist and the +basic functionality to use all the other features of Emms. It provides +the common user commands and interfaces for other parts. It thinks in +tracks, where a track is the combination of a type and a name - e.g. +the track type 'file has a name that is the file name. Other track +types are possible. + +To get to tracks, the core needs sources. The file @file{emms-source-file.el} +provides simple sources to interact with the file system. + +When Emms finally has the sources in the playlist, it needs a player +to play them. @file{emms-player-simple.el} defines a few useful players, and +allows you to define your own in a very simple way. + +The way Emms works is easy to customize with your own code or by using +`M-x customize'. + +@node Installation +@chapter Installation + +@cindex installation + +You need to put all the .el files of emms in a directory in your +load-path. For example, if you put all those files into ~/elisp/emms/, +then in your ~/.emacs, you should do: + +@lisp +(add-to-list 'load-path "~/elisp/emms/") +@end lisp +@noindent + +@menu +* Compiling Emms:: Compiling Emms into Byte-Code. +@end menu + +@node Compiling Emms +@section Compiling Emms + +@cindex compiling + +If you are using XEmacs, you will need to edit @file{Makefile} as +follows before continuing. + +@example +EMACS=xemacs +SITEFLAG=-no-site-file +@end example + +You can byte-compile Emms by first entering the directory containing the +Emms source code, followed by invoking: + +@command{make} + +Which will byte compile Emms. You can then invoke: + +@command{make install} + +Which will install Emms into your Emacs directories (provided you have +the appropriate permissions to do so on your system). + +Note that Emms is a light-weight and agile program, you can therefore +run Emms just fine without byte compiling it. + +@node Simple Setup +@chapter Simple Setup + +@cindex simple setup +@cindex setting up Emms +@cindex quick setup + +After adding the location of the Emms code to the @var{load-path} +variable, see @xref{Installation}. We invoke the following using the +`emms-setup' feature which allows for quick and simple Emms setup. + +@lisp +(require 'emms-setup) +(emms-standard) +(emms-default-players) +@end lisp + +After which Emms is set-up and ready to go! + +The above will setup Emms with standard features (interactive +playlists, audio track tag reading etc.) and a default list of players +(ogg, mp3, mplayer etc.). + +The `emms-setup' feature is provided by the file +@file{emms-setup.el}. It is essentially a collection of shortcuts for +setting up Emms quickly and simply. Everything you can do with +`emms-setup' can also be done manually. + +We use `emms-setup' by calling one of the setup functions. Each of the +functions sets up Emms to include a number of features. + +@defun emms-minimalistic +An Emms setup script. +Invisible playlists and all the basics for playing media. +@end defun + +@defun emms-standard +An Emms setup script. +Everything included in the @code{emms-minimalistic} setup, the Emms +interactive playlist mode and reading information from tagged +audio files. +@end defun + +@defun emms-all +An Emms setup script. +Everything included in the @code{emms-standard} setup and adds all the +stable features which come with the Emms distribution. +@end defun + +@defun emms-devel +An Emms setup script. +Everything included in the @code{emms-all} setup and adds all of the +features which come with the Emms distribution regardless of if they +are considered stable or not. Use this if you like living on the +edge. +@end defun + +`emms-setup' also comes with a convenience function to set a default +list of media players. + +@defun emms-default-players +Set @var{emms-player-list} to @var{emms-setup-default-player-list}. +@end defun + +It is also worth noting that you can write your own Emms setup +functions like the above by looking at the existing function +definitions in @file{emms-setup.el}. + +@node Configuration +@chapter Configuration + +@cindex Configuration + +This chapter discusses the configuration of Emms in more detail. + +The following code fragment provides a minimal Emms setup without +using the layer of `emms-setup'. It can maybe be used to better +understand the internals of Emms. You can see how Emms needs to know +about players (these are defined in `emms-player-simple') and about +sources for tracks (trivial file system based sources, such as this +`emms-directory-tree', are defined in `emms-source-file'). + +@lisp +(require 'emms-player-simple) +(require 'emms-source-file) +(require 'emms-source-playlist) +(setq emms-player-list '(emms-player-mpg321 + emms-player-ogg123 + emms-player-mplayer)) +@end lisp + +For a discussion on how to define additional players, see @xref{Simple +Players}. + +Much of the behaviour of Emms can be changed by setting +variables. For example: + +@lisp +(setq emms-info-asynchronously nil) +(setq emms-playlist-buffer-name "*Music*") +@end lisp + +The first @code{setq} turns off the asynchronous updating of info tags. The +second sets the default name of the Emms playlist buffer. + +Another way to change Emms variables is to use the M-x +@command{customize} mechanism provided by Emacs. + +@menu +* Finding files and speed:: Finding files quickly or portably. +@end menu + +@node Finding files and speed +@section Finding files and speed + +@cindex files +@cindex speed + +Emms needs to traverse directories in order to find playable +media. The default method Emms uses to achive this is +@code{emms-source-file-directory-tree-internal} as defined in +@file{emms-source-file.el}. The above method is written portably and +will always work, but might be too slow if we want to load several +hundred tracks (or more). + +@file{emms-source-file.el} defines another method for finding files, +@code{emms-source-file-directory-tree-find} which uses +GNU/find. @code{emms-source-file-directory-tree-find} is usually an +order of magnitude faster, but of course will not work if you do not +have GNU/find installed. + +The method Emms will use is defined in the customisable variable +@var{emms-source-file-directory-tree-function}. + +@node Quickstart Guide +@chapter Quickstart Guide + +This chapter demonstrates how to setup EMMS so that you can start +listening to your music without having to read all of the documentation +first. + +The first thing you have to do is telling Emacs where the sources of +EMMS are located. Let's say you have them in @file{~/elisp/emms/}. So +add this line to your @file{.emacs}. + +@lisp +(add-to-list 'load-path "~/elisp/emms") +@end lisp + +Further informations about installing EMMS can be found in the +installation chapter, @xref{Installation}. + +Let's say you want to enable all features which are considered stable by +the EMMS developers. To achieve this you invoke the @code{emms-all} +setup function by adding the following three lines to your @file{.emacs}. + +@lisp +(require 'emms-setup) +(emms-all) +(emms-default-players) +@end lisp + +The function @code{emms-default-players} in the last line sets up the +list of default players. The list contains lightweight specialized +players like ogg123 or mpg321 and we-play-everything-players like +mplayer or xine. To be sure that emms can play all your music you should +check that the needed players are installed. + +Further informations about the several setup scripts can be found in the +simple setup chapter, @xref{Simple Setup}. + +Of course EMMS tries to display the tags of the music files you listen +to. For this to work you have to make sure that the appropriate programs +are installed. For mp3 files you need `mp3info', and for ogg files you +need `ogginfo'. + +The last thing to do is to tell EMMS the root directory of our music +collection. Let's say all your music is in @file{~/Music} or in +subdirectories thereof. + +@lisp +(setq emms-source-file-default-directory "~/Music/") +@end lisp + +OK, now we've set up EMMS. Reload your @file{.emacs} or restart Emacs to +let the changes have an effect. + +Now we will add all our music to a playlist by invoking @kbd{M-x +emms-add-directory-tree RET ~/Music/ RET}. We do this because then EMMS +will read the tags of all your music files and cache them. This is +required for the browser, @xref{The Browser}. + +To switch to the playlist buffer, invoke @kbd{M-x emms-playlist-mode-go} +or simply @kbd{M-x emms}. You can see that most tracks are displayed +with their file name, but track by track the filename gets replaced with +the artist and track name of the file's tag. + +Hit @kbd{RET} on a track to start playback. + +Now you can start exploring EMMS. It's probably best to begin with the +basic commands (@pxref{Basic Commands}), the interactive playlists +(@pxref{Interactive Playlists}), and the browser (@pxref{The Browser}). + +@node Getting Help +@chapter Getting Help + +@cindex mailing list +@cindex website + +If you have a bug to report, need help, or wish to suggest a feature, +please feel free to use the Emms mailing list. The address of the list +is emms-help@@gnu.org. To subscribe to it, visit +@url{http://lists.gnu.org/mailman/listinfo/emms-help}. + +If you are familiar with the Gmane service, there is a Gmane newsgroup +which mirrors this mailing address at gmane.emacs.emms.user. + +Emms also has a website at @url{http://www.gnu.org/software/emms/}. + +@node Basic Commands +@chapter Basic Commands + +@cindex basic commands +@cindex commands, basic + +Before you can use the interface commands, you need a playlist to +start with. The following commands allow you to add to the current +playlist from different sources: + +Note that the commands with the ``emms-add-'' prefix add the source to +the playlist but do not start playing it immediately. Conversely, the +commands with the ``emms-play-'' prefix begin playing the track +immediately. + +@defun emms-play-file file +A source for a single file - either @var{file}, or queried from the +user. If called with a prefix the file will be added like +@command{emms-add-file}. +@end defun +@defun emms-add-file file +A source for a single file - either @var{file}, or queried from +the user. If called with a prefix the file will be played like +@command{emms-play-file}. +@end defun +@defun emms-play-directory dir +A source for a whole directory tree - either @var{dir}, or queried +from the user. +@end defun +@defun emms-add-directory dir +A source for a whole directory tree - either @var{dir}, or queried +from the user. +@end defun +@defun emms-play-directory-tree dir +A source for multiple directory trees - either @var{dir}, or the +value of @var{emms-source-file-default-directory}. +@end defun +@defun emms-add-directory-tree dir +A source for multiple directory trees - either @var{dir}, or the +value of @var{emms-source-file-default-directory}. +@end defun +@defun emms-play-url url +A source for an @var{url} - for example, for streaming. +@end defun +@defun emms-add-url url +A source for an @var{url} - for example, for streaming. +@end defun +@defun emms-play-playlist playlist +A source for the M3u or PLS playlist format from the file @var{playlist}. +@end defun +@defun emms-add-playlist playlist +A source for the M3u or PLS playlist format from the file @var{playlist}. +@end defun +@defun emms-play-find dir regexp +A source that will find files in @var{dir} or +@var{emms-source-file-default-directory} which match @var{regexp}. +@end defun +@defun emms-add-find dir regexp +A source that will find files in @var{dir} or +@var{emms-source-file-default-directory} which match @var{regexp}. +@end defun + +The basic functionality of Emms is just to play music without being +noticed. It provides a few commands to skip the current track and +such, but other than that it doesn't show up. Emms provides the +following basic user commands (which you might want to bind to +keystrokes): + +@defun emms-start +Start playing the current playlist +@end defun +@defun emms-stop +Stop playing +@end defun +@defun emms-next +Start playing the next track in the playlist +@end defun +@defun emms-previous +Start playing previous track in the playlist +@end defun +@defun emms-shuffle +Shuffle the current playlist. This uses +@var{emms-playlist-shuffle-function}. +@end defun +@defun emms-sort +Sort the current playlist. This uses +@var{emms-playlist-sort-function}. +@end defun +@defun emms-show &optional insertp +Describe the current Emms track in the minibuffer. If @var{insertp} is +non-nil, insert the description into the current buffer instead. This +function uses @var{emms-show-format} to format the current track. +@end defun + +@node The Core File +@chapter The Core File + +@cindex core file +@cindex heart of Emms +@cindex primitive functions + +The core file @file{emms.el} provides the all basic functions for +playing music, generating playlists and defining players. + +@menu +* User Variables:: Variables for the user to tweak. +* Hooks:: Hooks for important Emms functions. +* Core Functions:: Providing the basic functionality of Emms. +@end menu + +@node User Variables +@section User Variables + +@cindex user variables +@cindex options + +The core file defines a number of user variables. + +@defopt emms-player-list +A list of players Emms can use. You need to set this in order to use +Emms to play media. +@end defopt +@defopt emms-show-format +The format to use for @command{emms-show}. Any "%s" is replaced by +what @var{emms-track-description-function} returns for the currently +playing track. +@end defopt +@defopt emms-repeat-playlist +Non-nil if the Emms playlist should automatically repeat the playlist. +If nil, playback will stop when the last track finishes playing. +@end defopt +@defopt emms-track-description-function +Function for describing an Emms track in a user-friendly way. +@end defopt +@defopt emms-sort-lessp-function +A function that compares two tracks, and returns non-nil if the first +track should be sorted before the second (see also @code{sort}). +@end defopt + +@node Hooks +@section Hooks + +@cindex hooks +@cindex adding functionality + +The core file provides hook variables for the basic functionality of +Emms. + +@defopt emms-player-started-hook +A hook run when an Emms player started playing. +@end defopt +@defopt emms-player-stopped-hook +A hook run when an Emms player stopped playing. See also +@var{emms-player-finished-hook}. +@end defopt +@defopt emms-playlist-source-inserted-hook +Hook run when a source got inserted into the playlist. The buffer is +narrowed to the new tracks. +@end defopt +@defopt emms-playlist-selection-changed-hook +Hook run after another track is selected in the Emms playlist. +@end defopt +@defopt emms-playlist-cleared-hook +Hook run after the current Emms playlist is cleared. This happens both +when the playlist is cleared and when a new buffer is created for it. +@end defopt +@defopt emms-player-finished-hook +Hook run when an Emms player finishes playing a track. Please pay +attention to the differences between @var{emms-player-finished-hook} +and @var{emms-player-stopped-hook}. The former is called only when the +player is stopped interactively; the latter, only when the player +actually finishes playing a track. +@end defopt +@defopt emms-player-paused-hook +Hook run when a player is paused or resumed. Use +@var{emms-player-paused-p} to find the current state. +@end defopt + +@node Core Functions +@section Core Functions + +@cindex core functions +@cindex basic functions + +The core file also defines all the functions important to the basic +use of Emms. + +There are functions which deal with movement in the playlist. + +@defun emms-next-noerror +Start playing the next track in the Emms playlist. Unlike +@code{emms-next}, this function doesn't signal an error when called at +the end of the playlist. This function should only be called when no +player is playing. This is a good function to put in +@code{emms-player-finished-hook}. +@end defun +@defun emms-playlist-next +Move to the previous track in the current buffer. +@end defun +@defun emms-playlist-previous +Move to the previous track in the current buffer. +@end defun +@defun emms-random +Jump to a random track. +@end defun +@defun emms-toggle-repeat-playlist +Toggle whether emms repeats the playlist after it is done. See +@var{emms-repeat-playlist}. +@end defun +@defun emms-toggle-repeat-track +Toggle whether emms repeats the current track. See +@var{emms-repeat-track}. +@end defun + +Some functions deal with the getting and setting track information. + +@defun emms-track type name +Create a track with type @var{type} and name @var{name}. +@end defun +@defun emms-track-type track +Return the type of @var{track}. +@end defun +@defun emms-track-name track +Return the name of @var{track}. +@end defun +@defun emms-track-get name track &optional inexistent +Return the value of @var{name} for @var{track}. If there is no value, +return @var{default} (or nil, if not given). +@end defun +@defun emms-track-set track name value +Set the value of @var{name} for @var{track} to @var{value}. +@end defun +@defun emms-track-description track +Return a description of @var{track}. This function uses +@var{emms-track-description-function}. +@end defun +@defun emms-player-for track +Return an Emms player capable of playing @var{track}. This will be the +first player whose PLAYABLEP function returns non-nil, or nil if no +such player exists. +@end defun +@defun emms-playlist-current-selected-track +Return the currently selected track in the current playlist. +@end defun + +There are also functions which deal with the playing itself. + +@defun emms-player-start track +Start playing @var{track}. +@end defun +@defun emms-player-stop +Stop the currently playing player. +@end defun +@defun emms-player-stopped +Declare that the current Emms player is finished. +This should only be done by the current player itself. +@end defun +@defun emms-seek seconds +Seek the current player @var{seconds} seconds. This can be a floating +point number for sub-second fractions. It can also be negative to +seek backwards. +@end defun +@defun emms-seek-forward +Seek ten seconds forward. +@end defun +@defun emms-seek-backward +Seek ten seconds backward. +@end defun + +For more basic commands defined in the core file see @xref{Basic +Commands}. + +@node Sources +@chapter Sources + +@cindex Sources + +Sources allow Emms to add and play tracks. Emms comes with a number of +sources of its own. Sources are designed so that creating new ones +will be easy. + +For examples of Emms sources for files and directories see +@file{emms-source-file.el}. + +@defopt emms-source-file-default-directory +The default directory to look for media files. +@end defopt +@defun emms-play-find +Play all files in @var{emms-source-file-default-directory} that match +a specific regular expression. +@end defun +@defun emms-source-file &optional file +An Emms source for a single file - either @var{file}, or queried from the +user. +@end defun +@defun emms-source-files files +An Emms source for a list of @var{files}. +@end defun +@defun emms-source-directory &optional dir +An Emms source for a whole directory tree - either @var{dir}, or queried +from the user +@end defun +@defun emms-source-directory-tree & optional dir +An Emms source for multiple directory trees - either @var{dir}, or the +value of @var{emms-source-file-default-directory}. +@end defun +@defun emms-source-playlist file +An EMMS source for playlists. See `emms-source-playlist-formats' for +a list of supported formats. +@end defun +@defun emms-source-playlist-native file +An EMMS source for a native EMMS playlist file. +@end defun +@defun emms-source-playlist-m3u file +An EMMS source for an m3u playlist file. +@end defun +@defun emms-source-playlist-pls file +An EMMS source for a pls playlist file. +@end defun +@defun emms-source-find &optional dir regex +An Emms source that will find files in @var{dir} or +@var{emms-source-file-default-directory} that match @var{regexp}. +@end defun +@defun emms-source-file-directory-tree &optional dir +Return a list of all files under @var{dir} which match @var{regex}. +@end defun +@defun emms-source-dired +Play all marked files of a dired buffer +@end defun +@defun emms-source-file-regex +Return a regexp that matches everything any player (that supports +files) can play. +@end defun +@defun emms-locate regexp +Search for @var{regexp} and display the results in a locate buffer +@end defun + +@node Simple Players +@chapter Simple Players + +@cindex players, simple + +@defmac define-emms-simple-player name types regex command &rest args +Define a simple player with the use of `emms-define-player'. +@var{name} is used to construct the name of the function like +emms-player-@var{name}. @var{types} is a list of track types +understood by this player. @var{regex} must be a regexp that matches +the filenames the player can play. @var{command} specifies the command +line argument to call the player and @var{args} are the command line +arguments. +@end defmac + +For a discussion on how to define new players see @xref{New Player}. + +@defun emms-player-simple-stop +Stop the currently playing process, if indeed there is one. +@end defun +@defun emms-player-simple-start filename cmdname params +Starts a process playing @var{filename} using the specified @var{cmdname} with +the specified @var{params}. +@end defun +@defun emms-player-simple-sentinel proc str +Sentinel for determining the end of process for the process @var{proc} +and the sentinel string @var{str}. +@end defun + +@node Playlists +@chapter Playlists + +@cindex organizing tracks and media + +Emms uses Emacs buffers to store the media tracks for playing. We call +one such buffer a ``playlist buffer'' or an ``Emms playlist +buffer''. Emms then proceeds to play the media tracks in the buffer +from top to bottom until the end of the playlist. + +The name of the playlist buffer is defined in the variable +@var{emms-playlist-buffer-name} and is set to be an invisible Emacs +buffer by default. You can change to any name you want. For an example +configuration see @xref{Configuration}. + +You can create any number of playlist buffers you wish. At any time +Emms has a single ``current'' buffer through which it proceeds track +by track. + +@defun emms-playlist-new &optional name +Create a new playlist buffer. +The buffer is named @var{name}, but made unique. @var{name} defaults +to `emms-playlist-buffer-name'. If called interactively, the new +buffer is also selected. +@end defun + +@defun emms-playlist-save &optional format file +Store the current playlist to FILE as the type FORMAT. The default +format is specified by `emms-source-playlist-default-format'. +@end defun + +The current Emms playlist buffer is stored in the variable +@var{emms-playlist-buffer}. + +@node Track Information +@chapter Track Information + +@cindex track information +@cindex info tags + +Emms is distributed with two predefined methods for retrieving info, +provided by @file{emms-info-mp3info.el} and +@file{emms-info-ogginfo.el}. Both packages are front-ends for +command-line tools. Ogg track information is retrieved using the +@uref{http://directory.fsf.org/audio/ogg/vorbistools.html, ogginfo} +software. Likewise, mp3 track information is available using +@uref{http://www.ibiblio.org/mp3info/, mp3info}. + +Automatic track information retrieval is enabled by default in the +`emms-standard', `emms-all' and `emms-devel' setup levels provided by +@file{emms-setup.el}. For more information about @file{emms-setup.el} +see @xref{Simple Setup}. + +If you would like to know how Emms track retreival works and how we +can define new methods for track retrieval see @xref{Defining Info +Methods}. + +There are a number of user variables which control the behaviour of +`emms-info'. + +@defopt emms-info-auto-update +Non-nil when Emms should update track information if the file changes. +This will cause hard drive activity on track loading. If this is too +annoying for you, set this variable to nil. +@end defopt +@defopt emms-info-asynchronously +Non-nil when track information should be loaded asynchronously. This +requires the feature `later-do' which is provided by the file +@file{later-do.el}, which should come with Emms. +@end defopt +@defopt emms-info-functions +Functions which add information to tracks. Each is called with a +track as argument. +@end defopt + +@menu +* Defining Info Methods:: Defining new info methods. +@end menu + +@node Defining Info Methods +@section Defining Info Methods + +@cindex defining info methods + +An info method essentially consists of a function which given an Emms +track returns the appropriate info for that track. + +We can for example look at the predefined method for retrieving +information about audio tracks in the Ogg format. + +The function @command{emms-info-ogginfo} provided by +@file{emms-info-ogginfo.el} accepts an Emms track as a single +argument and returns the appropriate information string. + +We then register our info function with Emms by adding it to the +@var{emms-info-functions} list. The function will then be called at +the right time to provide track info. + +@lisp +(add-to-list 'emms-info-functions 'emms-info-ogginfo) +@end lisp + +@node Interactive Playlists +@chapter Interactive Playlists + +@cindex Interactive Playlists + +Emms provides a visual, interactive playlist mode as well as the +ability to use playlists without ever looking at then. This visual, +interactive mode is called the `emms-playlist-mode' and is defined in +@file{emms-playlist-mode.el}. + +The interactive playlist mode is enabled by default in the +`emms-standard', `emms-all' and `emms-devel' setup levels. For more +information about Emms setup levels see @xref{Simple Setup}. + +@defun emms-playlist-mode-go +Switch to the current emms-playlist buffer and use emms-playlist-mode. +@end defun + +If you wish to make this the default EMMS playlist mode, add the +following to your @file{.emacs}. + +@lisp +(setq emms-playlist-default-major-mode 'emms-playlist-mode) +@end lisp + +The interactive playlist buffer shows the tracks in the current Emms +playlist in the order in which they will be played. The current track +will be highlighted. + +When in the interactive playlist mode we can perform different actions +on the current playlist. + +@table @kbd +@item a +@findex emms-playlist-mode-add-contents +Add files in the playlist at point to the current playlist buffer. +If we are in the current playlist, make a new playlist buffer and +set it as current. +@item b +@findex emms-playlist-set-playlist-buffer +Set the current playlist buffer. +@item n +@findex emms-next +Start playing the next track in the playlist. +@item p +@findex emms-next +Start playing the previous track in the playlist. +@item s +@findex emms-stop +Stop playing. +@item P +@findex emms-pause +Pause. +@item > +@findex emms-seek-forward +Seek ten seconds forward. +@item < +@findex emms-seek-backward +Seek ten seconds backward. +@item f +@findex emms-show +Describe the currently playing track in the minibuffer. +@item c +@findex emms-playlist-mode-center-current +Display the current track in the center of the screen. +@item RET +@findex emms-playlist-mode-play-current-track +Start playing the track under point. Note that this is also available +with @kbd{<mouse-2>}. +@item SPC +@findex scroll-up +Scroll up a near full page. +@item M-< +@findex emms-playlist-mode-first +Go to the first track in the playlist. @kbd{M->} completes this +command by going to the last track in the playlist using +@command{emms-playlist-mode-last}. +@item r +@findex emms-random +Go to a randomly selected track in the playlist. +@item q +@findex bury-buffer +Put the interactive playlist buffer at the end of the list of all +buffers. +@item C-x C-s +@findex emms-playlist-save +Save the current playlist buffer to a file. +@item ? +@findex describe-mode +Describe the mode. +@end table + +We can also edit the playlist using familiar GNU/Emacs commands: + +@table @kbd +@item C-k +@findex