modified help pages

6 files changed, 251 insertions, 250 deletions

diff --git a/h-source/Application/Views/Help/index.php b/h-source/Application/Views/Help/index.php
index b4f29c1..b7f226d 100644
--- a/h-source/Application/Views/Help/index.php
+++ b/h-source/Application/Views/Help/index.php
@@ -257,31 +257,20 @@
 		<dt name="model-name">How to discover the model name of your device (if it is not a notebook)</dt>
 			<dd class="opt"><strong>If the device is integrated (example: a video card)</strong></dd>
 			<dd>Open a terminal and type the following command:</dd>
-			<dd><pre class="terminal">lspci -vmm</pre>
+			<dd><pre class="terminal">lspci</pre>
 			</dd>
 			<dd>or</dd>
-			<dd><pre class="terminal">lspci -vmm &gt; FILENAME          # output to a file</pre>
+			<dd><pre class="terminal">lspci &gt; FILENAME          # output to a file</pre>
 			</dd>
 		<!-- dd>where "filename" is the name of the file</dd -->
 			<dd>You will obtain the list of your PCI devices, similar to the one written below</dd>
-			<dd><pre class="terminal">Slot:03:00.0
-	Class:Network controller
-	Vendor:Broadcom Corporation
-	Device:<b>BCM4311 802.11b/g WLAN</b>
-	SVendor:Hewlett-Packard Company
-	SDevice:Device 1375
-	Rev:02
-	
-	Slot:07:05.0
-	Class:FireWire (IEEE 1394)
-	Vendor:Ricoh Co Ltd
-	Device:<b>R5C832 IEEE 1394 Controller</b>
-	SVendor:Hewlett-Packard Company
-	SDevice:Device 30cf
-	Rev:05
-	ProgIf:10</pre>
+			<dd><pre class="terminal">
+00:18.3 Host bridge: <b>Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control</b>
+03:00.0 Network controller: <b>Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)</b>
+05:00.0 VGA compatible controller: <b>nVidia Corporation G86 [GeForce 8400M GS] (rev a1)</b>
+			</pre>
 			</dd>
-			<dd class="note"><b>Note:</b> The name of each device is written at the "Device" row, after the colon (see the text
+			<dd class="note"><b>Note:</b> The name of each device is written after the colon (see the text
 				in bold in the above list)</dd>
 			<dd>If the device is an USB device (example: an external USB wifi card)</dd>
 			<dd>Open a terminal and type the following command:</dd>
@@ -292,42 +281,44 @@
 			</dd>
 			<!-- dd>where "filename" is the name of the file</dd -->
 			<dd>You will obtain the list of your USB devices, similar to the one written below</dd>
-			<dd><pre class="terminal">Bus 001 Device 002: ID 0846:4260 NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
-		Device Descriptor:
-		bLength						18
-		bDescriptorType				1
-		bcdUSB						2.00
-		bDeviceClass				0 (Defined at Interface level)
-		bDeviceSubClass				0
-		bDeviceProtocol				0
-		bMaxPacketSize0				64
-		idVendor					0x0846 NetGear, Inc.
-		idProduct					0x4260 <b>WG111v3 54 Mbps Wireless [realtek RTL8187B]</b>
-		bcdDevice					2.00
-		iManufacturer				1
-		iProduct					2
-		iSerial						3
-		...
-		...
-	
-	Bus 002 Device 003: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
-	Device Descriptor:
-		bLength						18
-		bDescriptorType				1
-		bcdUSB						1.10
-		bDeviceClass				255 Vendor Specific Class
-		bDeviceSubClass			 	255 Vendor Specific Subclass
-		bDeviceProtocol			 	255 Vendor Specific Protocol
-		bMaxPacketSize0				8
-		idVendor					0x08ff AuthenTec, Inc.
-		idProduct					0x2580 <b>AES2501 Fingerprint Sensor</b>
-		bcdDevice					6.23
-		iManufacturer				0
-		iProduct					1 Fingerprint Sensor
-		iSerial						0
-		bNumConfigurations			1
-		...
-		...</pre>
+			<dd><pre class="terminal">
+Bus 001 Device 002: ID 0846:4260 NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
+Device Descriptor:
+	bLength						18
+	bDescriptorType				1
+	bcdUSB						2.00
+	bDeviceClass				0 (Defined at Interface level)
+	bDeviceSubClass				0
+	bDeviceProtocol				0
+	bMaxPacketSize0				64
+	idVendor					0x0846 NetGear, Inc.
+	idProduct					0x4260 <b>WG111v3 54 Mbps Wireless [realtek RTL8187B]</b>
+	bcdDevice					2.00
+	iManufacturer				1
+	iProduct					2
+	iSerial						3
+	...
+	...
+
+Bus 002 Device 003: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
+Device Descriptor:
+	bLength						18
+	bDescriptorType				1
+	bcdUSB						1.10
+	bDeviceClass				255 Vendor Specific Class
+	bDeviceSubClass			 	255 Vendor Specific Subclass
+	bDeviceProtocol			 	255 Vendor Specific Protocol
+	bMaxPacketSize0				8
+	idVendor					0x08ff AuthenTec, Inc.
+	idProduct					0x2580 <b>AES2501 Fingerprint Sensor</b>
+	bcdDevice					6.23
+	iManufacturer				0
+	iProduct					1 Fingerprint Sensor
+	iSerial						0
+	bNumConfigurations			1
+	...
+	...
+			</pre>
 			</dd>
 			<dd class="note"><b>Note:</b> The name of each device is written at the row starting with "idProduct" (see the text
 				in bold in the above list)</dd>
@@ -361,11 +352,12 @@
 				<dd>Open a terminal and type the following command:</dd>
 			<dd><pre class="terminal">sudo lspci -nnk</pre></dd>
 				<dd>You should obtain a list of hardware similar to the one written below</dd>
-				<dd><pre class="terminal">03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [<b>14e4:4311</b>] (rev 02)
-					Kernel driver in use: b43-pci-bridge
-					Kernel modules: ssb
-	05:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8400M GS] [<b>10de:0427</b>] (rev a1)
-					Kernel modules: nouveau, nvidiafb</pre>
+				<dd><pre class="terminal">
+03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [<b>14e4:4311</b>] (rev 02)
+	Kernel driver in use: b43-pci-bridge
+	Kernel modules: ssb
+05:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8400M GS] [<b>10de:0427</b>] (rev a1)
+	Kernel modules: nouveau, nvidiafb</pre>
 				</dd>
 				<dd>The strings in <b>bold</b> and placed inside the square brackets (in the above list) are the code you are
 					looking for. The first set of digits (before the colon) are the <b>VendorID</b>, the second set of digits are
@@ -377,9 +369,10 @@
 				<dd><pre class="terminal">sudo lsusb</pre>
 				</dd>
 				<dd>You should obtain a list of hardware similar to the one written below</dd>
-				<dd><pre class="terminal">Bus 001 Device 002: ID <b>0846:4260</b> NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
-	Bus 001 Device 001: ID <b>1d6b:0002</b> Linux Foundation 2.0 root hub
-	Bus 002 Device 003: ID <b>08ff:2580</b> AuthenTec, Inc. AES2501 Fingerprint Sensor</pre>
+				<dd><pre class="terminal">
+Bus 001 Device 002: ID <b>0846:4260</b> NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
+Bus 001 Device 001: ID <b>1d6b:0002</b> Linux Foundation 2.0 root hub
+Bus 002 Device 003: ID <b>08ff:2580</b> AuthenTec, Inc. AES2501 Fingerprint Sensor</pre>
 				</dd>
 				<dd>The strings in <b>bold</b> (in the above list) are the code you are looking for. The first set of digits
 					(before the colon) are the <b>VendorID</b>, the second set of digits are the <b>ProductID</b>. In the above
diff --git a/h-source/Application/Views/Help/index_de.php b/h-source/Application/Views/Help/index_de.php
index 019bff4..5e935b5 100644
--- a/h-source/Application/Views/Help/index_de.php
+++ b/h-source/Application/Views/Help/index_de.php
@@ -260,32 +260,20 @@
 		<dt name="model-name">Wie man den Modellnamen der Geräte herausfindet (wenn kein tragbarer Klapprechner)</dt>
 			<dd class="opt">Wenn das Gerät eingebaut ist (z. B. eine Grafikkarte)</dd>
 			<dd>Öffnen Sie ein Terminal („Eingabeaufforderung“) und geben Sie folgenden Befehl ein:</dd>
-			<dd><pre class="terminal">lspci -vmm</pre>
+			<dd><pre class="terminal">lspci</pre>
 			</dd>
 			<dd>oder</dd>
-			<dd><pre class="terminal">lspci -vmm &gt; DATEINAME          # Ausgabe als Datei speichern</pre>
+			<dd><pre class="terminal">lspci &gt; DATEINAME          # Ausgabe als Datei speichern</pre>