emms-playlist-mode-kill-track +Remove the track under point from the playlist buffer. Also available +using the @kbd{d} key. +@item C-y +@findex emms-playlist-mode-yank +See the command @command{yank} +@item C-w +@findex emms-playlist-mode-kill +See the command @command{kill-region} +@item M-y +@findex emms-playlist-mode-yank-pop +See the command @command{yank-pop}. +@item C-j +@findex emms-playlist-mode-insert-newline +Insert a newline at point. +@end table + +We can use the regular GNU/Emacs killing and yanking commands to move +and copy tracks in between playlist buffers. We can use the same +commands to insert arbitrary text into the playlist buffers together +with the playlist tracks. Text which is not a track is ignored by the +program and can therefore be used to include titles and annotations +within the playlist. + +@node Markable Playlists +@chapter Markable Playlists + +@cindex Markable Playlists + +The Markable Playlists provided by the file @file{emms-mark.el} are an +alternative to the default interactive playlists, @xref{Interactive +Playlists}. They allow marking tracks with keybindings familiar to users +of dired. + +To enable the Markable Playlists you have to add + +@lisp +(require 'emms-mark) +@end lisp + +to your @file{.emacs}. Then you can activate @command{emms-mark-mode} by +executing @command{M-x emms-mark-mode} in a playlist buffer. You can +return to the default interactive playlist mode with @command{M-x +emms-mark-mode-disable}. + +If you wish to make this the default EMMS playlist mode, add the +following to your @file{.emacs}. + +@lisp +(setq emms-playlist-default-major-mode 'emms-mark-mode) +@end lisp + +@table @kbd +@item m +@findex emms-mark-forward +Marks the current track and sets point one line forward. If a prefix +argument ARG is given, it will mark the next ARG tracks and set point +accordingly. A negative argument marks backward. +@item U +@findex emms-mark-unmark-all +Unmarks all tracks in the playlist. +@item t +@findex emms-mark-toggle +Toggles mark on the current track. +@item u +@findex emms-mark-unmark-forward +Unmarks same way as @command{emms-mark-forward} marks. +@item % m +@findex emms-mark-regexp +Marks all tracks in the playlist matching the given regular +expression. A prefix argument means to unmark them instead. +@end table + +When tracks are marked you can operate on them: + +@table @kbd +@item D +@findex emms-mark-delete-marked-tracks +Deletes the marked tracks from the playlist. +@item K +@findex emms-mark-kill-marked-tracks +Deletes the marked tracks from the playlist and places them in the +kill-ring, so that you can @command{yank} in into another playlist. +@item W +@findex emms-mark-copy-marked-tracks +Adds the marked tracks to the kill-ring, so that you can @command{yank} +them into another playlist. +@end table + +emms-mark is also intent to provide a way for user to select tracks +for other command to operate on them. Currently, +@file{emms-tag-editor.el} used the emms-mark to edit tags of selected +tracks. Two function is useful for elisp programer to handle marked +tracks. + +@defun emms-mark-do-with-marked-track +This function take a function to perform on all marked tracks. A +optional argument `move-flag' to tell the function to move forward +line after calling given function. If the given function didn't change +position, the second argument should set to non-nil. +@end defun + +@defun emms-mark-mapcar-marked-track +This function is very similar to `emms-mark-do-with-marked-track' +except it collects result of given function (that's why named with +`mapcar'). +@end defun + +@node Extending Emms +@chapter Extending Emms + +@cindex new players +@cindex defining players +@cindex new players, defining + +Emms introduces a high abstraction layer for playing music so you can +customise it to your needs. + +@menu +* New Player:: How to define a new player. +* Simple Player for `play':: An example player using @command{play}. +* More Complex Player:: Example of a complex player using @command{mpg321}. +@end menu + +@node New Player +@section New Player + +@cindex new player +@cindex defining new players + +The file @file{emms-player-simple.el} defines some easy players to +start with, but it shouldn't be hard to provide a function for your +favourite player. We will start with an easy example that shows how +we can use the @command{play} command under Unix to play our WAV files. + +@node Simple Player for `play' +@section Simple Player for `play' + +@cindex simple player +@cindex primitive player +@cindex basic player + +Play is a very easy command line player for various format. If you +want your emms to play WAV files just put the following lines in you +@file{.emacs}: + +@lisp +(require 'emms-player-simple) +(define-emms-simple-player play '(file) "\\.wav$" "play") +@end lisp +@noindent + +Huh! Wasn't that easy? + +The macro function @command{define-emms-simple-player} takes a minimum +of three arguments. The first argument (@emph{play} in our example) +defines the name of the player. It's used to name the player +functions. The second is a regexp, that defines which files to play +with our player. @emph{\\.wav$} matches any filename ending with a dot +and the string wav. The last argument is the actual command line +command we use to play our files. You can also add the path but we +just assume that the command is in your path. All arguments you add to +these three are optional. They define the command line arguments you +want to add to your argument. If you want to hear the wav file of your +favourite artist in the most possible volume use the following line: + +@lisp +(require 'emms-player-simple) + +(define-emms-simple-player play + '(file) + "\\artist-*.wav$" + "play" + "--volume=100") +@end lisp +@noindent + +Please notice that you have to add the arguments as strings! + +The command line tool you use for @command{define-emms-simple-player} +has to take one song as argument and stop after playing that +particular song. For any other concept you will need to customise +emms a bit more... + +@node More Complex Player +@section More Complex Player + +@cindex complex player +@cindex advanced player + +The most players you use will be simple players so you don't need to +read this chapter. But if you are curious how you can use (almost) every +player in emms read further... + +In this chapter we will use mpg321 to construct a player that +actually can pause a track, restart it and show rest time. We won't +implement all of that, but after that chapter you will know how to +define it. + +The command @command{define-emms-simple-player} is just a abstraction +layer for @command{define-emms-player}, which is a little bit more +complicated but much more powerful! + +@lisp +(define-emms-player "emms-mpg321-remote" + :start 'emms-mpg321-remote-start + :stop 'emms-mpg321-remote-stop + :playablep 'emms-mpg321-remote-playable-p) +@end lisp +@noindent + +So, that is almost all! @command{define-emms-player} takes a minimum +of three arguments. The first is the name of the player. The rest are +methods with functions to call. Three methods are required: start, +stop and playable. Start says Emms how to start a track (sic!), stop +how to stop a player and playablep should return non-nil if the player +can play the track. + +So we just need these three functions to get our mpg321-remote: + +First we code the start function. We will check if there's a open +process and start one otherwise. Then we send a string to the process +with the filename and set a filter. + +@lisp +(defun emms-mpg321-remote-start () + (unless (get-process ``mpg321-remote'') + (setq emms-mpg321-remote-process + (start-process "mpg321-remote-process" + "*mpg321*" "mpg321" "-R" "abc")) + (process-send-string "mpg321-remote-process" + (concat "l " (emms-track-name track))) + (set-process-filter emms-mpg321-remote-process 'emms-mpg321-remote-filter))) +@end lisp +@noindent + +We need the filter, as mpg321-remote won't quit after playing the +track as the simple player do. We wait until the process sends the +output ``(at-sign)P 0'' (the signal of mpg321 that the song ended) to the +filter and call emms-mpg321-remote-stop. + +@lisp +(defun emms-mpg321-remote-filter (process output) + (when (string-match "(at-sign)P 0" output) + (emms-mpg321-remote-stop))) +@end lisp +@noindent + +@command{emms-mpg321-remote-stop} won't do anything interesting. It +just test if there are other files to play and close the process otherwise. + +@lisp +(defun emms-mpg321-remote-stop () + (unless emms-playlist + (process-send-string "mpg321-remote-process" "Q\n")) +@end lisp +@noindent + +And to make that a playable example I also added +@command{emms-mpg321-remote-playablep}, which I really just steal +from @file{emms-player-simple.el} + +@lisp +(defun emms-mpg321-remote-playablep (track) + "Return non-nil when we can play this track." + (and (eq 'file (emms-track-type track)) +@end lisp +@noindent + +Now we have a ready player and we could add commands like +@command{emms-mpg321-remote-pause} for example. + +@node The Browser +@chapter The Browser + +The Browser allows you to browse the metadata cache and add tracks to +your playlist. It includes a powerful interactive mode. + +The Browser is defined in @file{emms-browser.el} and is included in +the @command{emms-all} setup level. For more information about Emms +setup levels see @xref{Simple Setup}. + +You can also manually add the Browser to your Emms setup by loading it +explicitly with: + +@lisp +(require 'emms-browser) +@end lisp + +To be properly useful, you should do M-x +@command{emms-add-directory-tree} to all the files you own at least +once so that the cache is fully populated. + +@menu +* Browser Interface:: The interactive browser interface. +* Filtering Tracks:: Displaying a subset of the tracks. +* Displaying Covers:: Displaying album covers in the browser interface. +* Changing Looks:: Changing the tree structure, display format and faces. +@end menu + +@node Browser Interface +@section Browser Interface + +The browser interface allows you to display and interact with your +tracks in many different ways. There are a number of ways to start the +browser. + +@defun emms-smart-browse +Display browser and playlist. Toggle between selecting browser, +playlist or hiding both. Tries to behave sanely if the user has +manually changed the window configuration. +@end defun + +@defun emms-browse-by-artist +Display the browser and order the tracks by artist. +@end defun + +@defun emms-browse-by-album +Display the browser and order the tracks by album. +@end defun + +@defun emms-browse-by-genre +Display the browser and order the tracks by genre. +@end defun + +@defun emms-browse-by-year +Display the browser and order the tracks by year. +@end defun + +Once the Browser is displayed you can use it to managed your track +collection and playlists. The Browser is interactive and has its own +keybindings. + +@table @kbd + +@item C-j +@kindex C-j (emms-browser) +@findex emms-browser-add-tracks-and-play +Add all tracks at point, and play the first added track. + +@item RET +@kindex RET (emms-browser) +@findex emms-browser-add-tracks +Add all tracks at point. + +@item SPC +@kindex SPC (emms-browser) +@findex emms-browser-toggle-subitems +Show or hide (kill) subitems under the current line. + +@item 1 +@kindex 1 (emms-browser) +@findex emms-browser-collapse-all +Collapse everything. + +@item 2 +@kindex 2 (emms-browser) +@findex emms-browser-expand-to-level-2 +Expand all top level items one level. + +@item 3 +@kindex 3 (emms-browser) +@findex emms-browser-expand-to-level-3 +Expand all top level items two levels. + +@item 4 +@kindex 4 (emms-browser) +@findex emms-browser-expand-to-level-4 +Expand all top level items three levels. + +@item C +@kindex C (emms-browser) +@findex emms-browser-clear-playlist +Clear the playlist. + +@item E +@kindex E (emms-browser) +@findex emms-browser-expand-all +Expand everything. + +@item d +@kindex d (emms-browser) +@findex emms-browser-view-in-dired +View the current directory in dired. + +@item q +@kindex q (emms-browser) +@findex emms-browser-bury-buffer +Bury the browser buffer. + +@item r +@kindex r (emms-browser) +@findex emms-browser-goto-random +Jump to a random track. + +@item / +@kindex / (emms-browser) +@findex emms-isearch-buffer +Isearch through the buffer. + +@item < +@kindex < (emms-browser) +@findex emms-browser-previous-filter +Redisplay with the previous filter. + +@item > +@kindex > (emms-browser) +@findex emms-browser-next-filter +Redisplay with the next filter. + +@item ? +@kindex ? (emms-browser) +@findex describe-mode +See the Emacs documentation for the function. + +@item C-/ +@kindex C-/ (emms-browser) +@findex emms-playlist-mode-undo +Undo the previous playlist action. + +@item <C-return> +@kindex <C-return> (emms-browser) +@findex emms-browser-add-tracks-and-play +Add all tracks at point, and play the first added track. + +@item <backtab> +@kindex <backtab> (emms-browser) +@findex emms-browser-prev-non-track +Jump to the previous non-track element. + +@item <tab> +@kindex <tab> (emms-browser) +@findex emms-browser-next-non-track +Jump to the next non-track element. + +@item s A +@kindex s A (emms-browser) +@findex emms-browser-search-by-album +Search the collection by album. + +@item s a +@kindex s a (emms-browser) +@findex emms-browser-search-by-artist +Search the collection by artist. + +@item s s +@kindex s s (emms-browser) +@findex emms-browser-search-by-names +Search the collection by names. + +@item s t +@kindex s t (emms-browser) +@findex emms-browser-search-by-title +Search the collection by title. + +@item b 1 +@kindex b 1 (emms-browser) +@findex emms-browse-by-artist +Browse the collection by artist. + +@item b 2 +@kindex b 2 (emms-browser) +@findex emms-browse-by-album +Browse the collection by album. + +@item b 3 +@kindex b 3 (emms-browser) +@findex emms-browse-by-genre +Browse the collection by genre. + +@item b 4 +@kindex b 4 (emms-browser) +@findex emms-browse-by-year +Browse the collection by year. + +@item W a p +@kindex W a p (emms-browser) +@findex emms-browser-lookup-album-on-pitchfork +Lookup the album using Pitchfork. + +@item W a w +@kindex W a w (emms-browser) +@findex emms-browser-lookup-album-on-wikipedia +Lookup the album using Wikipedia. +@end table + +@node Filtering Tracks +@section Filtering Tracks + +If you want to display a subset of your collection (such as a +directory of 80s music, only avi files, etc.) then you can extend the +Browser by defining ``filters''. + +Show everything: + +@lisp +(emms-browser-make-filter "all" 'ignore) +@end lisp + +Set "all" as the default filter: + +@lisp +(emms-browser-set-filter (assoc "all" emms-browser-filters)) +@end lisp + +Show all files (no streamlists, etc): + +@lisp +(emms-browser-make-filter + "all-files" (emms-browser-filter-only-type 'file)) +@end lisp + +Show only tracks in one folder: + +@lisp +(emms-browser-make-filter + "80s" (emms-browser-filter-only-dir "~/Mp3s/80s")) +@end lisp + +Show all tracks played in the last month: + +@lisp +(emms-browser-make-filter + "last-month" (emms-browser-filter-only-recent 30)) +@end lisp + +After executing the above commands, you can use M-x +emms-browser-show-all, emms-browser-show-80s, etc to toggle between +different collections. Alternatively you can use '<' and '>' to cycle +through the available filters. + +The second argument to make-filter is a function which returns t if a +single track should be filtered. You can write your own filter +functions to check the type of a file, etc. + +Show only tracks not played in the last year: + +@lisp +(emms-browser-make-filter "not-played" + (lambda (track) + (not (funcall (emms-browser-filter-only-recent 365) track)))) +@end lisp + +Show all files that are not in the pending directory: + +@lisp +(emms-browser-make-filter + "all" + (lambda (track) + (or + (funcall (emms-browser-filter-only-type 'file) track) + (not (funcall + (emms-browser-filter-only-dir "~/Media/pending") track))))) +@end lisp + +@node Displaying Covers +@section Displaying Covers + +The browser will attempt to display cover images if they're +available. By default it looks for images cover_small.jpg, +cover_med.jpg, etc. Customize @var{emms-browser-covers} to use your +own covers. Note that you'll probably want to resize your existing +covers to particular sizes. Suggested sizes are 100x100 for small, and +200x200 for medium. + +Also, Emacs by default will jump around a lot when scrolling a buffer +with images. In order to prevent that, you can set +@var{scroll-up-aggressively} and @var{scroll-down-aggressively} to the +number ``0.0''. + +To show a 'no cover' image for albums which don't have a cover, add +the following code to your .emacs: + +@lisp +(setq emms-browser-default-covers + (list "/path/to/cover_small.jpg" nil nil) +@end lisp + +The medium and large images can be set as well. + +You can download an example @uref{http://repose.cx/cover_small.jpg, +`no cover' image}. + +@node Changing Looks +@section Changing Looks + +The Browser's look can be customised. You can change the way the tree +structure looks, the display format and display faces. + +@subheading Changing Tree Structure + +You can change the way the tree is displayed by modifying the function +@command{emms-browser-next-mapping-type}. + +The following code displays artist->track instead of +artist->album->track when you switch to the 'singles' filter: + +@lisp +(defadvice emms-browser-next-mapping-type + (after no-album (current-mapping)) + (when (eq ad-return-value 'info-album) + (setq ad-return-value 'info-title))) +@end lisp + +@lisp +(defun toggle-album-display () + (if (string= emms-browser-current-filter-name "singles") + (ad-activate 'emms-browser-next-mapping-type) + (ad-deactivate 'emms-browser-next-mapping-type))) + +(add-hook 'emms-browser-filter-changed-hook 'toggle-album-display) +@end lisp + +@subheading Changing Display Format + +Format strings govern the way items are displayed in the browser and +playlist. You can customize these if you wish. + +@var{emms-browser-default-format} controls the format to use when no +other format has been explicitly defined. By default, only track and +albums deviate from the default. + +To customise the format of a particular type, find the name of the +field you want to use (eg `info-artist', `info-title', etc), and +insert that into emms-browser-<type>-format or +emms-browser-playlist-<type>-format. For example, if you wanted to +remove track numbers from tracks in both the browser and playlist, you +could do: + +@lisp +(defvar emms-browser-info-title-format "%i%n") +(defvar emms-browser-playlist-info-title-format + emms-browser-info-title-format) +@end lisp + +The format specifiers available include: + +@itemize @w +@item +%i indent relative to the current level +@item +%n the value of the item - eg -info-artist might be ``pink floyd'' +@item +%y the album year +@item +%A the album name +@item +%a the artist name of the track +@item +%t the title of the track +@item +%T the track number +@item +%cS a small album cover +@item +%cM a medium album cover +@item +%cL a big album cover +@end itemize + +Note that if you use track-related items like %t, it will take the +data from the first track. + +@subheading Changing Display Faces + +The faces used to display the various fields are also customizable. +They are in the format emms-browser-<type>-face, where type is one of +"year/genre", "artist", "album" or "track". Note that faces lack the +initial "info-" part. For example, to change the artist face, type M-x +@command{customize-face} @command{emms-browser-artist-face}. + +@node Sorting Playlists +@chapter Sorting Playlists + +@cindex sort +@cindex track order + +The `emms-playlist-sort' module, defined in the +@file{emms-playlist-sort.el} package provides functions for sorting +Emms playlists. `emms-playlist-sort' can be loaded by invoking: + +@lisp +(require 'emms-playlist-sort) +@end lisp + +@defun emms-playlist-sort-by-name +Sort playlist by name in ascending order. +@end defun + +@defun emms-playlist-sort-by-info-artist +Sort playlist by artist in ascending order. +@end defun + +@defun emms-playlist-sort-by-info-title +Sort playlist by title in ascending order. +@end defun + +@defun emms-playlist-sort-by-info-album +Sort playlist by album in ascending order. +@end defun + +@defun emms-playlist-sort-by-info-year +Sort playlist by year in ascending order. +@end defun + +@defun emms-playlist-sort-by-info-note +Sort playlist by notes in ascending order. +@end defun + +@defun emms-playlist-sort-by-score +Sort emms playlist by score in descending order. +@end defun + +@node Persistent Playlists +@chapter Persistent Playlists + +The Emms module @file{emms-history.el} makes playlists persistent over +emacs sessions. To make use of this feature put this into your +~/.emacs. + +@lisp +(require 'emms-history) +@end lisp + +When you kill emacs all playlists will be saved in the file given by the +variable: + +@defopt emms-history-file +The file to save playlists in. It defaults to +"~/.emacs.d/emms-history". +@end defopt + +After you started up emacs again, you can restore all saved playlists +with this function. + +@defun emms-history-load +Restore all playlists in `emms-history-file'. +@end defun + +If that should be done automatically on each startup, put these lines +into your ~/.emacs. + +@lisp +(require 'emms-history) +(emms-history-load) +@end lisp + +Normally @code{emms-history} only restores playlists. If you want it to +start playback afterwards, you can tweak this variable. + +@defopt emms-history-start-playing +If non-nil emms starts playing the current track after +`emms-history-load' was invoked. The default value is nil. +@end defopt + +@node Editing Tracks +@chapter Editing Tracks + +@cindex track editor + +Using @file{emms-tag-editor.el}, emms can set tag informations of tracks +and write them back to the file with the help of external programs, such +as `mp3info', `vorbiscomment'. + +Use the keybinding @kbd{E} to edit the tags of track under point in the +playlist or all marked tracks (@pxref{Markable Playlists} for how to +mark tracks). The track's tag informations are listed in a special +buffer `*EMMS-TAGS*' in text format. Field names are marked in bold +face and are not editable. Any tag information is placed behind an +equal sign and is changable. A special field `name' is the track's file +name. If any change is made in this field, the track's file will be +renamed to the new name. When you finished editing the tag infos use +@kbd{C-c C-c} (which calls @code{emms-tag-editor-submit-and-exit}) to +submit the changes and close the `*EMMS-TAGS*' buffer. + +There are a few commands to perform changes on all tracks. + +@defun emms-tag-editor-set-all tag value +Set TAG to VALUE in all tracks. + +If transient-mark-mode is turned on, you can apply the command to a +selected region. + +If `transient-mark-mode' is on and the mark is active, the changes will +only take effect on the tracks in the region. +@end defun + +@defun emms-tag-editor-replace-in-tag tag from to +Query and replace text in selected TAG. + +For example, if the info-title tag is selected, then only perform +replacement in title tags. + +If `transient-mark-mode' is on and the mark is active, the changes will +only take effect on the tracks in the region. +@end defun + +@defun emms-tag-editor-transpose-tag tag1 tag2 +Transpose value of TAG1 and TAG2. + +If `transient-mark-mode' is on and the mark is active, the changes will +only take effect on the tracks in the region. +@end defun + +@defun emms-tag-editor-submit arg +Make modified tags take affect. + +With prefix argument, bury the tag edit buffer. +@end defun + +If you want to extend the tag editor to work with file formats other +than `mp3' and `ogg', have a look at these variables. + +@defvr {Variable} emms-tag-editor-formats +This variable determine how to insert track fields to +`emms-tag-editor-edit-buffer'. Emms tag info editable fields is usually +determined by the extension of track name. The variable +`emms-tag-editor-tags' contains all tags that emms track may have. A +single charactar is assigned to the tag to make the +`emms-tag-editor-formats' easier to generate. +@end defvr + +@defvr {Variable} emms-tag-editor-tagfile-functions +To write tags to track file, an extern program should specified in this +variable. + +If the external program has an interface like `mp3info', you don't have +to write a function. Take `mp3' and `ogg' as example. +@end defvr + +@heading Renaming Files + +The tag editor is also capable to rename the file of the track at point +or all files of the marked tracks according to the value this variable. + +@defopt emms-tag-editor-rename-format +When `emms-tag-editor-rename' is invoked the track's file will be +renamed according this format specification. The file extension will be +added automatically. + +It uses the format specs defined in @code{emms-tag-editor-tags}. + +The default value is "%a - %l - %n - %t", so that files are named + + <Artist> - <Album> - <Tracknumber> - <Title>.<extension> + +after renaming. +@end defopt + +To perform the renaming put point on the track you want to rename or +mark some tracks. Then hit @kbd{R} which calls this function: + +@defun emms-tag-editor-rename +Rename the file corresponding to track at point or all marked tracks +according to the value of @code{emms-tag-editor-rename-format}. +@end defun + +@node Emms Mode Line +@chapter Emms Mode Line + +@cindex mode line +@cindex display emms information + +We can display information about the currenty playing track on the +Emacs mode line using the package `emms-mode-line' which is provided +by the file @file{emms-mode-line.el}. + +To activate this feature invoke: + +@lisp +(require 'emms-mode-line) +(emms-mode-line 1) +@end lisp + +It is also possible to display the amount of time a track has been +playing. This feature is defined in the `emms-playing-time' package +which is provided by the file @file{emms-playing-time.el}. + +To use this feature invoke: + +@lisp +(require 'emms-playing-time) +(emms-playing-time 1) +@end lisp + +Note: `(emms-playing-time -1)' will disable emms-playing-time module +completely, and is not recommended. (since some other emms modules may +rely on it, such as `emms-lastfm.el') + +Instead, to toggle displaying playing time on mode line, one could call +`emms-playing-time-enable-display' and +`emms-playing-time-disable-display'." + +@defun emms-playing-time-enable-display +Display playing time on mode line. +@end defun + +@defun emms-playing-time-disable-display +Remove playing time from mode line. +@end defun + +@node Music Player Daemon +@chapter Music Player Daemon + +@cindex music player daemon +@cindex remote interface +@cindex mpd + +Emms provides an interface to the @uref{http://www.musicpd.org/, Music +Player Daemon}(MusicPD) software. The package is called `emms-player-mpd' and +is provided by the file @file{emms-player-mpd.el}. + +The advantages of using MusicPD as an EMMS backend include the +following. + +@itemize @bullet +@item minimal CPU usage +@item fast access of track information +@item optional crossfade +@end itemize + +@subheading Setup + +To load `emms-player-mpd' invoke: + +@lisp +(require 'emms-player-mpd) +@end lisp + +Set the variables @var{emms-player-mpd-server-name} and +@var{emms-player-mpd-server-port} to the location and port +(respectively) of your MusicPD server. For example: + +@lisp +(setq emms-player-mpd-server-name "localhost") +(setq emms-player-mpd-server-port "6600") +@end lisp + +If your MusicPD setup requires a password, you will to set +@var{emms-player-mpd-server-password} as follows. + +@lisp +(setq emms-player-mpd-server-password "mypassword") +@end lisp + +To get track information from MusicPD, invoke the following: + +@lisp +(add-to-list 'emms-info-functions 'emms-info-mpd) +@end lisp + +Adding `emms-player-mpd' to your Emms player list is accomplished by +invoking: + +@lisp +(add-to-list 