 			</dd>
 		<!--<dd>where "filename" is the name of the file</dd>-->
 			<dd>Es sollten PCI-Geräte ähnlich der folgenden angezeigt werden:</dd>
-			<dd><pre class="terminal">Slot:		03:00.0
-	Class:	 Network controller
-	Vendor:	Broadcom Corporation
-	Device:	<b>BCM4311 802.11b/g WLAN</b>
-	SVendor: Hewlett-Packard Company
-	SDevice: Device 1375
-	Rev:		 02
-	
-	Slot:		07:05.0
-	Class:	 FireWire (IEEE 1394)
-	Vendor:	Ricoh Co Ltd
-	Device:	<b>R5C832 IEEE 1394 Controller
-	</b>SVendor: Hewlett-Packard Company
-	SDevice: Device 30cf
-	Rev:		 05
-	ProgIf:	10</pre>
+			<dd><pre class="terminal">
+00:18.3 Host bridge: <b>Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control</b>
+03:00.0 Network controller: <b>Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)</b>
+05:00.0 VGA compatible controller: <b>nVidia Corporation G86 [GeForce 8400M GS] (rev a1)</b></pre>
 			</dd>
-			<dd class="note"><b>Hinweis:</b> Die Gerätebezeichnung wird in der Zeile „Device“ nach dem Doppelpunkt
-				angegeben (siehe Text in Fettdruck).</dd>
+			<dd class="note"><b>Hinweis:</b> The name of each device is written after the colon (see the text
+				in bold in the above list).</dd>
 			<dd class="opt">Wenn das Gerät ein USB-Gerät ist (bspw. ein externer WLAN-Stick)</dd>
 			<dd>Öffnen Sie ein Terminal („Eingabeaufforderung“) und geben Sie folgenden Befehl ein:</dd>
 			<dd><pre class="terminal">lsusb -v</pre>
@@ -295,42 +283,44 @@
 			</dd>
 			<!-- dd>where "filename" is the name of the file.</dd -->
 			<dd>Es sollten USB-Geräte ähnlich der folgenden angezeigt werden:</dd>
-			<dd><pre class="terminal">Bus 001 Device 002: ID 0846:4260 NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
-	Device Descriptor:
-		bLength						18
-		bDescriptorType				1
-		bcdUSB						2.00
-		bDeviceClass				0 (Defined at Interface level)
-		bDeviceSubClass				0
-		bDeviceProtocol				0
-		bMaxPacketSize0				64
-		idVendor					0x0846 NetGear, Inc.
-		idProduct					0x4260 <b>WG111v3 54 Mbps Wireless [realtek RTL8187B]</b>
-		bcdDevice					2.00
-		iManufacturer				1
-		iProduct					2
-		iSerial						3
-		...
-		...
-	
-	Bus 002 Device 003: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
-	Device Descriptor:
-		bLength						18
-		bDescriptorType				1
-		bcdUSB						1.10
-		bDeviceClass				255 Vendor Specific Class
-		bDeviceSubClass				255 Vendor Specific Subclass
-		bDeviceProtocol				255 Vendor Specific Protocol
-		bMaxPacketSize0				8
-		idVendor					0x08ff AuthenTec, Inc.
-		idProduct					0x2580 <b>AES2501 Fingerprint Sensor</b>
-		bcdDevice					6.23
-		iManufacturer				0
-		iProduct					1 Fingerprint Sensor
-		iSerial						0
-		bNumConfigurations			1
-		...
-		...</pre>
+			<dd><pre class="terminal">
+Bus 001 Device 002: ID 0846:4260 NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
+Device Descriptor:
+	bLength						18
+	bDescriptorType				1
+	bcdUSB						2.00
+	bDeviceClass				0 (Defined at Interface level)
+	bDeviceSubClass				0
+	bDeviceProtocol				0
+	bMaxPacketSize0				64
+	idVendor					0x0846 NetGear, Inc.
+	idProduct					0x4260 <b>WG111v3 54 Mbps Wireless [realtek RTL8187B]</b>
+	bcdDevice					2.00
+	iManufacturer				1
+	iProduct					2
+	iSerial						3
+	...
+	...
+
+Bus 002 Device 003: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
+Device Descriptor:
+	bLength						18
+	bDescriptorType				1
+	bcdUSB						1.10
+	bDeviceClass				255 Vendor Specific Class
+	bDeviceSubClass				255 Vendor Specific Subclass
+	bDeviceProtocol				255 Vendor Specific Protocol
+	bMaxPacketSize0				8
+	idVendor					0x08ff AuthenTec, Inc.
+	idProduct					0x2580 <b>AES2501 Fingerprint Sensor</b>
+	bcdDevice					6.23
+	iManufacturer				0
+	iProduct					1 Fingerprint Sensor
+	iSerial						0
+	bNumConfigurations			1
+	...
+	...
+			</pre>
 			</dd>
 			<dd class="note"><b>Hinweis:</b> Die Gerätebezeichnung wird in der Zeile „idProduct“ nach dem Doppelpunkt
 				angegeben (siehe Text in Fettdruck).</dd>
@@ -364,7 +354,12 @@
 			<dd><pre class="terminal">sudo lspci -nnk</pre>
 			</dd>
 			<dd>Es sollte eine Hardwareliste ähnlich der folgenden angezeigt werden:</dd>
-			<dd><pre class="terminal">03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [<b>14e4:4311</b>]<br>(rev 02)<br>				Kernel driver in use: b43-pci-bridge<br>				Kernel modules: ssb<br>05:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8400M GS]<br>[<b>10de:0427</b>] (rev a1)<br>				Kernel modules: nouveau, nvidiafb</pre>
+			<dd><pre class="terminal">
+03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [<b>14e4:4311</b>] (rev 02)
+	Kernel driver in use: b43-pci-bridge
+	Kernel modules: ssb
+05:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8400M GS] [<b>10de:0427</b>] (rev a1)
+	Kernel modules: nouveau, nvidiafb</pre>
 			</dd>
 			<dd class="note"><b>Hinweis:</b> Die Zeichenfolgen in <b>fetter Schrift</b> und in den eckigen Klammern […
 				<strong>:</strong> …] sind die Daten, nach denen Sie gesucht haben. Die erste Zeichengruppe (vor dem
diff --git a/h-source/Application/Views/Help/index_es.php b/h-source/Application/Views/Help/index_es.php
index a22371d..07c8c7e 100644
--- a/h-source/Application/Views/Help/index_es.php
+++ b/h-source/Application/Views/Help/index_es.php
@@ -257,31 +257,20 @@
 		<dt name="model-name" id="model-name">How to discover the model name of your device (if it is not a notebook)</dt>
 			<dd class="opt">If the device is integrated (example: a video card)</dd>
 			<dd>Open a terminal and type the following command:</dd>
-			<dd><pre class="terminal">lspci -vmm</pre>
+			<dd><pre class="terminal">lspci</pre>
 			</dd>
 			<dd>or</dd>
-			<dd><pre class="terminal">lspci -vmm &gt; FILENAME          # output to a file</pre>
+			<dd><pre class="terminal">lspci &gt; FILENAME          # output to a file</pre>
 			</dd>
 			<!-- dd>where "filename" is the name of the file</dd -->
 			<dd>You will obtain the list of your PCI devices, similar to the one written below</dd>
-			<dd><pre class="terminal">Slot:03:00.0
-	Class:Network controller
-	Vendor:Broadcom Corporation
-	Device:<b>BCM4311 802.11b/g WLAN</b>
-	SVendor:Hewlett-Packard Company
-	SDevice:Device 1375
-	Rev:02
-	
-	Slot:07:05.0
-	Class:FireWire (IEEE 1394)
-	Vendor:Ricoh Co Ltd
-	Device:<b>R5C832 IEEE 1394 Controller</b>
-	SVendor:Hewlett-Packard Company
-	SDevice:Device 30cf
-	Rev:05
-	ProgIf:10</pre>
+			<dd><pre class="terminal">
+00:18.3 Host bridge: <b>Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control</b>
+03:00.0 Network controller: <b>Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)</b>
+05:00.0 VGA compatible controller: <b>nVidia Corporation G86 [GeForce 8400M GS] (rev a1)</b>
+			</pre>
 			</dd>
-			<dd>The name of each device is written at the "Device" row, after the colon (see the text in bold in the above
+			<dd>The name of each device is written after the colon (see the text in bold in the above
 			list)</dd>
 			<dd class="opt">If the device is an USB device (example: an external USB wifi card)</dd>
 			<dd>Open a terminal and type the following command:</dd>
@@ -292,8 +281,9 @@
 			</dd>
 		<!-- dd>where "filename" is the name of the file</dd -->
 			<dd>You will obtain the list of your USB devices, similar to the one written below</dd>
-			<dd><pre class="terminal">Bus 001 Device 002: ID 0846:4260 NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
-	Device Descriptor:
+			<dd><pre class="terminal">
+Bus 001 Device 002: ID 0846:4260 NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
+Device Descriptor:
 	bLength						18
 	bDescriptorType				1
 	bcdUSB						2.00
@@ -307,11 +297,11 @@
 	iManufacturer				1
 	iProduct					2
 	iSerial						3
-	 ...