'emms-player-list 'emms-player-mpd) +@end lisp + +If you use absolute file names in your m3u playlists (which is most +likely), make sure you set @var{emms-player-mpd-music-directory} to +the value of "music_directory" from your MusicPD config. There are +additional options available as well, but the defaults should be +sufficient for most uses. + +You can set @var{emms-player-mpd-sync-playlist} to nil if your master +EMMS playlist contains only stored playlists. + +@subheading Commands provided + +@defun emms-player-mpd-connect +Connect to MusicPD and retrieve its current playlist. Afterward, the +status of MusicPD will be tracked. +@end defun + +@defun emms-player-mpd-disconnect +Terminate the MusicPD client process and disconnect from MusicPD. +@end defun + +@defun emms-player-mpd-show &optional insertp +Describe the current EMMS track in the minibuffer. If INSERTP is +non-nil, insert the description into the current buffer instead. This +function uses @var{emms-show-format} to format the current track. It +differs from @command{emms-show} in that it asks MusicPD for the +current track, rather than Emms. +@end defun + +@subsubheading Updating the MusicPD database + +@defun emms-player-mpd-update-directory dir +Cause the tracks in DIR to be updated in the MusicPD database. +@end defun + +@defun emms-player-mpd-update-all +Cause all tracks in the MusicPD music directory to be updated in +the MusicPD database. +@end defun + +@subsubheading emms-cache.el integration + +@defun emms-cache-set-from-mpd-directory dir +Dump all MusicPD data from DIR into the EMMS cache. +This is useful to do when you have recently acquired new music. +@end defun + +@defun emms-cache-set-from-mpd-all +Dump all MusicPD data into the EMMS cache. +This is useful to do once, just before using emms-browser.el, in +order to prime the cache. +@end defun + +@subsubheading emms-volume.el integration + +To activate this, add the following to your .emacs. + +@lisp +(require 'emms-volume) +(setq emms-volume-change-function 'emms-volume-mpd-change) +@end lisp + +@node Lyrics +@chapter Lyrics + +@cindex lyrics + +We can display the lyrics of a song in time with the music using the +`emms-lyrics' package provided by the file @file{emms-lyrics.el}. + +The lyrics files should have the extention ``.lrc'', and can be placed +under either the same directory as the music files or +@var{emms-lyrics-dir}. + +To add this feature we invoke: + +@lisp +(require 'emms-lyrics) +(emms-lyrics 1) +@end lisp + +There are a number of variables we can set to define the way that +`emms-lyrics' behaves, we can set these directly or by using the +Customize feature in Emacs. + +@defvr {User Option} emms-lyrics-display-on-minibuffer +If non-nil, display lyrics on minibuffer. +@end defvr + +@defvr {User Option} emms-lyrics-display-on-modeline +If non-nil, display lyrics on modeline. +@end defvr + +@defvr {User Option} emms-lyrics-dir +Local lyrics repository. +@command{emms-lyrics-find-lyric} will look for lyrics in current +directory(i.e., same as the music file) and this directory. +@end defvr + +@defvr {User Option} emms-lyrics-display-format +Format for displaying lyrics. "%s" will be replaced by the lyrics +string. +@end defvr + +@defvr {User Option} emms-lyrics-coding-system +Coding system used in the output of lyrics. +@end defvr + +@defvr {User Option} emms-lyrics-scroll-p +Non-nil value will enable lyrics scrolling. +@end defvr + +@defvr {User Option} emms-lyrics-scroll-timer-interval +Interval between scroller timers. The shorter, the faster. +@end defvr + +We can control `emms-lyrics' with the help of the following functions: + +@defun emms-lyrics-start +Start displaying lyrics. +@end defun + +@defun emms-lyrics-stop +Stop displaying lyrics. +@end defun + +@defun emms-lyrics-toggle-display-on-minibuffer +Toggle display lyrics on minibufer. +@end defun + +@defun emms-lyrics-toggle-display-on-modeline +Toggle display lyrics on mode line. +@end defun + +@defun emms-lyrics-enable +Enable displaying Emms lyrics. +@end defun + +@defun emms-lyrics-disable +Disable displaying Emms lyrics. +@end defun + +@defun emms-lyrics-toggle +Toggle displaying Emms lyrics. +@end defun + +@node Volume +@chapter Volume + +@cindex volume + +We can use the `emms-volume' package, as provided by the +@file{emms-volume.el} file, to manipulate the volume. + +@defopt emms-volume-change-amount +The amount to use when raising or lowering the volume using the +emms-volume interface. + +This should be a positive integer. +@end defopt + +@defun emms-volume-raise +Increase the volume. +@end defun + +@defun emms-volume-lower +Decrease the volume. +@end defun + +If you feel like binding those two functions to global keys --- don't do +it or you'll miss the convenience of `emms-volume-minor-mode'. Instead, +bind the following two commands to some keys that you like. + +@defun emms-volume-mode-plus +Raise volume and enable or extend the `emms-volume-minor-mode' timeout. +@end defun + +@defun emms-volume-mode-minus +Lower volume and enable or extend the `emms-volume-minor-mode' timeout. +@end defun + +Example: + +@lisp +(global-set-key (kbd "C-c +") 'emms-volume-mode-plus) +(global-set-key (kbd "C-c -") 'emms-volume-mode-minus) +@end lisp + +Whenever you use one of these keys or call these functions with +@kbd{M-x}, Emms will be put into `emms-volume-minor-mode' for a short +period defined by `emms-volume-mode-timeout'. + +@defopt emms-volume-mode-timeout +The timeout in amount of seconds used by `emms-volume-minor-mode'. +@end defopt + +In this interval you can raise/lower the volume simply by pressing +@kbd{+} or @kbd{-}, which will also reset the timer to its initial +value. So instead of pressing @kbd{C-c +} six times to increase volume +by six steps of @code{emms-volume-change-amount}, you would simply type +@kbd{C-c + + + + + +}. + + +@node Last.fm +@chapter Last.fm + +@cindex last.fm + +Currently the `emms-lastfm' package provided by the file +@file{emms-lastfm.el} offers the two most important last.fm services. + +@enumerate +@item +It can submit informations of tracks (artist, title, album) you listen +to to last.fm to enhance your music profile. + +@item +You can listen to the Last.fm radio. Those are the streams beginning +with lastfm://. +@end enumerate + +For both services you need a last.fm account and you have to set up +two variables. + +@defopt emms-lastfm-username +Your last.fm username. +@end defopt + +@defopt emms-lastfm-password +Your last.fm password. +@end defopt + +To set them in your @file{.emacs} add something like this. + +@lisp +(setq emms-lastfm-username "my-user-name" + emms-lastfm-password "very-secret!") +@end lisp + +You can edit them with the `customize' interface, too. + +@menu +* Submitting track informations:: How to submit track information to last.fm. +* Last.fm radio:: How to listen to last.fm radio. +@end menu + +@node Submitting track informations +@section Submitting track informations + +These functions enable/disable submission of track informations to +last.fm. + +@defun emms-lastfm-enable +Start submitting to last.fm. Note that submission will start with the +next track, not the current one. +@end defun + +@defun emms-lastfm-disable +Stop submission of track informations. +@end defun + +If you want to enable submission of tracks by default, put this into +your @file{.emacs}. + +@lisp +(emms-lastfm-activate) +@end lisp + +@node Last.fm radio +@section Last.fm radio + +On http://www.last.fm you'll find lots of links referencing last.fm +radio stations like lastfm://artist/Metallica/fans. You can listen to +them using these functions. + +@defun emms-lastfm-radio lastfm-url +Starts playing the stream referenced by @var{lastfm-url}. When run +interactively you will be prompted for a last.fm URL. +@end defun + +You can also insert Last.fm streams into playlists (or use +emms-streams.el to listen to them) by activating the player as follows. + +@lisp +(add-to-list 'emms-player-list 'emms-player-lastfm-radio) +@end lisp + +To add a Last.fm stream into the current playlist, do the following: +@kbd{M-x emms-add-lastfm RET lastfm://rest-of-url RET}. To directly +start playing use @command{emms-play-lastfm}. + +To read more about the concept of the ``current'' playlist +@xref{Playlists}. To add a last.fm stream to the playlist buffer that's +currently browsed (which might not be the ``current'' playlist), use +@command{emms-insert-lastfm} instead. + +For your convenience there are some functions which let you choose a +common radio station without having to remember or type its last.fm URL. + +@defun emms-lastfm-radio-similar-artists artist +Starts playing the similar artist radio of @var{artist}. When run +interactively you will be prompted for an artist name. +@end defun + +@defun emms-lastfm-radio-global-tag tag +Starts playing the global tag radio of @var{tag}. When run interactively +you will be prompted for a tag name. +@end defun + +@defun emms-lastfm-radio-artist-fan artist +Starts playing the artist fan radio of @var{artist}. When run +interactively you will be prompted for an artist name. +@end defun + +While listening to a last.fm radio station `emms-lastfm' will try to +fetch some meta-informations (artist and title) of the currently playing +song. That's controlled by the following variable: + +@defopt emms-lastfm-radio-metadata-period +When listening to Last.fm Radio every how many seconds should +emms-lastfm poll for metadata? If set to nil, there won't be any +polling at all. + +The default is 15: That means that the mode line will display the +wrong (last) track's data for a maximum of 15 seconds. If your +network connection has a big latency this value may be too +high. (But then streaming a 128KHz mp3 won't be fun anyway.) +@end defopt + +Even if you set this variable to nil (no polling) you can fetch the +meta-informations with one of the following functions. + +@defun emms-lastfm-radio-request-metadata +Request the metadata of the current song and display it in the +mode-line if the `emms-mode-line' package is enabled. +@end defun + +@defun emms-lastfm-np +Show the currently-playing lastfm radio tune. + +If you prefixed the command with @kbd{C-u}, the current song information +is inserted at point. + +Otherwise, display a message with the current song information. +@end defun + +When you listen to last.fm radio you can rate or skip the current song. + +@defun emms-lastfm-radio-love +Inform Last.fm that you love the currently playing song. +@end defun + +@defun emms-lastfm-radio-skip +Inform Last.fm that you want to skip the currently playing song. +@end defun + +@defun emms-lastfm-radio-ban +Inform Last.fm that you want to ban the currently playing song. +@end defun + +Ok, that's all. + + +@node Streaming Audio +@chapter Streaming Audio + +@cindex streaming audio +@cindex internet radio + +Emms provides a friendly interface for managing and playing streaming +audio in addition to the Emms playlist interface. The interface is +defined in the @file{emms-streams.el} package and can be loaded by +invoking: + +@lisp +(require 'emms-streams) +@end lisp + +The Emms interface for streaming audio is enabled by default in the +`emms-all' and `emms-devel' setup levels. For more information about +Emms setup levels see @xref{Simple Setup}. + +Enter the emms-streams interface by invoking @kbd{M-x} +@command{emms-streams}. The emms-streams interface comes with a +built-in, eclectic list of streaming audio channels from throughout the +Web. Emms can of-course play other streams than the ones listed by +default, you are free to remove any or all of them and add your +own.@footnote{If you enjoy a particular streaming audio station on the +Web and think that it belongs in the default list, please send us a +link and we will gladly add it!} + +If you want to play Last.fm streams, invoke the following and use the +``lastfm'' type when adding a bookmark to a Last.fm stream. + +@lisp +(require 'emms-lastfm) +@end lisp + +The following is a list of the key-bindings for the emms-streams +interface: + +@table @kbd +@item RET +@kindex RET (emms-streams) +@vindex emms-stream-default-action +Perform the default action when you press RET in the Emms Stream +interface. Can be either ``add'' or ``play''. The default is ``add'', +which adds the station under point to the Emms playlist. When +@var{emms-stream-default-action} is ``play'' then Emms will play the +streaming audio channel under point. +@item q +@kindex q (emms-streams) +@findex emms-stream-quit +Quit the emms-streams interface. +@item a +@kindex a (emms-streams) +@findex emms-stream-add-bookmark +Add a bookmark to a streaming audio URL to the list. +@item d +@kindex d (emms-streams) +@findex emms-stream-delete-bookmark +Remove a bookmark to a streaming audio URL from the list. +@item e +@kindex e (emms-streams) +@findex emms-stream-edit-bookmark +Edit the details of the bookmark under point. +@item h +@kindex h (emms-streams) +@findex describe-mode +Describe the emms-streams mode. +@item n +@kindex n (emms-streams) +@findex emms-stream-next-line +Move to the next line in the emms-streams buffer (same as C-n). +@item p +@kindex p (emms-streams) +@findex emms-stream-previous-line +Move to the previous line in the emms-streams buffer (same as C-p). +@item s +@kindex s (emms-streams) +@findex emms-stream-save-bookmarks-file +Save the bookmarks in the emms-streams interface to disk. The +bookmarks will be to the location designated in the variable +@var{emms-stream-bookmarks-file}. +@item i +@kindex i (emms-streams) +@findex emms-stream-info-bookmark +Return information about the streaming audio at the URL of the +bookmark under point. Note that this will only work if the +`emms-stream-info' has already been loaded. +@end table + +@c including the relevant licenses +@include gpl.texi +@include fdl.texi + +@node Concept Index +@unnumbered Concept Index +@printindex cp + +@node Function Index +@unnumbered Function Index +@printindex fn + +@node Variable Index +@unnumbered Variable Index +@printindex vr + +@node Keybinding Index +@unnumbered Keybinding Index +@printindex ky + +@bye diff --git a/doc/fdl.texi b/doc/fdl.texi new file mode 100644 index 0000000..1276677 --- /dev/null +++ b/doc/fdl.texi @@ -0,0 +1,451 @@ +@node The GNU FDL, Concept Index, Copying, Top +@chapter GNU Free Documentation License + +@cindex FDL, GNU Free Documentation License +@center Version 1.2, November 2002 + +@display +Copyright @copyright{} 2000,2001,2002 Free Software Foundation, Inc. +51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA + +Everyone is permitted to copy and distribute verbatim copies +of this license document, but changing it is not allowed. +@end display + +@enumerate 0 +@item +PREAMBLE + +The purpose of this License is to make a manual, textbook, or other +functional and useful document @dfn{free} in the sense of freedom: to +assure everyone the effective freedom to copy and redistribute it, +with or without modifying it, either commercially or noncommercially. +Secondarily, this License preserves for the author and publisher a way +to get credit for their work, while not being considered responsible +for modifications made by others. + +This License is a kind of ``copyleft'', which means that derivative +works of the document must themselves be free in the same sense. It +complements the GNU General Public License, which is a copyleft +license designed for free software. + +We have designed this License in order to use it for manuals for free +software, because free software needs free documentation: a free +program should come with manuals providing the same freedoms that the +software does. But this License is not limited to software manuals; +it can be used for any textual work, regardless of subject matter or +whether it is published as a printed book. We recommend this License +principally for works whose purpose is instruction or reference. + +@item +APPLICABILITY AND DEFINITIONS + +This License applies to any manual or other work, in any medium, that +contains a notice placed by the copyright holder saying it can be +distributed under the terms of this License. Such a notice grants a +world-wide, royalty-free license, unlimited in duration, to use that +work under the conditions stated herein. The ``Document'', below, +refers to any such manual or work. Any member of the public is a +licensee, and is addressed as ``you''. You accept the license if you +copy, modify or distribute the work in a way requiring permission +under copyright law. + +A ``Modified Version'' of the Document means any work containing the +Document or a portion of it, either copied verbatim, or with +modifications and/or translated into another language. + +A ``Secondary Section'' is a named appendix or a front-matter section +of the Document that deals exclusively with the relationship of the +publishers or authors of the Document to the Document's overall +subject (or to related matters) and contains nothing that could fall +directly within that overall subject. (Thus, if the Document is in +part a textbook of mathematics, a Secondary Section may not explain +any mathematics.) The relationship could be a matter of historical +connection with the subject or with related matters, or of legal, +commercial, philosophical, ethical or political position regarding +them. + +The ``Invariant Sections'' are certain Secondary Sections whose titles +are designated, as being those of Invariant Sections, in the notice +that says that the Document is released under this License. If a +section does not fit the above definition of Secondary then it is not +allowed to be designated as Invariant. The Document may contain zero +Invariant Sections. If the Document does not identify any Invariant +Sections then there are none. + +The ``Cover Texts'' are certain short passages of text that are listed, +as Front-Cover Texts or Back-Cover Texts, in the notice that says that +the Document is released under this License. A Front-Cover Text may +be at most 5 words, and a Back-Cover Text may be at most 25 words. + +A ``Transparent'' copy of the Document means a machine-readable copy, +represented in a format whose specification is available to the +general public, that is suitable for revising the document +straightforwardly with generic text editors or (for images composed of +pixels) generic paint programs or (for drawings) some widely available +drawing editor, and that is suitable for input to text formatters or +for automatic translation to a variety of formats suitable for input +to text formatters. A copy made in an otherwise Transparent file +format whose markup, or absence of markup, has been arranged to thwart +or discourage subsequent modification by readers is not Transparent. +An image format is not Transparent if used for any substantial amount +of text. A copy that is not ``Transparent'' is called ``Opaque''. + +Examples of suitable formats for Transparent copies include plain +@sc{ascii} without markup, Texinfo input format, La@TeX{} input +format, @acronym{SGML} or @acronym{XML} using a publicly available +@acronym{DTD}, and standard-conforming simple @acronym{HTML}, +PostScript or @acronym{PDF} designed for human modification. Examples +of transparent image formats include @acronym{PNG}, @acronym{XCF} and +@acronym{JPG}. Opaque formats include proprietary formats that can be +read and edited only by proprietary word processors, @acronym{SGML} or +@acronym{XML} for which the @acronym{DTD} and/or processing tools are +not generally available, and the machine-generated @acronym{HTML}, +PostScript or @acronym{PDF} produced by some word processors for +output purposes only. + +The ``Title Page'' means, for a printed book, the title page itself, +plus such following pages as are needed to hold, legibly, the material +this License requires to appear in the title page. For works in +formats which do not have any title page as such, ``Title Page'' means +the text near the most prominent appearance of the work's title, +preceding the beginning of the body of the text. + +A section ``Entitled XYZ'' means a named subunit of the Document whose +title either is precisely XYZ or contains XYZ in parentheses following +text that translates XYZ in another language. (Here XYZ stands for a +specific section name mentioned below, such as ``Acknowledgements'', +``Dedications'', ``Endorsements'', or ``History''.) To ``Preserve the Title'' +of such a section when you modify the Document means that it remains a +section ``Entitled XYZ'' according to this definition. + +The Document may include Warranty Disclaimers next to the notice which +states that this License applies to the Document. These Warranty +Disclaimers are considered to be included by reference in this +License, but only as regards disclaiming warranties: any other +implication that these Warranty Disclaimers may have is void and has +no effect on the meaning of this License. + +@item +VERBATIM COPYING + +You may copy and distribute the Document in any medium, either +commercially or noncommercially, provided that this License, the +copyright notices, and the license notice saying this License applies +to the Document are reproduced in all copies, and that you add no other +conditions whatsoever to those of this License. You may not use +technical measures to obstruct or control the reading or further +copying of the copies you make or distribute. However, you may accept +compensation in exchange for copies. If you distribute a large enough +number of copies you must also follow the conditions in section 3. + +You may also lend copies, under the same conditions stated above, and +you may publicly display copies. + +@item +COPYING IN QUANTITY + +If you publish printed copies (or copies in media that commonly have +printed covers) of the Document, numbering more than 100, and the +Document's license notice requires Cover Texts, you must enclose the +copies in covers that carry, clearly and legibly, all these Cover +Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on +the back cover. Both covers must also clearly and legibly identify +you as the publisher of these copies. The front cover must present +the full title with all words of the title equally prominent and +visible. You may add other material on the covers in addition. +Copying with changes limited to the covers, as long as they preserve +the title of the Document and satisfy these conditions, can be treated +as verbatim copying in other respects. + +If the required texts for either cover are too voluminous to fit +legibly, you should put the first ones listed (as many as fit +reasonably) on the actual cover, and continue the rest onto adjacent +pages. + +If you publish or distribute Opaque copies of the Document numbering +more than 100, you must either include a machine-readable Transparent +copy along with each Opaque copy, or state in or with each Opaque copy +a computer-network location from which the general network-using +public has access to download using public-standard network protocols +a complete Transparent copy of the Document, free of added material. +If you use the latter option, you must take reasonably prudent steps, +when you begin distribution of Opaque copies in quantity, to ensure +that this Transparent copy will remain thus accessible at the stated +location until at least one year after the last time you distribute an +Opaque copy (directly or through your agents or retailers) of that +edition to the public. + +It is requested, but not required, that you contact the authors of the +Document well before redistributing any large number of copies, to give +them a chance to provide you with an updated version of the Document. + +@item +MODIFICATIONS + +You may copy and distribute a Modified Version of the Document under +the conditions of sections 2 and 3 above, provided that you release +the Modified Version under precisely this License, with the Modified +Version filling the role of the Document, thus licensing distribution +and modification of the Modified Version to whoever possesses a copy +of it. In addition, you must do these things in the Modified Version: + +@enumerate A +@item +Use in the Title Page (and on the covers, if any) a title distinct +from that of the Document, and from those of previous versions +(which should, if there were any, be listed in the History section +of the Document). You may use the same title as a previous version +if the original publisher of that version gives permission. + +@item +List on the Title Page, as authors, one or more persons or entities +responsible for authorship of the modifications in the Modified +Version, together with at least five of the principal authors of the +Document (all of its principal authors, if it has fewer than five), +unless they release you from this requirement. + +@item +State on the Title page the name of the publisher of the +Modified Version, as the publisher. + +@item +Preserve all the copyright notices of the Document. + +@item +Add an appropriate copyright notice for your modifications +adjacent to the other copyright notices. + +@item +Include, immediately after the copyright notices, a license notice +giving the public permission to use the Modified Version under the +terms of this License, in the form shown in the Addendum below. + +@item +Preserve in that license notice the full lists of Invariant Sections +and required Cover Texts given in the Document's license notice. + +@item +Include an unaltered copy of this License. + +@item +Preserve the section Entitled ``History'', Preserve its Title, and add +to it an item stating at least the title, year, new authors, and +publisher of the Modified Version as given on the Title Page. If +there is no section Entitled ``History'' in the Document, create one +stating the title, year, authors, and publisher of the Document as +given on its Title Page, then add an item describing the Modified +Version as stated in the previous sentence. + +@item +Preserve the network location, if any, given in the Document for +public access to a Transparent copy of the Document, and likewise +the network locations given in the Document for previous versions +it was based on. These may be placed in the ``History'' section. +You may omit a network location for a work that was published at +least four years before the Document itself, or if the original +publisher of the version it refers to gives permission. + +@item +For any section Entitled ``Acknowledgements'' or ``Dedications'', Preserve +the Title of the section, and preserve in the section all the +substance and tone of each of the contributor acknowledgements and/or +dedications given therein. + +@item +Preserve all the Invariant Sections of the Document, +unaltered in their text and in their titles. Section numbers +or the equivalent are not considered part of the section titles. + +@item +Delete any section Entitled ``Endorsements''. Such a section +may not be included in the Modified Version. + +@item +Do not retitle any existing section to be Entitled ``Endorsements'' or +to conflict in title with any Invariant Section. + +@item +Preserve any Warranty Disclaimers. +@end enumerate + +If the Modified Version includes new front-matter sections or +appendices that qualify as Secondary Sections and contain no material +copied from the Document, you may at your option designate some or all +of these sections as invariant. To do this, add their titles to the +list of Invariant Sections in the Modified Version's license notice. +These titles must be distinct from any other section titles. + +You may add a section Entitled ``Endorsements'', provided it contains +nothing but endorsements of your Modified Version by various +parties---for example, statements of peer review or that the text has +been approved by an organization as the authoritative definition of a +standard. + +You may add a passage of up to five words as a Front-Cover Text, and a +passage of up to 25 words as a Back-Cover Text, to the end of the list +of Cover Texts in the Modified Version. Only one passage of +Front-Cover Text and one of Back-Cover Text may be added by (or +through arrangements made by) any one entity. If the Document already +includes a cover text for the same cover, previously added by you or +by arrangement made by the same entity you are acting on behalf of, +you may not add another; but you may replace the old one, on explicit +permission from the previous publisher that added the old one. + +The author(s) and publisher(s) of the Document do not by this License +give permission to use their names for publicity for or to assert or +imply endorsement of any Modified Version. + +@item +COMBINING DOCUMENTS + +You may combine the Document with other documents released under this +License, under the terms defined in section 4 above for modified +versions, provided that you include in the combination all of the +Invariant Sections of all of the original documents, unmodified, and +list them all as Invariant Sections of your combined work in its +license notice, and that you preserve all their Warranty Disclaimers. + +The combined work need only contain one copy of this License, and +multiple identical Invariant Sections may be replaced with a single +copy. If there are multiple Invariant Sections with the same name but +different contents, make the title of each such section unique by +adding at the end of it, in parentheses, the name of the original +author or publisher of that section if known, or else a unique number. +Make the same adjustment to the section titles in the list of +Invariant Sections in the license notice of the combined work. + +In the combination, you must combine any sections Entitled ``History'' +in the various original documents, forming one section Entitled +``History''; likewise combine any sections Entitled ``Acknowledgements'', +and any sections Entitled ``Dedications''. You must delete all +sections Entitled ``Endorsements.'' + +@item +COLLECTIONS OF DOCUMENTS + +You may make a collection consisting of the Document and other documents +released under this License, and replace the individual copies of this +License in the various documents with a single copy that is included in +the collection, provided that you follow the rules of this License for +verbatim copying of each of the documents in all other respects. + +You may extract a single document from such a collection, and distribute +it individually under this License, provided you insert a copy of this +License into the extracted document, and follow this License in all +other respects regarding verbatim copying of that document. + +@item +AGGREGATION WITH INDEPENDENT WORKS + +A compilation of the Document or its derivatives with other separate +and independent documents or works, in or on a volume of a storage or +distribution medium, is called an ``aggregate'' if the copyright +resulting from the compilation is not used to limit the legal rights +of the compilation's users beyond what the individual works permit. +When the Document is included in an aggregate, this License does not +apply to the other works in the aggregate which are not themselves +derivative works of the Document. + +If the Cover Text requirement of section 3 is applicable to these +copies of the Document, then if the Document is less than one half of +the entire aggregate, the Document's Cover Texts may be placed on +covers that bracket the Document within the aggregate, or the +electronic equivalent of covers if the Document is in electronic form. +Otherwise they must appear on printed covers that bracket the whole +aggregate. + +@item +TRANSLATION + +Translation is considered a kind of modification, so you may +distribute translations of the Document under the terms of section 4. +Replacing Invariant Sections with translations requires special +permission from their copyright holders, but you may include +translations of some or all Invariant Sections in addition to the +original versions of these Invariant Sections. You may include a +translation of this License, and all the license notices in the +Document, and any Warranty Disclaimers, provided that you also include +the original English version of this License and the original versions +of those notices and disclaimers. In case of a disagreement between +the translation and the original version of this License or a notice +or disclaimer, the original version will prevail. + +If a section in the Document is Entitled ``Acknowledgements'', +``Dedications'', or ``History'', the requirement (section 4) to Preserve +its Title (section 1) will typically require changing the actual +title. + +@item +TERMINATION + +You may not copy, modify, sublicense, or distribute the Document except +as expressly provided for under this License. Any other attempt to +copy, modify, sublicense or distribute the Document is void, and will +automatically terminate your rights under this License. However, +parties who have received copies, or rights, from you under this +License will not have their licenses terminated so long as such +parties remain in full compliance. + +@item +FUTURE REVISIONS OF THIS LICENSE + +The Free Software Foundation may publish new, revised versions +of the GNU Free Documentation License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. See +@uref{http://www.gnu.org/copyleft/}. + +Each version of the License is given a distinguishing version number. +If the Document specifies that a particular numbered version of this +License ``or any later version'' applies to it, you have the option of +following the terms and conditions either of that specified version or +of any later version that has been published (not as a draft) by the +Free Software Foundation. If the Document does not specify a version +number of this License, you may choose any version ever published (not +as a draft) by the Free Software Foundation. +@end enumerate + +@page +@section ADDENDUM: How to use this License for your documents + +To use this License in a document you have written, include a copy of +the License in the document and put the following copyright and +license notices just after the title page: + +@smallexample +@group + Copyright (C) @var{year} @var{your name}. + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.2 + or any later version published by the Free Software Foundation; + with no Invariant Sections, no Front-Cover Texts, and no Back-Cover + Texts. A copy of the license is included in the section entitled ``GNU + Free Documentation License''. +@end group +@end smallexample + +If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, +replace the ``with...Texts.'' line with this: + +@smallexample +@group + with the Invariant Sections being @var{list their titles}, with + the Front-Cover Texts being @var{list}, and with the Back-Cover Texts + being @var{list}. +@end group +@end smallexample + +If you have Invariant Sections without Cover Texts, or some other +combination of the three, merge those two alternatives to suit the +situation. + +If your document contains nontrivial examples of program code, we +recommend releasing these examples in parallel under your choice of +free software license, such as the GNU General Public License, +to permit their use in free software. + +@c Local Variables: +@c ispell-local-pdict: "ispell-dict" +@c End: + diff --git a/doc/gpl.texi b/doc/gpl.texi new file mode 100644 index 0000000..9223243 --- /dev/null +++ b/doc/gpl.texi @@ -0,0 +1,725 @@ +@node Copying, The GNU FDL, Extending Emms, Top + +@unnumbered GNU General Public License +@center Version 3, 29 June 2007 + +@c This file is intended to be included in another file. + +@display +Copyright @copyright{} 2007 Free Software Foundation, Inc. @url{http://fsf.org/} + +Everyone is permitted to copy and distribute verbatim copies of this +license document, but changing it is not allowed. +@end display + +@unnumberedsec Preamble + +The GNU General Public License is a free, copyleft license for +software and other kinds of works. + +The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom +to share and change all versions of a program--to make sure it remains +free software for all its users. We, the Free Software Foundation, +use the GNU General Public License for most of our software; it +applies also to any other work released this way by its authors. You +can apply it to your programs, too. + +When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + +To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you +have certain responsibilities if you distribute copies of the +software, or if you modify it: responsibilities to respect the freedom +of others. + +For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, +receive or can get the source code. And you must show them these +terms so they know their rights. + +Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + +For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + +Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the +manufacturer can do so. This is fundamentally incompatible with the +aim of protecting users' freedom to change the software. The +systematic pattern of such abuse occurs in the area of products for +individuals to use, which is precisely where it is most unacceptable. +Therefore, we have designed this version of the GPL to prohibit the +practice for those products. If such problems arise substantially in +other domains, we stand ready to extend this provision to those +domains in future versions of the GPL, as needed to protect the +freedom of users. + +Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish +to avoid the special danger that patents applied to a free program +could make it effectively proprietary. To prevent this, the GPL +assures that patents cannot be used to render the program non-free. + +The precise terms and conditions for copying, distribution and +modification follow. + +@iftex +@unnumberedsec TERMS AND CONDITIONS +@end iftex +@ifinfo +@center TERMS AND CONDITIONS +@end ifinfo + +@enumerate 0 +@item Definitions. + +``This License'' refers to version 3 of the GNU General Public License. + +``Copyright'' also means copyright-like laws that apply to other kinds +of works, such as semiconductor masks. + +``The Program'' refers to any copyrightable work licensed under this +License. Each licensee is addressed as ``you''. ``Licensees'' and +``recipients'' may be individuals or organizations. + +To ``modify'' a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of +an exact copy. The resulting work is called a ``modified version'' of +the earlier work or a work ``based on'' the earlier work. + +A ``covered work'' means either the unmodified Program or a work based +on the Program. + +To ``propagate'' a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + +To ``convey'' a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user +through a computer network, with no transfer of a copy, is not +conveying. + +An interactive user interface displays ``Appropriate Legal Notices'' to +the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + +@item Source Code. + +The ``source code'' for a work means the preferred form of the work for +making modifications to it. ``Object code'' means any non-source form +of a work. + +A ``Standard Interface'' means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + +The ``System Libraries'' of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +``Major Component'', in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + +The ``Corresponding Source'' for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + +The Corresponding Source need not include anything that users can +regenerate automatically from other parts of the Corresponding Source. + +The Corresponding Source for a work in source code form is that same +work. + +@item Basic Permissions. + +All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + +You may make, run and propagate covered works that you do not convey, +without conditions so long as your license otherwise remains in force. +You may convey covered works to others for the sole purpose of having +them make modifications exclusively for you, or provide you with +facilities for running those works, provided that you comply with the +terms of this License in conveying all material for which you do not +control copyright. Those thus making or running the covered works for +you must do so exclusively on your behalf, under your direction and +control, on terms that prohibit them from making any copies of your +copyrighted material outside their relationship with you. + +Conveying under any other circumstances is permitted solely under the +conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + +@item Protecting Users' Legal Rights From Anti-Circumvention Law. + +No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + +When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such +circumvention is effected by exercising rights under this License with +respect to the covered work, and you disclaim any intention to limit +operation or modification of the work as a means of enforcing, against +the work's users, your or third parties' legal rights to forbid +circumvention of technological measures. + +@item Conveying Verbatim Copies. + +You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + +You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + +@item Conveying Modified Source Versions. + +You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these +conditions: + +@enumerate a +@item +The work must carry prominent notices stating that you modified it, +and giving a relevant date. + +@item +The work must carry prominent notices stating that it is released +under this License and any conditions added under section 7. This +requirement modifies the requirement in section 4 to ``keep intact all +notices''. + +@item +You must license the entire work, as a whole, under this License to +anyone who comes into possession of a copy. This License will +therefore