-	 ...
-	
-	Bus 002 Device 003: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
-	Device Descriptor:
+	...
+	...
+
+Bus 002 Device 003: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
+Device Descriptor:
 	bLength						18
 	bDescriptorType				1
 	bcdUSB						1.10
@@ -326,8 +316,9 @@
 	iProduct					1 Fingerprint Sensor
 	iSerial						0
 	bNumConfigurations			1
-	 ...
-	 ...</pre>
+	...
+	...
+		</pre>
 			</dd>
 			<dd>The name of each device is written at the row starting with "idProduct" (see the text in bold in the above
 			list)</dd>
@@ -362,10 +353,11 @@
 			<dd><pre class="terminal">sudo lspci -nnk</pre>
 			</dd>
 			<dd>Debe de obtener una lista de hardware similar a la escriba debajo</dd>
-			<dd><pre class="terminal">03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [<b>14e4:4311</b>] (rev 02)
+			<dd><pre class="terminal">
+03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [<b>14e4:4311</b>] (rev 02)
 	Kernel driver in use: b43-pci-bridge
 	Kernel modules: ssb
-	05:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8400M GS] [<b>10de:0427</b>] (rev a1)
+05:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8400M GS] [<b>10de:0427</b>] (rev a1)
 	Kernel modules: nouveau, nvidiafb</pre>
 			</dd>
 			<dd>Las cadenas en <b>negritas</b> y colocadas en los corchetes (en la lista superior) son los códigos que esta
@@ -378,9 +370,10 @@
 			<dd><pre class="terminal">sudo lsusb</pre>
 			</dd>
 			<dd>Debe de obtener una lista de hardware similar a la descrita a continuación</dd>
-			<dd><pre class="terminal">Bus 001 Device 002: ID <b>0846:4260</b> NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
-	Bus 001 Device 001: ID <b>1d6b:0002</b> Linux Foundation 2.0 root hub
-	Bus 002 Device 003: ID <b>08ff:2580</b> AuthenTec, Inc. AES2501 Fingerprint Sensor</pre>
+			<dd><pre class="terminal">
+Bus 001 Device 002: ID <b>0846:4260</b> NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
+Bus 001 Device 001: ID <b>1d6b:0002</b> Linux Foundation 2.0 root hub
+Bus 002 Device 003: ID <b>08ff:2580</b> AuthenTec, Inc. AES2501 Fingerprint Sensor</pre>
 			</dd>
 			<dd>Las cadenas en <b>negritas</b> (en la lista superior) son el código que busca. El primer grupo de dígitos
 				(antes de los dos puntos) son el <b>VendorID</b>, el segundo grupo de dígitos son el <b>ProductID</b>. En el
diff --git a/h-source/Application/Views/Help/index_fr.php b/h-source/Application/Views/Help/index_fr.php
index f52d24b..a20d9a8 100644
--- a/h-source/Application/Views/Help/index_fr.php
+++ b/h-source/Application/Views/Help/index_fr.php
@@ -253,31 +253,20 @@
 		<dt><a name="model-name">How to discover the model name of your device (if it is not a notebook)</a></dt>
 			<dd class="opt">If the device is integrated (example: a video card)</dd>
 			<dd>Open a terminal and type the following command:</dd>
-			<dd><pre class="terminal">lspci -vmm</pre>
+			<dd><pre class="terminal">lspci</pre>
 			</dd>
 			<dd>or</dd>
-			<dd><pre class="terminal">lspci -vmm &gt; FILENAME          # output to a file</pre>
+			<dd><pre class="terminal">lspci &gt; FILENAME          # output to a file</pre>
 			</dd>
 			<!-- dd>where "filename" is the name of the file</dd -->
 			<dd>You will obtain the list of your PCI devices, similar to the one written below</dd>
-			<dd><pre class="terminal">Slot:03:00.0
-	Class:Network controller
-	Vendor:Broadcom Corporation
-	Device:<b>BCM4311 802.11b/g WLAN</b>
-	SVendor:Hewlett-Packard Company
-	SDevice:Device 1375
-	Rev:02
-	
-	Slot:07:05.0
-	Class:FireWire (IEEE 1394)
-	Vendor:Ricoh Co Ltd
-	Device:<b>R5C832 IEEE 1394 Controller</b>
-	SVendor:Hewlett-Packard Company
-	SDevice:Device 30cf
-	Rev:05
-	ProgIf:10</pre>
+			<dd><pre class="terminal">
+00:18.3 Host bridge: <b>Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control</b>
+03:00.0 Network controller: <b>Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)</b>
+05:00.0 VGA compatible controller: <b>nVidia Corporation G86 [GeForce 8400M GS] (rev a1)</b>
+			</pre>
 			</dd>
-			<dd>The name of each device is written at the "Device" row, after the colon (see the text in bold in the above
+			<dd>The name of each device is written after the colon (see the text in bold in the above
 			list)</dd>
 			<dd class="opt">If the device is an USB device (example: an external USB wifi card)</dd>
 			<dd>Open a terminal and type the following command:</dd>
@@ -288,8 +277,9 @@
 			</dd>
 			<!-- dd>where "filename" is the name of the file</dd -->
 			<dd>You will obtain the list of your USB devices, similar to the one written below</dd>
-			<dd><pre class="terminal">Bus 001 Device 002: ID 0846:4260 NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
-	Device Descriptor:
+			<dd><pre class="terminal">
+Bus 001 Device 002: ID 0846:4260 NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
+Device Descriptor:
 	bLength						18
 	bDescriptorType				1
 	bcdUSB						2.00
@@ -303,11 +293,11 @@
 	iManufacturer				1
 	iProduct					2
 	iSerial						3
-	 ...
-	 ...
-	
-	Bus 002 Device 003: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
-	Device Descriptor:
+	...
+	...
+
+Bus 002 Device 003: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
+Device Descriptor:
 	bLength						18
 	bDescriptorType				1
 	bcdUSB						1.10
@@ -322,8 +312,9 @@
 	iProduct					1 Fingerprint Sensor
 	iSerial						0
 	bNumConfigurations			1
-	 ...
-	 ...</pre>
+	...
+	...
+			</pre>
 			</dd>
 			<dd>The name of each device is written at the row starting with "idProduct" (see the text in bold in the above
 			list)</dd>
@@ -353,10 +344,11 @@
 			<dd><pre class="terminal">sudo lspci -nnk</pre>
 			</dd>
 			<dd>Vous devriez obtenir une liste de matériel similaire à celle-ci</dd>
-			<dd><pre class="terminal">03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [<b>14e4:4311</b>] (rev 02)
+			<dd><pre class="terminal">
+03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [<b>14e4:4311</b>] (rev 02)
 	Kernel driver in use: b43-pci-bridge
 	Kernel modules: ssb
-	05:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8400M GS] [<b>10de:0427</b>] (rev a1)
+05:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8400M GS] [<b>10de:0427</b>] (rev a1)
 	Kernel modules: nouveau, nvidiafb</pre>
 			</dd>
 			<dd class="note"><span class="note">Note :</span>Les lignes en <b>gras</b> et placée entre crochet (dans la liste
@@ -368,9 +360,10 @@
 			<dd><pre class="terminal">sudo lsusb</pre>
 			</dd>
 			<dd>Vous devriez obtenir une liste de matériel similaire à celle ci</dd>
-			<dd><pre class="terminal">Bus 001 Device 002: ID <b>0846:4260</b> NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
-	Bus 001 Device 001: ID <b>1d6b:0002</b> Linux Foundation 2.0 root hub
-	Bus 002 Device 003: ID <b>08ff:2580</b> AuthenTec, Inc. AES2501 Fingerprint Sensor</pre>
+			<dd><pre class="terminal">
+Bus 001 Device 002: ID <b>0846:4260</b> NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
+Bus 001 Device 001: ID <b>1d6b:0002</b> Linux Foundation 2.0 root hub
+Bus 002 Device 003: ID <b>08ff:2580</b> AuthenTec, Inc. AES2501 Fingerprint Sensor</pre>
 			</dd>
 			<dd class="note"><span class="note">Note :</span> Les lignes en <b>gras</b> (dans la liste du dessus) sont les
 				lignes que vous recherchez. Les premiers nombres (avant les deux points) sont le <b>VendorID</b>, les autres sont
diff --git a/h-source/Application/Views/Help/index_it.php b/h-source/Application/Views/Help/index_it.php
index 3012026..12fe981 100644
--- a/h-source/Application/Views/Help/index_it.php
+++ b/h-source/Application/Views/Help/index_it.php
@@ -255,31 +255,20 @@
 		<dt name="model-name">Come scoprire il nome del modello del tuo hardware (se non è un portatile)</dt>
 			<dd class="opt">Se il dispositivo è integrato (ad esempio: una scheda video)</dd>
 			<dd>Apri un terminale e digita il seguente comando:</dd>
-			<dd><pre class="terminal">lspci -vmm</pre>
+			<dd><pre class="terminal">lspci</pre>
 			</dd>
 			<dd>o</dd>
-			<dd><pre class="terminal">lspci -vmm &gt; FILENAME          # Puoi anche scrivere l'output del comandi lspci su un file digitando<!-- l'output del comandi un file digitando :)--></pre>
+			<dd><pre class="terminal">lspci &gt; FILENAME          # Puoi anche scrivere l'output del comandi lspci su un file digitando<!-- l'output del comandi un file digitando :)--></pre>