apply, along with any applicable section 7 additional terms, +to the whole of the work, and all its parts, regardless of how they +are packaged. This License gives no permission to license the work in +any other way, but it does not invalidate such permission if you have +separately received it. + +@item +If the work has interactive user interfaces, each must display +Appropriate Legal Notices; however, if the Program has interactive +interfaces that do not display Appropriate Legal Notices, your work +need not make them do so. +@end enumerate + +A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +``aggregate'' if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + +@item Conveying Non-Source Forms. + +You may convey a covered work in object code form under the terms of +sections 4 and 5, provided that you also convey the machine-readable +Corresponding Source under the terms of this License, in one of these +ways: + +@enumerate a +@item +Convey the object code in, or embodied in, a physical product +(including a physical distribution medium), accompanied by the +Corresponding Source fixed on a durable physical medium customarily +used for software interchange. + +@item +Convey the object code in, or embodied in, a physical product +(including a physical distribution medium), accompanied by a written +offer, valid for at least three years and valid for as long as you +offer spare parts or customer support for that product model, to give +anyone who possesses the object code either (1) a copy of the +Corresponding Source for all the software in the product that is +covered by this License, on a durable physical medium customarily used +for software interchange, for a price no more than your reasonable +cost of physically performing this conveying of source, or (2) access +to copy the Corresponding Source from a network server at no charge. + +@item +Convey individual copies of the object code with a copy of the written +offer to provide the Corresponding Source. This alternative is +allowed only occasionally and noncommercially, and only if you +received the object code with such an offer, in accord with subsection +6b. + +@item +Convey the object code by offering access from a designated place +(gratis or for a charge), and offer equivalent access to the +Corresponding Source in the same way through the same place at no +further charge. You need not require recipients to copy the +Corresponding Source along with the object code. If the place to copy +the object code is a network server, the Corresponding Source may be +on a different server (operated by you or a third party) that supports +equivalent copying facilities, provided you maintain clear directions +next to the object code saying where to find the Corresponding Source. +Regardless of what server hosts the Corresponding Source, you remain +obligated to ensure that it is available for as long as needed to +satisfy these requirements. + +@item +Convey the object code using peer-to-peer transmission, provided you +inform other peers where the object code and Corresponding Source of +the work are being offered to the general public at no charge under +subsection 6d. + +@end enumerate + +A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + +A ``User Product'' is either (1) a ``consumer product'', which means any +tangible personal property which is normally used for personal, +family, or household purposes, or (2) anything designed or sold for +incorporation into a dwelling. In determining whether a product is a +consumer product, doubtful cases shall be resolved in favor of +coverage. For a particular product received by a particular user, +``normally used'' refers to a typical or common use of that class of +product, regardless of the status of the particular user or of the way +in which the particular user actually uses, or expects or is expected +to use, the product. A product is a consumer product regardless of +whether the product has substantial commercial, industrial or +non-consumer uses, unless such uses represent the only significant +mode of use of the product. + +``Installation Information'' for a User Product means any methods, +procedures, authorization keys, or other information required to +install and execute modified versions of a covered work in that User +Product from a modified version of its Corresponding Source. The +information must suffice to ensure that the continued functioning of +the modified object code is in no case prevented or interfered with +solely because modification has been made. + +If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + +The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or +updates for a work that has been modified or installed by the +recipient, or for the User Product in which it has been modified or +installed. Access to a network may be denied when the modification +itself materially and adversely affects the operation of the network +or violates the rules and protocols for communication across the +network. + +Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + +@item Additional Terms. + +``Additional permissions'' are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + +When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + +Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders +of that material) supplement the terms of this License with terms: + +@enumerate a +@item +Disclaiming warranty or limiting liability differently from the terms +of sections 15 and 16 of this License; or + +@item +Requiring preservation of specified reasonable legal notices or author +attributions in that material or in the Appropriate Legal Notices +displayed by works containing it; or + +@item +Prohibiting misrepresentation of the origin of that material, or +requiring that modified versions of such material be marked in +reasonable ways as different from the original version; or + +@item +Limiting the use for publicity purposes of names of licensors or +authors of the material; or + +@item +Declining to grant rights under trademark law for use of some trade +names, trademarks, or service marks; or + +@item +Requiring indemnification of licensors and authors of that material by +anyone who conveys the material (or modified versions of it) with +contractual assumptions of liability to the recipient, for any +liability that these contractual assumptions directly impose on those +licensors and authors. +@end enumerate + +All other non-permissive additional terms are considered ``further +restrictions'' within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + +If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + +Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; the +above requirements apply either way. + +@item Termination. + +You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + +However, if you cease all violation of this License, then your license +from a particular copyright holder is reinstated (a) provisionally, +unless and until the copyright holder explicitly and finally +terminates your license, and (b) permanently, if the copyright holder +fails to notify you of the violation by some reasonable means prior to +60 days after the cessation. + +Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + +Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + +@item Acceptance Not Required for Having Copies. + +You are not required to accept this License in order to receive or run +a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + +@item Automatic Licensing of Downstream Recipients. + +Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + +An ``entity transaction'' is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + +You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + +@item Patents. + +A ``contributor'' is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's ``contributor version''. + +A contributor's ``essential patent claims'' are all patent claims owned +or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, ``control'' includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + +Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + +In the following three paragraphs, a ``patent license'' is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To ``grant'' such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + +If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. ``Knowingly relying'' means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + +If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + +A patent license is ``discriminatory'' if it does not include within the +scope of its coverage, prohibits the exercise of, or is conditioned on +the non-exercise of one or more of the rights that are specifically +granted under this License. You may not convey a covered work if you +are a party to an arrangement with a third party that is in the +business of distributing software, under which you make payment to the +third party based on the extent of your activity of conveying the +work, and under which the third party grants, to any of the parties +who would receive the covered work from you, a discriminatory patent +license (a) in connection with copies of the covered work conveyed by +you (or copies made from those copies), or (b) primarily for and in +connection with specific products or compilations that contain the +covered work, unless you entered into that arrangement, or that patent +license was granted, prior to 28 March 2007. + +Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + +@item No Surrender of Others' Freedom. + +If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey +a covered work so as to satisfy simultaneously your obligations under +this License and any other pertinent obligations, then as a +consequence you may not convey it at all. For example, if you agree +to terms that obligate you to collect a royalty for further conveying +from those to whom you convey the Program, the only way you could +satisfy both those terms and this License would be to refrain entirely +from conveying the Program. + +@item Use with the GNU Affero General Public License. + +Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + +@item Revised Versions of this License. + +The Free Software Foundation may publish revised and/or new versions +of the GNU General Public License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies that a certain numbered version of the GNU General Public +License ``or any later version'' applies to it, you have the option of +following the terms and conditions either of that numbered version or +of any later version published by the Free Software Foundation. If +the Program does not specify a version number of the GNU General +Public License, you may choose any version ever published by the Free +Software Foundation. + +If the Program specifies that a proxy can decide which future versions +of the GNU General Public License can be used, that proxy's public +statement of acceptance of a version permanently authorizes you to +choose that version for the Program. + +Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + +@item Disclaimer of Warranty. + +THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM ``AS IS'' WITHOUT +WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND +PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE +DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR +CORRECTION. + +@item Limitation of Liability. + +IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR +CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES +ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT +NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR +LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM +TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER +PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. + +@item Interpretation of Sections 15 and 16. + +If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + +@iftex +@heading END OF TERMS AND CONDITIONS +@end iftex +@ifinfo +@center END OF TERMS AND CONDITIONS +@end ifinfo +@unnumberedsec How to Apply These Terms to Your New Programs + +If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these +terms. + +To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the ``copyright'' line and a pointer to where the full notice is found. +@smallexample +@var{one line to give the program's name and a brief idea of what it does.} +Copyright (C) @var{year} @var{name of author} + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or (at +your option) any later version. + +This program is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see @url{http://www.gnu.org/licenses/}. +@end smallexample + +Also add information on how to contact you by electronic and paper mail. + +If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + +@smallexample +@var{program} Copyright (C) @var{year} @var{name of author} +This program comes with ABSOLUTELY NO WARRANTY; for details type @samp{show w}. +This is free software, and you are welcome to redistribute it under certain conditions; type @samp{show c} for details. +@end smallexample + +The hypothetical commands @samp{show w} and @samp{show c} should show +the appropriate parts of the General Public License. Of course, your +program's commands might be different; for a GUI interface, you would +use an ``about box''. + +You should also get your employer (if you work as a programmer) or school, +if any, to sign a ``copyright disclaimer'' for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +@url{http://www.gnu.org/licenses/}. + +The GNU General Public License does not permit incorporating your +program into proprietary programs. If your program is a subroutine +library, you may consider it more useful to permit linking proprietary +applications with the library. If this is what you want to do, use +the GNU Lesser General Public License instead of this License. But +first, please read @url{http://www.gnu.org/philosophy/why-not-lgpl.html}. + +@end enumerate |