 			</dd>
 		<!-- dd>dove "filename" è il nome del file</dd -->
 			<dd>Otterrai la lista di tutti i tuoi dispositivi PCI, simile a quella scritta sotto</dd>
-			<dd><pre class="terminal">Slot:03:00.0
-	Class:Network controller
-	Vendor:Broadcom Corporation
-	Device:<b>BCM4311 802.11b/g WLAN</b>
-	SVendor:Hewlett-Packard Company
-	SDevice:Device 1375
-	Rev:02
-	
-	Slot:07:05.0
-	Class:FireWire (IEEE 1394)
-	Vendor:Ricoh Co Ltd
-	Device:<b>R5C832 IEEE 1394 Controller</b>
-	SVendor:Hewlett-Packard Company
-	SDevice:Device 30cf
-	Rev:05
-	ProgIf:10</pre>
+			<dd><pre class="terminal">
+00:18.3 Host bridge: <b>Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control</b>
+03:00.0 Network controller: <b>Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)</b>
+05:00.0 VGA compatible controller: <b>nVidia Corporation G86 [GeForce 8400M GS] (rev a1)</b>
+			</pre>
 			</dd>
-			<dd>Il nome di ogni device è scritto alla riga "Device", dopo i due punti (guarda il testo in grassetto nella
+			<dd>Il nome di ogni dispositivo è scritto dopo i due punti (guarda il testo in grassetto nella
 				lista superiore)</dd>
 			<dd class="opt">Se è un dispositivo USB (ad esempio: una stampante USB)</dd>
 			<dd>Apri un terminale e digita il seguente comando:</dd>
@@ -290,42 +279,44 @@
 			</dd>
 			<!-- dd>dove "filename" è il nome del file</dd -->
 			<dd>Otterrai la lista di tutti i dispositivi USB, simile a quella sxcritta sotto</dd>
-			<dd><pre class="terminal">Bus 001 Device 002: ID 0846:4260 NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
-		Device Descriptor:
-		bLength 18
-		bDescriptorType 1
-		bcdUSB 2.00
-		bDeviceClass 0 (Defined at Interface level)
-		bDeviceSubClass 0
-		bDeviceProtocol 0
-		bMaxPacketSize0 64
-		idVendor 0x0846 NetGear, Inc.
-		idProduct 0x4260 <b>WG111v3 54 Mbps Wireless [realtek RTL8187B]</b>
-		bcdDevice 2.00
-		iManufacturer 1
-		iProduct 2
-		iSerial 3
-		...
-		...
-	
-		Bus 002 Device 003: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
-		Device Descriptor:
-		bLength 18
-		bDescriptorType 1
-		bcdUSB 1.10
-		bDeviceClass 255 Vendor Specific Class
-		bDeviceSubClass 255 Vendor Specific Subclass
-		bDeviceProtocol 255 Vendor Specific Protocol
-		bMaxPacketSize0 8
-		idVendor 0x08ff AuthenTec, Inc.
-		idProduct 0x2580 <b>AES2501 Fingerprint Sensor</b>
-		bcdDevice 6.23
-		iManufacturer 0
-		iProduct 1 Fingerprint Sensor
-		iSerial 0
-		bNumConfigurations 1
-		...
-		...</pre>
+			<dd><pre class="terminal">
+Bus 001 Device 002: ID 0846:4260 NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
+Device Descriptor:
+	bLength 18
+	bDescriptorType 1
+	bcdUSB 2.00
+	bDeviceClass 0 (Defined at Interface level)
+	bDeviceSubClass 0
+	bDeviceProtocol 0
+	bMaxPacketSize0 64
+	idVendor 0x0846 NetGear, Inc.
+	idProduct 0x4260 <b>WG111v3 54 Mbps Wireless [realtek RTL8187B]</b>
+	bcdDevice 2.00
+	iManufacturer 1
+	iProduct 2
+	iSerial 3
+	...
+	...
+
+Bus 002 Device 003: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
+Device Descriptor:
+	bLength 18
+	bDescriptorType 1
+	bcdUSB 1.10
+	bDeviceClass 255 Vendor Specific Class
+	bDeviceSubClass 255 Vendor Specific Subclass
+	bDeviceProtocol 255 Vendor Specific Protocol
+	bMaxPacketSize0 8
+	idVendor 0x08ff AuthenTec, Inc.
+	idProduct 0x2580 <b>AES2501 Fingerprint Sensor</b>
+	bcdDevice 6.23
+	iManufacturer 0
+	iProduct 1 Fingerprint Sensor
+	iSerial 0
+	bNumConfigurations 1
+	...
+	...
+			</pre>
 			</dd>
 			<dd>Il nome di ogni dispositivo è scritto alla riga che inizia con la stringa "idProduct" (guarda il testo in
 				grassetto nella lista superiore)</dd>
@@ -355,12 +346,12 @@
 			<dd><pre class="terminal">sudo lspci -nnk</pre>
 			</dd>
 			<dd>Dovresti ottenere una lista di hardware simile a quella scritta qui sotto</dd>
-			<dd><pre class="terminal"> 03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [<b>14e4:4311</b>] (rev 02)
-		Kernel driver in use: b43-pci-bridge
-		Kernel modules: ssb
-		05:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8400M GS] [<b>10de:0427</b>] (rev a1)
-		Kernel modules: nouveau, nvidiafb</pre>
-			</dd>
+			<dd><pre class="terminal">
+03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [<b>14e4:4311</b>] (rev 02)
+	Kernel driver in use: b43-pci-bridge
+	Kernel modules: ssb
+05:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8400M GS] [<b>10de:0427</b>] (rev a1)
+	Kernel modules: nouveau, nvidiafb</pre>
 			<dd class="note"><span class="note">Note:</span> Le stringhe in <b>grassetto</b> e tra parentesi quadre (nella
 				lista qui sopra) sono il codice che stai cercando. Il primo gruppo di cifre (prima dei due punti) è il
 				<b>VendorID</b>, il secondo gruppo è il <b>ProductID</b>. Nell'esempio qui sopra: il codice VendorID:ProductID
@@ -371,9 +362,10 @@
 			<dd><pre class="terminal">sudo lsusb</pre>
 			</dd>
 			<dd>Dovresti ottenere una lista di hardware simile a quella scritta qui sotto</dd>
-			<dd><pre class="terminal"> Bus 001 Device 002: ID <b>0846:4260</b> NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
-		Bus 001 Device 001: ID <b>1d6b:0002</b> Linux Foundation 2.0 root hub
-		Bus 002 Device 003: ID <b>08ff:2580</b> AuthenTec, Inc. AES2501 Fingerprint Sensor</pre>
+			<dd><pre class="terminal">
+Bus 001 Device 002: ID <b>0846:4260</b> NetGear, Inc. WG111v3 54 Mbps Wireless [realtek RTL8187B]
+Bus 001 Device 001: ID <b>1d6b:0002</b> Linux Foundation 2.0 root hub
+Bus 002 Device 003: ID <b>08ff:2580</b> AuthenTec, Inc. AES2501 Fingerprint Sensor</pre>
 			</dd>
 			<dd class="note"><span class="note">Note:</span> Le stringhe in <b>grassetto</b> (nella lista qui sopra) sono il
 				codice che stai cercando. Il primo gruppo di cifre (prima dei due punti) è il <b>VendorID</b>, il secondo gruppo
diff --git a/h-source/Public/Css/main.css b/h-source/Public/Css/main.css
index 6e0b548..fa7097c 100644
--- a/h-source/Public/Css/main.css
+++ b/h-source/Public/Css/main.css
@@ -1873,6 +1873,41 @@ Start - temporarily added due to transformation of help pages
 	font-weight: bold;
 	font-style: italic;
 }
+
+.help_external_box h2,.help_external_box  h3,.help_external_box  h4
+{
+	margin: 0 4px 0 0;
+	padding: 0.2em 0 0.3em 1.25em;
+	font-size: 1.4em;
+	color: #353535;
+	background: #D8FF9E;
+}
+.help_external_box h2
+{
+	font-size: 1.3em;
+	color: #3D6300;
+}
+.help_external_box h3
+{
+	font-size: 1.2em;
+	color: #3D6300;
+	background-color: White;
+}
+.help_external_box h4
+{
+	font-size: 1.1em;
+	color: #3D6300;
+	background-color: White;
+}
+.help_external_box p.terminal,.help_external_box pre.terminal
+{
+	font-family: monospace;
+	padding: .5em 1em;
+	background-color: rgb(50,50,50);
+	border-left: 2px solid rgb(97,97,97);
+	color: white;
+}
+
 /*
 End
 */